As an Amazon Associate I earn from qualifying purchases.
Walker Partners #ad - Easy to use: the welder can lift a single tungsten electrode out with welding gloves on. Sturdy: made with hard metal Stainless Steel and using a 50 lb magnet to hold it in place. Easy to store: just pull tungsten holder off your fabrication table and stick it to a metal surface ready for your next TIG weld.
Mag-Mate #ad - Magnetic base allows for quick and easy placement and repositioning. Securely and neatly hold TIG torch in place on top or under work bench or any nearby steel structure. Made in the USA. Prevents damage to torch tips. Stainless steel holder, plated steel magnetic base.
ARC-ZONE .COM #ad - The magnet is screwed into the body with a stainless steel screw for long, trouble free use. 1/8" 3. 2mm diameter electrodes. Strong 12. 5lbs pull rated neodymium rare-earth magnet located in the base.
RIVERWELD #ad - Each size one collet 1/16" & 1. 6 and 3/32" & 2. 4mm. Each size one collet body 1/16" & 1. 6 and 3/32" & 2. 4mm. Manual gripper of tungsten Grinder Sharpener for 18-180mm Length of Tungsten Electrode.
Starrett #ad - Secures into place - it offers a special tapered collet for an improved grip and a maximum clamping surface for excellent performance in every application. Available in a wide variety of collet, handle, and length variations.
Switching made easy - the starrett's Pin Vise handles are reduced in size, so it can be easily rotated between thumb and finger when filing small work. Convenient - our starrett tool features a smaller body diameter than the chuck for fast opening, closing and rapid rotation for precision work ensuring quality results.
Generic #ad - Protect your valuable welding rod accessories with a wall mount shelf. Quality product: made in the USA by Speed Fabrication. Space saver: keep work bench free of clutter and easy reach.
Works well with Speed Fabrication hose hooks and single grinder holders. Material: powder coated 16-gauge steel welding rod holder can hold up to 40lbs of rods.
Weldmonger #ad - Pocket size durable design ideal for any tig job. Great for hobbyists and industrial welders. Finish that long pass without burning your fingers. Increases the lifespan of your tig glove.
AWLOLWA #ad - Applicable Scope: TIG. Copper material Electrode clip, a very small amount of impurities. Fit for: tig wp-17/18/26. 63pcs tig welding Torch Accessories Kit. Type: welding accessories.
Fox Alloy #ad - You may need such a welding wire feeding pen which is simply rolling the rubber wheel with your index finger, manual control uniform speed wire, the pencil can provide a precision and consistent feed of TIG rod which can help you better control of welding wire, save more time and improve the efficiency of your work and get better welding effect.
If you usually use 1. 0mm-3. 2mm or 1/32''-1/8'' in inch welding rod, very comfortable and anti-slip when using. Service: fox alloy time-proven formulation; Advanced manufacturing facilities; A team of experienced welding engineers ready to answer all your welding questions.
0mm welding rod. Material: the tig-pen is made of high grade aluminum, and the TIG welding wire feeder smooth-faced compact and lightweight. Advantage: this tig welding finger feeder will keep your fingers safe and create better quality weld results. Standard: the tig filler rod feeder pen is an efficient tool when you are doing tig welding work, it also lightweight feeder similar as a pen about 0
1. Walker Partners
#adTungsten Electrode Dispenser/Tungsten Electrode Holder/Magnetic Tungsten Hanging holder/Electrode/Welding Accessory
#adMore information #ad
Quality: made in the usA with Superior Material, Stainless steel and ceramic magnet. Convenient: hangs off the side of the welding table, in a place convenient to you.| Brand | Walker Partners #ad |
| Manufacturer | Walker Partners #ad |
| Height | 3.5 Inches |
| Length | 4 Inches |
| Width | 2.5 Inches |
| Part Number | TEH3.5 |
| Model | TEH3.5 |
More information #ad
2. Mag-Mate
#adMAG-MATE WTHT01 Weld Torch Holder Magnet for Tig Torches, 41 lb
#adMore information #ad
| Brand | Mag-Mate #ad |
| Manufacturer | Industrial Magnetics Inc #ad |
| Height | 2.63 Inches |
| Length | 6.75 Inches |
| Weight | 0.75 Pounds |
| Width | 3.12 Inches |
| Part Number | WTHT01 |
| Model | WTHT01 |
More information #ad
3. ARC-ZONE .COM
#adArc-Saber Tungsten Electrode Storage Solution with Magnetic Base
#adMore information #ad
Maximum capacity is 19ea. Store your short electrodes on the jobsite, your tool box, your metal work table. Designed for short 3. 5" 88. 9mm tungsten electrodes. Made in uSA! Durable tungsten storage container constructed of high-impact polyethylene, HDPLA Plus Plastic.| Brand | ARC-ZONE .COM #ad |
| Manufacturer | Arc-Zone.com, Inc #ad |
| Part Number | A-ARCSABR-SB-S |
More information #ad
4. RIVERWELD
#adManual Gripper of Tungsten Grinder Collet Body 1/16" & 1.6 and 3/32" & 2.4mm Sharpener for TIG Welding
#adMore information #ad
| Brand | RIVERWELD #ad |
| Manufacturer | RIVERWELDstore #ad |
| Height | 2.36 Inches |
| Length | 3.54 Inches |
| Weight | 0.13 Kilograms |
| Width | 1.57 Inches |
| Part Number | 3/32" |
More information #ad
5. Starrett
#adOctagonal Handles, Smaller Body Diameter, and Special Tapered Collet for Maximum Clamping Surface, 166C, Starrett Pin Vise with Insulated, .050-.125" Range
#adSwitching made easy - the starrett's Pin Vise handles are reduced in size, so it can be easily rotated between thumb and finger when filing small work. Convenient - our starrett tool features a smaller body diameter than the chuck for fast opening, closing and rapid rotation for precision work ensuring quality results.
More information #ad
Comes in different variations - pin vises are tool holding devices that allow small tools to be held in place with positive acting jaws. Precision tools - our starrett hand tools have been the standard for high quality dimensional measuring tools since 1880, manufactured with excellence and superior workmanship.| Brand | Starrett #ad |
| Manufacturer | Starrett #ad |
| Height | 0.5 Inches |
| Length | 4.9 Inches |
| Weight | 0.07 Pounds |
| Width | 1.2 Inches |
| Part Number | 166C |
| Model | 166C |
More information #ad
6. Generic
#adSpeed Fabrication 4 Slot TIG Welding Rod Holder Wall Mount Organizer, Welding Equipment Storage Rack, Welding Tools Supplies and Accessories
#adWorks well with Speed Fabrication hose hooks and single grinder holders. Material: powder coated 16-gauge steel welding rod holder can hold up to 40lbs of rods.
More information #ad
With the tig rod holder storage rack, you don't have to look for important tools needed for the job at hand. Professional design: 4 tig rod holder Slots Organizer. Organization: perfect storage rack for organizing up to 4 Tig rods with 1/4" pegboard holes to mount anything to the front.| Brand | Generic #ad |
| Manufacturer | Speed Fabrication #ad |
| Height | 8 Inches |
| Length | 12 Inches |
| Width | 4 Inches |
| Part Number | TRH4MB |
More information #ad
7. Weldmonger
#adWeldmonger TIG Finger Heat Shield
#adMore information #ad
| Brand | Weldmonger #ad |
| Manufacturer | Welding Tips & Tricks #ad |
| Height | 20 Inches |
| Length | 20 Inches |
| Weight | 0.2 Pounds |
| Width | 15 Inches |
| Part Number | TIG FINGER |
| Model | TIG FINGER |
More information #ad
8. AWLOLWA
#adAWLOLWA 63PCS TIG Welding Torch Accessories Kit Collets Body Glass Cup Alumina Nozzle Stubby Gas Lens #10 Pyrex Cup Kit for TIG WP-17/18/26 63-PCS
#adMore information #ad
| Brand | AWLOLWA #ad |
| Manufacturer | AIC #ad |
| Part Number | TIG 63PCS |
More information #ad
9. Fox Alloy
#adTig Pen Rod Holder TIG Welding Finger Feeder TIG Wire Feeding Pen Tool Pencil Filler
#adIf you usually use 1. 0mm-3. 2mm or 1/32''-1/8'' in inch welding rod, very comfortable and anti-slip when using. Service: fox alloy time-proven formulation; Advanced manufacturing facilities; A team of experienced welding engineers ready to answer all your welding questions.
More information #ad
Application：this tig pen welding rod holder is designed for tig welding, it can compatible with 1. 0mm to 3. 2mm welding wire, which is 1/32’’-1/8’’ in inch; It can also use minimum diameter 08mm welding wire, but it may has a better use effect over 1. 0mm welding rod. Material: the tig-pen is made of high grade aluminum, and the TIG welding wire feeder smooth-faced compact and lightweight. Advantage: this tig welding finger feeder will keep your fingers safe and create better quality weld results. Standard: the tig filler rod feeder pen is an efficient tool when you are doing tig welding work, it also lightweight feeder similar as a pen about 0
| Brand | Fox Alloy #ad |
| Manufacturer | Fox Alloy #ad |
| Part Number | TPAL1032 |
More information #ad
