Top 9 Pocket Hole Screws 1 Inch – Power Tool Accessory Jigs

As an Amazon Associate I earn from qualifying purchases.

1. KREG

#ad

500 Count, 500, Kreg SML-C1-500 1-Inch #8 Coarse Washer-Head Pocket Hole Screws, SML-C1

#ad
KREG #ad - Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Maxi-loc washer head for standard Kreg pocket holes. Case-hardened steel won’t bend, snap, or break. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.
BrandKREG #ad
ManufacturerKreg #ad
Height5 Inches
Length3 Inches
Weight2.27 Pounds
Width4.25 Inches
Part NumberSML-C1 - 500
ModelSML-C1 - 500
Warrantylimited warranty, please call vendor for warranty issues

2. KREG

#ad

1" #7 Coarse-Thread, Kreg SPS-C1-100 Pocket Screws, Pan-Head 100 Count

#ad
KREG #ad - Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Pan-head screws for use with Kreg Micro-Pocket pocket holes. Coarse threads for softwoods, such as pine; and for plywood, MDF, particleboard. Case-hardened steel won’t bend, snap, or break.
BrandKREG #ad
ManufacturerKreg #ad
Height5 Inches
Length2 Inches
Weight0.44 Pounds
Width3 Inches
Part NumberSPS-C1-100
ModelSPS-C1-100
Warrantylimited warranty, please call vendor for warranty issues

3. AUTOTOOLHOME

#ad

Pocket Hole Screws 1" Coarse Fine Thread Self Tapping Screw #2 Square Drive Screw for Pocket Hole Jig Length100pcCoarse 1"

#ad
AUTOTOOLHOME #ad - Smooth shank draws the joint together, The threads on a screw stop partway up the screw shank, which leaves a smooth area below the screw head. Screws have a square-drive head that works with square drive bit to drive screws without the driver slipping.

Pocket hole screws that holds your pieces together to create a strong, long-lasting joint. Perfect for pocket hole jig. Sq2 head, 2-1/2", 1-1/4", length:1", 2", 1-1/2", please choose the length. Thread type: coarse thread and fine thread. Fine thread for hardwoods: Oak, Walnut, Ash, Maple, Birch, Cherry, Hickory. Coarse thread screws work great for these woods, Mahogany, and are also the preferred choice for sheet goods like plywood and MDF. Made of case-hardened steel, high strength and Durable,won't bend, snap, or break .
BrandAUTOTOOLHOME #ad
ManufacturerJYC International Trade Co., Ltd. #ad

4. KREG

#ad

Kreg SPS-F1-500 Pocket Hole Screws 1-Inch #2 Fine Square Drive 500ct

#ad
KREG #ad - Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Pan-head screws for use with Kreg Micro-Pocket pocket holes. Fine threads for hardwoods such as oak, cherry, maple. Case-hardened steel won’t bend, snap, or break.
BrandKREG #ad
ManufacturerKreg #ad
Height5 Inches
Length3 Inches
Weight2.08 Pounds
Width4.25 Inches
Part NumberSPS-F1-500
ModelSPS-F1 - 500
Warrantylimited warranty, please call vendor for warranty issues

5. KREG

#ad

Kreg Zinc SML-C125-250 1-1/4" Coarse Thread Number 8 Coated Pocket Hole Screws 250 Count

#ad
KREG #ad - Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Case-hardened steel won’t bend, snap, or break. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Maxi-loc washer head for standard Kreg pocket holes. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard.
BrandKREG #ad
ManufacturerKreg Enterprises, Inc. #ad
Height1.9 Inches
Length6.4 Inches
Weight1.3 Pounds
Width4.1 Inches
Part NumberSML-C125-250
ModelSML-C125-250
Warrantylimited warranty, please call vendor for warranty issues

6. Hilitchi

#ad

Hilitchi #8 Alloy Steel Zinc Pocket Hole Screws Weather Resistant Square Drive Screws with Square Drive 1 Inch Coarse Thread-280PCS

#ad
Hilitchi #ad - You could either store one specific size or an assortment kit. The overall finish is nice and neat. Standard square groove&clear thread thread clear, deep thread, zinc bright surface, uniform force, not slippery during operation. They are very easy to screw into the wood board.

We have 2 inch, 1 1/4 inch, 1 Inch and an assortment kit. Without burr, sharper screw teeth and it is not easy to slip during operation. Coarse thread and fine thread featuring wide thread, these self-tapping pocket screws could easily driving without bit slipping and wood splitting. Sharp screw tips the sharp tips could reduce the resistance and cracking. We include a square drive and with that, corrosion resistance and rust prevention. We would solve all the problems to your satisfaction.

Plus, high tensity, coarse thread pocket screws can be repeatedly disassembled and reused but the find thread screws can not be disassembled and reused. Quality after-sale service: if you do not satisfy with our products or if you have any questions, please come to us. We have various #8 screws for your choice. Quality after heat treatment modulation, 1 1/2 inch, our pocket screws have higher hardness. Sharp cone point, it could help to drive into the wood board fast.
BrandHilitchi #ad
ManufacturerHilitchi #ad
Part NumberH-XieKLS

7. KREG

#ad

Zinc, 1" #8 Coarse-Thread, Washer-Head 1200 Count, KREG SML-C1-1200 Pocket Screws

#ad
KREG #ad - Case-hardened steel won’t bend, snap, or break. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Maxi-loc washer head for standard Kreg pocket holes.
BrandKREG #ad
ManufacturerKreg Enterprises, Inc. #ad
Height3.6 Inches
Length9 Inches
Weight5 Pounds
Width6.1 Inches
Part NumberSML-C1-1200
ModelSML-C1-1200

8. Trend Enterprises

#ad

Trend Enterprises PH/6X25/500 Pocket Hole Screws 1 Inch Long-Pack of 500 for Hardwoods

#ad
Trend Enterprises #ad - Affordable, high quality fixings ideally suited for use with materials from 05 to 075 inch thick. Made from case hardened steel for assured, consistent performance every time in all materials.

Fine, and hardwoods including oak, self cutting thread for use in harder sheet materials such as birch plywood, cherry, maple and walnut. Small parallel head with square shoulder to the engage the bottom of the pocket hole for maximum tightening torque ensuring solid, consistent joints. No2 robertson square drive head for controlled driving without any cam-out or screwdriver slippage issues, increasing speed of construction and productivity. Screws are zinc plated for durability and longevity, minimising any rust issues if moisture is encountered.
BrandTrend Enterprises #ad
ManufacturerTrend #ad
Height1.89 Inches
Length8.58 Inches
Width5.35 Inches
Part NumberPH/6X25/500
ModelPH/6X25/500

9. KREG

#ad

Pan-Head 1200 Count, 1" #7 Coarse-Thread, KREG SPS-C1-1200 Pocket Screws, zinc

#ad
KREG #ad - Case-hardened steel won’t bend, snap, or break. Pan-head screws for use with Kreg Micro-Pocket pocket holes. Flat-bottom head and smooth shank draw the pocket-hole joint together tightly. Coarse threads for softwoods, MDF, such as pine; and for plywood, particleboard. Square-drive head and self-tapping tip for easy driving without bit slipping, wood splitting.
BrandKREG #ad
ManufacturerKreg Enterprises, Inc. #ad
Height3.6 Inches
Length9 Inches
Weight5 Pounds
Width6.1 Inches
Part NumberSPS-C1-1200
ModelSPS-C1-1200