As an Amazon Associate I earn from qualifying purchases.
BOSCH #ad - Bosch manufactured carbide tip for long life. Better dust removal with spiral flute design. Sds-plus shank. Most common shallow anchor diameters. Stop collar prevents over-drilling for shallow anchor installations.
Makita #ad - 3-cutter bit tip is engineered for a more accurate hole and longer life. Centering tip features a more aggressive design for faster hole starting. Steel stop collar prevents over-drilling for precise anchor installations such as for drop-in anchor systems.
Makita #ad - Centering tip features a more aggressive design for faster hole starting. 3-cutter bit tip is engineered for a more accurate hole and longer life. Aggressive head geometry in primary cutter engineered for use in concrete.
Makita #ad - Aggressive head geometry in primary cutter engineered for use in concrete. Centering tip features a more aggressive design for faster hole starting. Central guiding action engineered for more accurate holes.
SPKLINE #ad - A taper on the bottom of the driver throat makes contact with the top of the ground rod. Heavy duty, high efficiency, precise and effortless, perfect for commercial and industrial applications. Fantastic work saver.
Standard sds-plus shank 10mm diameter is compatible with Bosch, Hilti, Milwaukee, Dewalt, Makita, Hitachi and all other brand SDS-Plus system rotary hammers and Hammer Drills. It helps to minimize the mushrooming of the rod versus a flat-bottom driver.
Product is packed in a handy transparent plastic tube that is durable and convenient to store and carry. 6-11/16"170mm long and 13/16"20mm diameter socket opening, 3"76mm deep inside the nest, accommodate ground rods up to 3/4" 19mm in diameter. It saves you a lot of pounding with a manual hammer.
BOSCH #ad - Optimized flute design to reduce stress and make the bit run cooler. Optimized brazing and hardening process for top resistanance in reinforced concrete. Optimized brazing and hardening process for long life.
Ideal for general contractors & construction industry that require an extra long flute size sDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers.
Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, project completion delays, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling.
1. BOSCH
#adBOSCH HCSTP2083 1/2 In. x 1-11/16 In. SDS-plus Stop Bit,Silver
#adMore information #ad
| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 0.79 Inches |
| Length | 8.39 Inches |
| Weight | 0.2 Pounds |
| Width | 1.6 Inches |
| Part Number | HCSTP2083 |
| Model | HCSTP2083 |
| Warranty | 30-day money back guarantee, 1 yr warranty |
More information #ad
2. BOSCH
#adBOSCH HCSTP2086 5/8 In. x 2-1/16 In. SDS-plus Stop Bit,Silver
#adBOSCH #ad - Most common shallow anchor diameters. Stop collar prevents over-drilling for shallow anchor installations. Sds-plus shank. Better dust removal with spiral flute design. Bosch manufactured carbide tip for long life.More information #ad
| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 0.91 Inches |
| Length | 8.75 Inches |
| Weight | 0.25 Pounds |
| Width | 1.61 Inches |
| Part Number | HCSTP2086 |
| Model | HCSTP2086 |
| Warranty | 30-day money back guarantee, 1 yr warranty |
More information #ad
3. Makita
#adMakita B-68650 3/8" x 1-1/16" x 4" Sds-Plus Stop Bit, 3-Cutter
#adMore information #ad
Central guiding action engineered for more accurate holes. Aggressive head geometry in primary cutter engineered for use in concrete.| Brand | Makita #ad |
| Manufacturer | Makita #ad |
| Height | 6.69 Inches |
| Length | 0.71 Inches |
| Width | 1.46 Inches |
| Part Number | B-68650 |
| Model | B-68650 |
More information #ad
4. BOSCH
#adBOSCH HCSTP2061 3/8 In. x 1-1/16 In. SDS-plus Stop Bit,Silver
#adBOSCH #ad - Bosch manufactured carbide tip for long life. Stop collar prevents over-drilling for shallow anchor installations. Most common shallow anchor diameters. Better dust removal with spiral flute design. Sds-plus shank.More information #ad
| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 8.08 Inches |
| Length | 0.61 Inches |
| Weight | 0.15 Pounds |
| Width | 1.61 Inches |
| Part Number | HCSTP2061 |
| Model | HCSTP2061 |
| Warranty | 30-day money back guarantee, 1 yr warranty |
More information #ad
5. Makita
#adMakita B-68694 5/8" x 1-1/16" x 5" Sds-Plus Stop Bit, 3-Cutter
#adMore information #ad
Steel stop collar prevents over-drilling for precise anchor installations such as for drop-in anchor systems. Central guiding action engineered for more accurate holes.| Brand | Makita #ad |
| Manufacturer | Makita #ad |
| Height | 7.48 Inches |
| Length | 0.79 Inches |
| Width | 1.46 Inches |
| Part Number | B-68694 |
| Model | B-68694 |
More information #ad
6. Makita
#adMakita B-68703 5/8" x 2-1/16" x 6" Sds-Plus Stop Bit, 3-Cutter
#adMore information #ad
3-cutter bit tip is engineered for a more accurate hole and longer life. Steel stop collar prevents over-drilling for precise anchor installations such as for drop-in anchor systems.| Brand | Makita #ad |
| Manufacturer | Makita #ad |
| Height | 7.48 Inches |
| Length | 0.79 Inches |
| Width | 1.46 Inches |
| Part Number | B-68703 |
| Model | B-68703 |
More information #ad
7. SPKLINE
#ad10mm Diameter Shank Fits Bosch Dewalt Milwaukee Hilti and Other SDS-Plus Rotary Hammer Drills, 13/16"X 6-11/16"20X170mm, SPKLINE SDS-Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods
#adStandard sds-plus shank 10mm diameter is compatible with Bosch, Hilti, Milwaukee, Dewalt, Makita, Hitachi and all other brand SDS-Plus system rotary hammers and Hammer Drills. It helps to minimize the mushrooming of the rod versus a flat-bottom driver.
More information #ad
Industrial grade professional ground rod driver for 5/8" and 3/4" ground rods. One-piece design with proprietary heat-treatment process, fully hardened high quality steel body and thick metal walls meet the demands of frequent use and deliver increased life and durability. Product is packed in a handy transparent plastic tube that is durable and convenient to store and carry. 6-11/16"170mm long and 13/16"20mm diameter socket opening, 3"76mm deep inside the nest, accommodate ground rods up to 3/4" 19mm in diameter. It saves you a lot of pounding with a manual hammer.
| Brand | SPKLINE #ad |
| Manufacturer | SPKLINE #ad |
| Height | 0.98 Inches |
| Length | 6.69 Inches |
| Weight | 0.62 Pounds |
| Width | 0.98 Inches |
More information #ad
8. BOSCH
#adGray, BOSCH HC2011 3/16 In. x 6 In. SDS-plus Bulldog Rotary Hammer Bit
#adMore information #ad
4-flute design for fast dust removal. Proprietary Bosch hardening process results in more holes per bit. Ideal for anchoring and through-hole applications in concrete. Centric tip for optimal hole geometry. Bosch-made carbide tip is tougher and more durable under heavy loads. 15 percent faster compared to S4L.| Brand | BOSCH #ad |
| Manufacturer | Bosch #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0.11 Pounds |
| Width | 0 Inches |
| Part Number | HC2011 |
| Model | HC2011 |
| Warranty | No |
More information #ad
9. Makita
#adDeep HD Drilling for Concrete & Masonry, SDS-Plus Long Drill Bit Set for SDS+ Rotary Hammers, Makita 3 Piece, Carbide Tipped Bits
#adMakita #ad - 3 extra-long makita drill bit set includes: 1 bit of 1/2" x 12" with a 10" maximum drilling depth + 1 bit of 5/8" x 12" with a 10" Maximum drilling depth + 1 Bit of 1" x 10" with a 8" Maximum drilling depth. Easily drill into deep concrete, brick, and masonry longer & more precisely with makita’s reinforced premium tungsten carbide & steel Bit Integrity for unmatched LONG LIFE & SAFE Drilling | The proprietary drill bit flute design allows for maximal concrete removal for both EASE OF USE and EFFECTIVENESS.Ideal for general contractors & construction industry that require an extra long flute size sDS-Plus bits for DEEPER anchoring lengths and DEEPER holes | Engineered in Anjo Aichi, Japan for Makita SDS-Plus Rotary Hammers and also fully compatible with All standard SDS-Plus Rotary Hammers.
More information #ad
Makita’s sds-plus deep drill bit set for sds+ rotary hammers with 3 extra-long & 1" diameter for SMOOTH & reliable drilling into 8-10" reinforced concrete, Heavy-Duty, 5/8", Tungsten Carbide Drill BITS of 1/2", Tile, Premium, Brick & Thick, & Cinder Block applications. Avoid lower priced & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single, project completion delays, One-Piece Bit design are heat forged for STRENGTH and LONGEVITY with a sharp edge Carbide Tip design for maximum impact on masonry/concrete material, allowing for effective and precise drilling.
| Brand | Makita #ad |
| Manufacturer | Makita #ad |
| Height | 3 Inches |
| Length | 13 Inches |
| Weight | 0.71 Pounds |
| Width | 0.75 Inches |
| Part Number | P-01000 |
| Model | P-01000 |
More information #ad
