Top 9 JET Lathe Chuck – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Jet


5 Sets of Jaws, JET Lathe Chuck Set 1"x8TPI

Jet #ad - Packed securely in a hard plastic JET case with EVA foam. Fits jet lathe models jwl-1015, jwl1221, jwl1440 and other models with a 1"x 8 TPI spindle thread. Includes 5 sets of interchangeable jaws with self centering chuck for varying tasks. Stainless steel T-Handle adjusts jaws concentrically. Chuck is nickel plated to deter rust.
BrandJet #ad
ManufacturerJPW Industries #ad
Part Number719900
Warranty90 Days

2. PSI Woodworking


PSI Woodworking Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor 1/2" 2MT

PSI Woodworking #ad - Great for holding drill bits, dowels, pen mandrel shafts, small turnings, and much more. Includes the 1/2" drill chuck, #2 Morse Taper Arbor, and Jaw Tightening Key. This 3-jaw chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories. The #2mt arbor accepts 1/4" x 20tpi draw bolt; Draw bolt not included. Removes easily with knock out bar.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberTM32
Warranty2 years under normal use.

3. PSI Woodworking


PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking #ad - This is a c-series chuck; compatible with all additional c-series jaws and accessories: 7-3/4" jumbo flat jaws cjawfj2, 8-1/4" Super Finishing Jaws CJAWXL, Pen Blank Drilling Jaws CJAWPEN, 5" small Flat Jaws CJAWFJ1, Set of 2 Alligator Jaws LCALJAWS, and more!.

1 step jaws: 3/32" to 1-3/8" & 11/16" to 2-3/8"; #2 round jaws: 7/8" to 1-1/2" &1-1/4" to 2"; #3 wide bowl jaws: 3-1/16" To 4-3/8"; pin jaws: 1" To 2-1/4". 5" diameter and weighs 2. 60 lbs. Pre-threaded to 1" x 8tpi and includes 3/4" X 16TPI spindle adapter. Barracuda2 chuck body is 3. With the variety of included jaws, the csc3000C will mount most turning projects onto your Lathe; including bowls, other small turning projects, spindles, pens, and much more. Includes: 1 barracuda2 chuck body, 1 spindle adapter, 8 screws, 4 self-centering jaw sets, 1 gear key, 1 woodworm screw chuck, 1 allen wrench, 1 storage case.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height5.25 Inches
Length10.2 Inches
Weight8.6 Pounds
Width5 Inches
Part NumberCSC3000C
Warranty2 Years Under Normal Use

4. WEN


WEN LA4374 3.75-Inch 4-Jaw Self-Centering Lathe Chuck Set with 1-Inch x 8TPI Thread

WEN #ad - Keyed tightening mechanism provides additional grip strength to the workpiece. Features a 1” x 8 tpi thread for compatibility with the majority of wood lathes on the market. External jaws spread inside of workpieces with pilot holes ranging from 1-3/4 to 3-1/8 inches. Internal jaws tighten around workpieces varying from 1-1/4 to 2-1/2 inches in size. Scroll chuck perfect for holding bowls, spindles, and other unwieldy lathe projects.
BrandWEN #ad
ManufacturerWEN #ad
Part NumberLA4374

5. findmall


New 5'' Lathe Chuck K11-130 130mm 3 Jaw Self Centering Cast Iron CNC Machine

findmall #ad - Durable in use - both side of jaw teeth and guides are ground and hardened to HRC 58-62. Diameter: 130 mm 5. 1". All guideways and bearing surfaces are precisely machined.

Internal clamping range: 3-40 mm 012"-1. 58". Applicable range - the chuck is suitable for machine tools and accessories for general lathes, grinding machines, economical CNC lathes, milling machines, drilling and machine accessories, . Jamming range: 40-130 mm 1. 58"-5. 12". Main parameter - 3 jaw self-centering design lathe chuck. 2 sets of jaws - internal and external jaw sets included. Quality material - cast iron chuck body. External clamping range: 40-120 mm 1. 58"-4. 7".
Brandfindmall #ad
Manufacturerfindmall #ad
Part NumberDoes Not Apply

6. PSI Woodworking


PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

PSI Woodworking #ad - Includes #1 step jaws 3/32" to 1-7/8" external & 11/32" to 3-3/8" internal; includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter. Includes screw chuck, allen wrench, and a set of tightening levers. This "c-series" chuck is compatible with all "C-Series" jaws and accessories.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height4 Inches
Length4 Inches
Weight4.95 Pounds
Width2 Inches
Part NumberCUG3418CC
Warranty2 Years Under Normal Use

7. OrangeA


Internal External Grinding for Lathe Drilling Milling Machine, OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel

OrangeA #ad - Fast clamping speed: the 3 jaw lathe chuck has an automatic centering function, which is simple, fast, so it does not need to be repeatedly calibrated during installation. Quality material: the lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62.

It only needs to be installed in the correct order, and convenient. It has high strength and toughness, compression resistance and durability, and long service life. High precision: the wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0002" / 005 mm, and no adjustment is required after installation. The clamping range of this chuck is between 024" / 6 mm - 9. 84" / 250 mm, which is suitable for clamping a variety of industrial parts.

This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation. High adaptability: the accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. Double jaw chuck jaws: internal jaw is a positive l-shape, and external jaw is an inverted L-shape.
BrandOrangeA #ad
ManufacturerOrangeA #ad
Part NumberKPK11-250KPFLZ001V0
ModelK11-250 Lathe Chuck 10 Inch 3 Jaw

8. Tenfer


Self Centering 4 Jaw Wood Turning Chuck, 4 Inch Wood Lathe Chuck Set 1" x 8 tpi

Tenfer #ad - This set contain 3 frequently used types of jaws so they can handle various shaped blocks. Compatible with lathe that use 1”x 8 tpi thread.

This set is easy to install and use. The jaw tightening key allow you to conveniently operate the gripping. Considerate black tool box for you to store these tools. The jaws in this bundle tightly grips from the pens of 1/5” to bowls of 4”, and they can expand to hold the inside of large bowls if you are experienced with turning works thats larger than jaws. Full steel chuck body, nickel plating is stainless and wear-resistant, jaws are quenched and hardened, ensuring long service life. And it's easy to carry.
BrandTenfer #ad
ManufacturerTenfer #ad
Part NumberLatheChuck4in4pc1x8

9. Aogbra


Aogbra 3.75-Inch 4-Jaw Wood Turning Lathe Nickel Plated Chuck and Laser Etched Jaw Set with T Bar Wrench and 6 Point Star Fasteners 1 Inch x 8TPI Thread

Aogbra #ad - Wide application this chuck set has numerous applications for your shop: General Lathe Use, Grinding, Drilling, Woodworking, Milling, and much more!. The self-centering jaws provide superior gripping force, allowing for turning workpieces in a variety of different shapes and sizes.

Complete accessory set this complete lathe chuck set includes the Aogbra chuck, 5 jaw sets and necessary installation tools, and a woodworm screw to provide ultimate flexibility to your projects. Premium quality the chuck body and bearings are made of high-quality, high-performance steel that is precisely machined to industry standards. High-performance jaws multiple jaw sets provide great flexibility to the Aogbra chuck. Precision polished coating premium nickel plating and solid construction greatly reduce rust and maintenance, providing a smooth, accurate and beautiful addition to your lathe.
BrandAogbra #ad
ManufacturerAogbra #ad
Part Number5PWLC