Traxxas 5338R Red-Anodized Aluminum TUBES Lightweight Turnbuckle set of 2

#ad
#ad
Traxxas TRA5338R #ad - Toe links, revo tubes red-anodized, rear 4/ rod ends, fits front or rear 2/ rod ends, 7075-t6 aluminum, stronger than titanium 128mm, front 4/ aluminum wrench 1 Lightweight Aluminum Turnbuckles 30% lighter than steel, more than double the strength of titanium! TUBES add a high-tech stealth look to Revo and Maxx trucks.

Lightweight aluminum Turnbuckles 30% lighter than steel, more than double the strength of titanium. These are the strongest toe links you can buy for your Maxx or Revo. Metric aluminum wrench is included for adjustment. 4-times stiffer and more than double the strength of aftermarket titanium. A handy machined groove on one end easily identifies the left hand threads.

Traxxas 5338R Red-Anodized Aluminum TUBES Lightweight Turnbuckle set of 2 #ad - Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. The secret is in the unique hollow tube design that maximizes stiffness and resistance to bending, while at the same time reducing weight.

A handy machined groove on one end easily identifies the left hand threads. 7075-t6 aluminum Anodized red.

More information about Traxxas TRA5338R #ad

Traxxas 5318X Red-Anodized Aluminum Pushrod pair

#ad
#ad
Traxxas TRA5318X #ad - 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Push rod aluminum assembled with rod ends 2 use with long travel or #5357 progressive-1 rockers Revo & Summit’s linkage based suspension requires different push rod assemblies depending upon which rockers are used.

These spacers are included with the progressive-2 rockers. 102mm Length. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. Anodized red 7075-T6 aluminum. Rod ends are already installed making it simple to just bolt them on the truck.

Traxxas 5318X Red-Anodized Aluminum Pushrod pair #ad - Rod ends are already installed making it simple to just bolt them on the truck. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Strong, 7075-t6 aluminum versions of each are available to decrease the total weight of the truck by 31 grams.

Rod ends included. Use with long travel or #5357 progressive-1 rockers.

More information about Traxxas TRA5318X #ad


Similar products



Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo

#ad
#ad
Traxxas 5632 #ad - Installs in minutes. Includes mounting screws. This product is made from high quality materials and designed for long-lasting performance. Fits 1/10 scale E-Revo and Summit. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Use with long travel or #5357 progressive-1 rockers.

Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Rod ends are already installed making it simple to just bolt them on the truck. Strengthen your e-revo or Summit with this brilliant blue-anodized chassis brace to conquer massive jumps. 102mm Length. Mounting screws are included.

Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo #ad - Brilliant blue-anodized aluminum. What's in the box chassis brace; mounting screws 3 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Rod ends included. Anodized red 7075-T6 aluminum.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

More information about Traxxas 5632 #ad


Similar products



Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots

#ad
#ad
Traxxas TRA5451R #ad - Traxxas steel constant velocity Driveshafts are designed to handle the extreme horsepower and articulation that a T-Maxx or Revo can dish out. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Use with long travel or #5357 progressive-1 rockers. Anodized red 7075-T6 aluminum.

102mm Length. Brilliant blue-anodized aluminum. This product is made from high quality materials and designed for long-lasting performance. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks.

Traxxas 5451R Revo/Maxx Steel CV Driveshafts Assembled with Boots #ad - These are simply the most advanced steel CV driveshafts available. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out. Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.

Fits 1/10 scale E-Revo and Summit. T-maxx models #4902, 4908, 4909, Revo 3.3 models #5308, 5309, e-revo model #5605 and E-Maxx model #3905 only.

More information about Traxxas TRA5451R #ad


Similar products



Traxxas 5650R Steel Constant-Velocity Center Driveshafts

#ad
#ad
Traxxas TRA5650R #ad - Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Fits e-revo, summit, and E-Revo Brushless Edition. Fits 1/10 scale E-Revo and Summit. This product is made from high quality materials and designed for long-lasting performance.

102mm Length. Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks.

Strengthens rear chassis for massive jumps. Rod ends are already installed making it simple to just bolt them on the truck. U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.

Traxxas 5650R Steel Constant-Velocity Center Driveshafts #ad - Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts. The nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents not only look good, they are designed to exacting specifications for ultimate strength and performance. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

More information about Traxxas TRA5650R #ad


Similar products



RPM Revo True-Track Rear A-Arm Conversion Kit, Blue

#ad
#ad
HRP Distribution RPM80565 #ad - One kit will complete the entire rear end of any Revo. 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams. Anodized red 7075-T6 aluminum. All aspects of the rpm true-track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel.

Proudly made in the USA. Brilliant blue-anodized aluminum. Rod ends are already installed making it simple to just bolt them on the truck. These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless. Rod ends included. Strengthens rear chassis for massive jumps. Complete kit includes front and rear driveshafts, ready to install.

RPM Revo True-Track Rear A-Arm Conversion Kit, Blue #ad - U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. By getting rid of the rear toe links, we've completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain.

Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements.

More information about HRP Distribution RPM80565 #ad


Similar products



RPM Revo A-Arm Front Right, Blue

#ad
#ad
HRP Distribution RPM80215 #ad - Proudly made in the USA. Sold in sets of one upper and one lower A-arm. Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts. Excess a-arm endplay has been eliminated for more accurate caster and toe angle settings. Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out.

Designed to increase durability. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out. Available in black, blue, & dye able white. Brilliant blue-anodized aluminum. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Revo black front A-arms Revo Black Rear A-arms.

RPM Revo A-Arm Front Right, Blue #ad - Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless. Massive shock rod mounting areas for improved rigidity. Complete kit includes front and rear driveshafts, ready to install.

Angled leading and trailing edges eliminate dirt build-up.

More information about HRP Distribution RPM80215 #ad


Similar products



Traxxas 5378X Pivot Ball Caps and Dust Boots set of four

#ad
#ad
Traxxas TRA5378X #ad - Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Replaces weaker stock components. This product is made from high quality materials and designed for lasting performance.

This product is made from high quality materials and designed for long-lasting performance. One kit will complete the entire rear end of any Revo. This is for use on RC vehicles, consult your user's manual for exact parts listings. Req. These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless.

Traxxas 5378X Pivot Ball Caps and Dust Boots set of four #ad - This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Set of four pivot ball caps. Complete kit includes front and rear driveshafts, ready to install. Strengthens rear chassis for massive jumps. Rod ends are already installed making it simple to just bolt them on the truck.

Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out. To complete truck use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

More information about Traxxas TRA5378X #ad


Similar products



Traxxas 5319X Red-Anodized Aluminum Pushrods with Rod Ends Progressive 3 pair

#ad
#ad
Traxxas TRA5319X #ad - Use with long travel or #5357 progressive-1 rockers. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Designed to increase durability. When using progressive-2 rockers, spacers part # 5133 are required for use with the 5318 or 5318X push rods.

These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless. This is for use on RC vehicles, consult your user's manual for exact parts listings. Includes dust boots, rubber 4/ dust plugs, black 4, rubber 4/ dust boot retainers, blue 4.2 packages required to complete truck.

Traxxas 5319X Red-Anodized Aluminum Pushrods with Rod Ends Progressive 3 pair #ad - This product is made from high quality materials and designed for long-lasting performance. Anodized red 7075-T6 aluminum. One kit will complete the entire rear end of any Revo. Rod ends included. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Strengthens rear chassis for massive jumps.

Requires spacers for use with other rockers.

More information about Traxxas TRA5319X #ad


Similar products



RPM 80585 Revo Axle Carriers and Bearings, Blue

#ad
#ad
RPM RPM80585 #ad - Sold in sets of one upper and one lower A-arm. This product is made from high quality materials and designed for lasting performance. Rod ends are already installed making it simple to just bolt them on the truck. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Set of four pivot ball caps. Fits all revo, e-Revo & Slayer trucks. This is for use on RC vehicles, consult your user's manual for exact parts listings. Designed to increase durability. Proudly made in the USA. Proudly made in the USA. These rear end kits work on all versions of the Traxxas Revo, including the e-Revo and e-Revo brushless.

RPM 80585 Revo Axle Carriers and Bearings, Blue #ad - Steel constant velocity driveshafts for 1/10 Revo and T/E Maxx trucks. Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents provide head-turning looks. Complete kit includes front and rear driveshafts, ready to install. Includes dust boots, black 4, rubber 4/ dust plugs, rubber 4/ dust boot retainers, blue 4.

2 packages required to complete truck. Use with long travel or #5357 progressive-1 rockers.

More information about RPM RPM80585 #ad


Similar products



Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit

#ad
#ad
Traxxas TRA5352R #ad - Replaces weaker stock components. Rod ends are already installed making it simple to just bolt them on the truck. Complete set of four shafts; pre-assembled; includes screw pins and wheel nuts. Anodized red 7075-T6 aluminum. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

Use with long travel or #5357 progressive-1 rockers. Heavy-duty slipper clutch rebuild kit. 1 left and 1 right axle carrier. Includes dust boots, black 4, rubber 4/ dust plugs, rubber 4/ dust boot retainers, blue 4.2 packages required to complete truck. 7075-t6 aluminum push rods decrease the total weight of the truck by 31 grams.

Traxxas 5352R Heavy-Duty Slipper Clutch Rebuild Kit #ad - Fits all modern t-maxx and E-Maxx trucks running stock 5451X axles . One kit will complete the entire rear end of any Revo. Use with #5359 progressive 3 rockers. Proudly made in the USA. Set of four pivot ball caps. Designed to increase durability. Designed to handle the extreme horsepower and articulation that your Traxxas truck can dish out.

More information about Traxxas TRA5352R #ad


Similar products