As an Amazon Associate I earn from qualifying purchases.

Product 2: model number: 2100006. Product 2: replacement blade for 9" laminate floor cutter. Product 1: angle gauge allows for cuts up to 45 degrees. Product 1: bonus installation kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm 5/8".

They can cut tougher material with far less hand strain than manual scissors. Do it with worx. Do it better. Comes with charger the battery is internal, so you just connect the included charger when you need to top it up.
Stronger, better scissors so what is the zip snip. They’re cordless Electric Scissors. Battery indicator power level monitor on the Zip Snip lets you make sure that you’ll have enough charge for the job at hand. Blade stays sharp the automatic sharpening system ensures you’ll always have a clean, on cloth, smooth cut, carpet, leather and more. Only 1 lbs not only can you work a long time without fatigue, but the Zip Snip is easy to maneuver.


Installation kit: tapping block, dust free operation, pull bar and double-sided honing stone. Ships to the US only. Professional level. Angle gauge allows for cuts up to 45 degrees. Will also cut vinyl tile and fiber cement siding such as hardy plank.

No dust, save time. 2. 2mm thick tungsten steel sharp blade, included a 600 grit oilstone to keep sharp.
Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts. Cutting unapproved materials will void warranty. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Straight cut, angle cut; " l & 凵" cut and lengthwise cutSolve the installation of wall and corner. Clearly marked measuring guide.

You need to know that this can only cut vinyl plank, WPC, Easy and Professional cutting vinyl floor, No electricity needed, VCT, No noise, Save time.2. 2mm thick 9” length tungsten steel sharp blade, included a 600 grit oilstone to keep sharp.
Clearly marked measuide. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Must repair the sharpness of the blade did flooring on about 2000 square feet, Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade.

The ergonomic design hugs your knee for a superior fit. The flexible neoprene straps lock your pads in place. Forget sweaty knees: the 600d polyester mesh breathes for all-day comfort.
Built tough to withstand heavy use. Forget about slipping, sliding knee pads. Premium protection designed for your comfort and safety. The heavy-duty thick poly shield protects against cuts or scrapes on any terrain. The soft gel core and durable eva foam padding cushion even the more sensitive knees. No return required.

Making any job ideal for one-Person Installation, And 50% Percent Faster.
Made from durable plastic, the locking grip is made from A Rubber Material, Ensuring That The Front Face Of Your Siding Will Not Be Scratched Or Damaged. Designed to hold the board at the correct height, These Hands-Free Clips Help Install Fiber Cement Siding With Less Fatigue And More Productivity.
1. EAB Tool
#ad
EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter
#adEAB Tool #ad - Country of origin : China. Bonus installation kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm 5/8". Angle gauge allows for cuts up to 45 degrees.More information #ad
Will also cut vinyl tile and fiber cement siding such as hardy plank. Will also cut fiber cement siding such as hardier plank. Designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm 5/8".Brand | EAB Tool #ad |
Manufacturer | Exchange A Blade #ad |
Height | 3.5 Inches |
Length | 21 Inches |
Weight | 12 Pounds |
Width | 10 Inches |
Part Number | 2100005 |
Model | 2100005 |
Warranty | 100% satisfaction guarantee |
More information #ad
2. EAB Tool
#ad
EAB Tool Exchange-a-Blade 2100005 9-Inch Laminate Flooring Cutter & 2100006 9" Laminate Floor Cutting Replacement Blade Recyclable,
#adEAB Tool #ad - Will also cut vinyl tile and fiber cement siding such as hardy plank. Product 1: designed to cut laminate, vinyl, solid wood and engineered flooring up to 15mm 5/8".Product 2: model number: 2100006. Product 2: replacement blade for 9" laminate floor cutter. Product 1: angle gauge allows for cuts up to 45 degrees. Product 1: bonus installation kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm 5/8".
More information #ad
Product 1: cuts up to 9” wide. Product 2: item package dimension: 14. 0" l x 013" w x 2. 5" h. Product 2: precision cuts with no splintering or chipping. Will also cut fiber cement siding such as hardier plank.Brand | EAB Tool #ad |
More information #ad
3. WORX
#ad
WORX WX081L 4V ZipSnip Cordless Electric Scissors
#adWORX #ad - Worx tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. Safety first both the trigger and the lock-out switch need to be pressed to make the Zip Snip operate, so it’ll only work when you’ve got a firm grasp on things.They can cut tougher material with far less hand strain than manual scissors. Do it with worx. Do it better. Comes with charger the battery is internal, so you just connect the included charger when you need to top it up.
More information #ad
Do it yourself. Holds a charge for months the 4v maxlithium battery gives it the spin it needs to slice through materials, and holds that charge for a long time. Stronger, better scissors so what is the zip snip. They’re cordless Electric Scissors. Battery indicator power level monitor on the Zip Snip lets you make sure that you’ll have enough charge for the job at hand. Blade stays sharp the automatic sharpening system ensures you’ll always have a clean, on cloth, smooth cut, carpet, leather and more. Only 1 lbs not only can you work a long time without fatigue, but the Zip Snip is easy to maneuver.
Brand | WORX #ad |
Manufacturer | Positec USA #ad |
Height | 4.5 Inches |
Length | 9.12 Inches |
Weight | 1.1 Pounds |
Width | 2 Inches |
Part Number | WX081L |
Model | WX081L |
More information #ad
4. Norske
#ad
Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings
#adNorske #ad - Cuts a variety of material, cemplank, fiber cement board hardieplank, Including Laminate Flooring, Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick.More information #ad
Product Type : Tools. Compact and easy to use; produces Clean, Precision Cuts With No Splintering And Smooth Finish. Sturdy high-quality Steel And Aluminum Construction.Brand | Norske #ad |
Manufacturer | Norske Tools Ltd #ad |
Height | 14 Inches |
Length | 25 Inches |
Weight | 13 Pounds |
Width | 18 Inches |
Part Number | NMAP001 |
Model | NMAP001 |
More information #ad
5. EAB Tool
#ad
EAB Tool 2100010 EAB Tool Professional Floor Cutter, Black, 13"
#adEAB Tool #ad - Cuts up to 13" wide. Quiet, wedge spacer, no electricity required. Replaceable blade 2100011 can be re-sharpened with included sharpening stone.Installation kit: tapping block, dust free operation, pull bar and double-sided honing stone. Ships to the US only. Professional level. Angle gauge allows for cuts up to 45 degrees. Will also cut vinyl tile and fiber cement siding such as hardy plank.
More information #ad
Bonus installation kit and double-sided honing stone included! Designed to cut laminate, solid wood and engineered flooring up to 15mm 5/8". Cuts laminate flooring, wood flooring and engineered flooring up to 15 mm 5/8", vinyl tile, pressboard siding and fiber cement siding such as hardier plank.Brand | EAB Tool #ad |
Manufacturer | EAB Tool Inc. #ad |
Height | 5 Inches |
Length | 24 Inches |
Weight | 14.3 Pounds |
Width | 16 Inches |
Part Number | 2100010 |
Model | 2100010 |
Warranty | 1 year warranty |
More information #ad
6. MANTISTOL
#ad
WPC and Rigid Core Vinyl Plank. 15.4 lbs, PVC, SPC, MANTISTOL 13" Pro Vinyl floor cutter LVT-330 for VCT,LVT, LVP
#adMANTISTOL #ad - Must repair the sharpness of the blade installed flooring on about 5000 sq. Ft otherwise it will quickly end the service life,man-made damage is not covered by the warranty. If you received the cutter that cuts less than 8mm thick, No electricity needed, No noise, Easy and Professional cutting vinyl floor, clean the aluminum shavings in the groove, please remove the blade, and then assemble the blade correctly in the center of the blade bar.No dust, save time. 2. 2mm thick tungsten steel sharp blade, included a 600 grit oilstone to keep sharp.
More information #ad
When the blade becomes dull. 0-45° angle cutting, translational cutting, the deep of the throat is 115mm/4. 5inch. Easy to use and to carry around. 13" cutting width and 8mm cutting depth. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts. Cutting unapproved materials will void warranty. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Straight cut, angle cut; " l & 凵" cut and lengthwise cutSolve the installation of wall and corner. Clearly marked measuring guide.
Brand | MANTISTOL #ad |
Manufacturer | CutTool Ltd. #ad |
Height | 5.4 Inches |
Length | 18 Inches |
Weight | 13 Pounds |
Width | 15 Inches |
Part Number | LVT |
More information #ad
7. MANTISTOL
#ad
MantisTol 8.9" (227mm)Pro LVT/VCT/LVP/PVC/WPC/Rigid Core Vinyl Plank Cutter LVP-230.Best Buy!
#adMANTISTOL #ad - 0-45° angle cutting, Cutting max. Depth 8mm. Translational cutting, the deep of the throat is 115mm/4. 5inch. Easy to use and to carry around, you will like it!. Blade cutting width: 227 mm /8. 9 inch; angle cutting: 0° - 45° inch 160mm wide plank; Max. Thickness cutting: 8 mm / 03inch.You need to know that this can only cut vinyl plank, WPC, Easy and Professional cutting vinyl floor, No electricity needed, VCT, No noise, Save time.2. 2mm thick 9” length tungsten steel sharp blade, included a 600 grit oilstone to keep sharp.
More information #ad
When the blade becomes dull. Design for cutting lvp, lvt, not laminate floor or wood floor!!!no dust, pvc, spc, vinyl Plank Flooring. Straight cut, angle cut; " l & 凵" cut and lengthwise cut solve the installation of wall and corner. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts. Clearly marked measuide. Why does the floor you cut crack? because your floor must be rigid core vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Must repair the sharpness of the blade did flooring on about 2000 square feet, Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade.
Brand | MANTISTOL #ad |
Manufacturer | CutTool Ltd. #ad |
Height | 5.4 Inches |
Length | 19 Inches |
Weight | 10.8 Pounds |
Width | 11 Inches |
Part Number | LVT-230 |
Model | LVT-230 |
More information #ad
8. NoCry
#ad
Strong Double Straps and Adjustable Easy-Fix Clips, NoCry Professional Knee Pads with Heavy Duty Foam Padding and Comfortable Gel Cushion
#adNoCry #ad - Adjustable straps for a firm, secure and comfortable fit. Our new rivets took care of the “rivets popping off” problem with the previous model. However, if you have any issues with the rivets, contact us and we’ll immediately send a replacement unit for free.The ergonomic design hugs your knee for a superior fit. The flexible neoprene straps lock your pads in place. Forget sweaty knees: the 600d polyester mesh breathes for all-day comfort.
More information #ad
Made for professional men and women. The quick release slip buckle clips make putting on and taking off your pads fast and easy. And the heavy-weight nylon thread ensures long-lasting durability. Built tough to withstand heavy use. Forget about slipping, sliding knee pads. Premium protection designed for your comfort and safety. The heavy-duty thick poly shield protects against cuts or scrapes on any terrain. The soft gel core and durable eva foam padding cushion even the more sensitive knees. No return required.
Brand | NoCry #ad |
Manufacturer | NoCry #ad |
Height | 9 Inches |
Length | 3.75 Inches |
Weight | 1.19 Pounds |
Width | 7 Inches |
Part Number | NC-PKP-V1B |
Model | NC-PKP-V1B |
Warranty | LIMITED LIFETIME WARRANTY - If you’re not happy with your NoCry product, please contact us within 30 days of receiving it at [email protected] to return it for free for a replacement product or to receive a full refund. Each NoCry non-electric product is warranted to be free of defects in material and workmanship for as long as the consumer owns the product. Warranty does not cover normal wear and tear, environmental factors, accidental damage, or misuse. At NoCry’s discretion, a defective product will be repaired or replaced. This warranty gives you specific legal rights, but may be superseded by any other rights or warranties in effect, which may vary from state to state. If you think you might have a defective product, please contact us at [email protected] to start the (free) procedure to determine whether your product is defective. More info at https://nocry.com/warranty |
More information #ad
9. PacTool
#ad
PacTool SA903 Gecko Gauge, Siding Mounting Kit for Fiber Cement Installation, Compatible with 5/16-Inch Siding
#adPacTool #ad - Lifting tools: works with 5/16-inch james hardie’s including the updated hz5 series with a new “eased” Drip-Edge Profile. This feature ensures Equal Spacing Between Each Board. Siding tools: our gauges can be adjusted at 1/4-inch increments for 4 to 8-inch siding reveals, And The Patented Friction-Cam Mechanism Can Support Full 12-Foot Cement-Board Siding Lengths.Making any job ideal for one-Person Installation, And 50% Percent Faster.
More information #ad
Professional equipment: this product is safe to use on primed or pre-finished siding products. Pro grip clamp: ideal for one-person installation, this siding mounting Block Gauges And Supports The Next Course For Nailing, with more accuracy, With Virtually No Layout Time. Made from durable plastic, the locking grip is made from A Rubber Material, Ensuring That The Front Face Of Your Siding Will Not Be Scratched Or Damaged. Designed to hold the board at the correct height, These Hands-Free Clips Help Install Fiber Cement Siding With Less Fatigue And More Productivity.
Brand | PacTool #ad |
Manufacturer | General Tools & Instruments #ad |
Height | 16 Inches |
Length | 12 Inches |
Weight | 1.3 Pounds |
Width | 12 Inches |
Part Number | SA903 |
Model | SA903 |
More information #ad