As an Amazon Associate I earn from qualifying purchases.
1. Taytools #ad
Taytools 467351 Pen Turning Lathe Mandrel Saver Morse Taper MT1 Liver Center #adTaytools #ad
- The pen bushings press against the live center with little to no pressure on the mandrel shaft. Mandrels can easily deflect or bend when the tailstock center point is appropriately tightened into the indentation in the end of the mandrel.
This mandrel saver is a must-have accessory for pen turners. Tailstock mount is #1 MT Morse Taper. This mandrel saver allows the mandrel shaft to extend into or through the hollow end and provides support without putting pressure on the end of the mandrel.
Tightening up the tube and bushing assembly is done by turning your tailstock quill adjustment wheel. This mandrel saver eliminates damage to mandrels and out of round pen blanks. Will work with almost any mandrel with a shaft diameter of. 245 inches of or smaller.
2. Generic #ad
Koleso Pen Turning Lathe Live Mandrel Saver For Woodworking Morse Taper MT1 Liver Center, MT1 #adGeneric #ad
- Suitable for gardening, potting, nursery, etc. The size is measured by hands, please allow minor error of measurement. 100% brand new, high quality. Easy to use or install. It can be used repeatedly.
3. PSI Woodworking #ad
PSI Woodworking PKM-BL Screw-On Pen Mandrel 1" x 8tpi #adPSI Woodworking #ad
- Compatible with psi Woodworking mandrel savers Pkmsts1 & Pkmsts2. 7mm mandrel shaft. 244" od. Also includes 7 7mm bushings, 1 knurled nut, 1 7mm Brad point drill bit. Replacement shafts XPKM-ELC2. Screw-on pen mandrel pre-threaded to 1" x 8TPI.
4. PSI Woodworking #ad
1 Morse Taper 1MT, PSI Woodworking PKMS1SET Pen Mandrel Saver Package #adPSI Woodworking #ad
- No need for the knurled nut that sometimes gets lost, misplaced, or stripped. Great for turners of all skill levels. Perfect system to avoid bent mandrel shafts and ruining the point on your live center.
System adapts to the length of your project. Includes 7mm drill bit, #1mt mandrel saver tailstock center, 5 7mm bushings, & #1MT basic mandrel.
5. Hurricane Turning Tools #ad
1MT, Hurricane Turning Tools, Pen Mandrel Bundle with Mandrel Saver #adHurricane Turning Tools #ad
- Material: Steel. Set includes a 7 mm pen mandrel, 5 spacer bushings and the Mandrel Saver Tailstock Center. Headstock mount: #1 MT Morse Taper.
6. VINWOX #ad
Finisher, Detailer, VINWOX 20” Full Size 4 PCS Carbide Wood Lathe Turning Tool Set, Peach Square Radius, Including Rougher #adVINWOX #ad
- It is ideal for wood turners of all skill levels and helps ensure success right from the start. Top quality and Long cutting life Guaranteed. Start your easy wood turning on your Wood Lathe with VINWOX Carbide Turning tools now.
Blade images on product picture are only for Clear Vision. 1/2/3/4 indexed carbide tip design always offer sharpest edge for turning and maximum cutting life. 10mm straight Square Steel Shank. Including one set replaceable carbide tip insert installed on chisel.
Detailer: 28x10mm Diamond shape Carbide Tip. Rougher: 11. 1x11. 1x1. 75mm 4 sided square shape carbide tip. Peach square Radius: 11. 3x11. 3x1. 75mm with 4 sided 2" Arc Square Radius Carbide Tip. The vinwox carbide turning tools are designed with ease of use in mind. The vinwox carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.
7. Taytools #ad
Overall Length 9 Inches, Handles Blanks Up to 5 Inches, Taytools 465517 Pen Turning Lathe Mandrel Morse Taper MT1 Quick Adjust #adTaytools #ad
- Features a true fitting #1 Morse Taper, which promotes a secure fit to the headstock of the lathe. Inset your blank and tighten the brass knurled nut on the threaded end with finger pressure. Mandrel is.
245" in diameter and will handle blanks up to 5” in length. The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes. Simple slide the brass compression fitting where you want it and tighten. Overall length is 9”. The threaded end works with a live center.
8. TIPU #ad
Tipu Pen Blank Center Finder w/Scale #adTIPU #ad
- Machined to exacting tolerances. Rigid right angled registration surface. Works on round or rectangular blanks up to 1-1/4" in thickness or diameter. One-handed operation.
9. Hurricane Turning Tools #ad
2MT, Pen Mandrel Bundle with Mandrel Saver, Hurricane Turning Tools #adHurricane Turning Tools #ad
- Set includes a 7 mm pen mandrel, 5 spacer bushings and the Mandrel Saver Tailstock Center. Headstock mount: #2 MT Morse Taper. Material: Steel.