As an Amazon Associate I earn from qualifying purchases.
1. Quentacy #ad
Quentacy DC 0/1-10V LED Dimmer Knob Controller Rotary Mini Switch PWM Dimming for Dimmable Interior Lighting Spotlight Grow Lamp LED Driver #adQuentacy #ad
- The dimmer is small and easy to install, switch Size: 32*20*35（mm）, Mounting Hole Diameter : φ7mm. The connected power 0/1-10v interface must have a voltage of 10v for dimming;adjustment range: 1-100% ;The max load connected to the drive is 10V/40mA;Minimum output connect cable size is 1007#20AWG;Maximum output cable length :50M.
Place the driver away from direct heat sources and in well-aired spaces. If the driver is built-in, sufficient ventilation must be ensured.
When connecting the electronis led driver & ballasts & transformers and power dimmers, careful attention should be paid to connecting "+" and "-" as the picture of Wiring Diagram. Red line connects to "dim+", Black line connects to "DIM-". Designed for 0-10v regulating and compatible all 0/1-10V interface dimmable electronic LED Driver & ballasts & transformers and power dimmers.
2. FLILED #ad
Low Voltage Dimmer Switch for 0-10V LED and Fluorescent Fixtures, Multi Gang Installation, White Dimmer, Single-Pole/3-Way Dimmer Switch, 1 PACK #adFLILED #ad
- Single-pole or 3-way. 6-amp max at 120v / 3-amp max at 277V. Ul listed and DLC listed. Works with 0-10v dimmable LED panels lights, high-bays, LED troffer. High- and low-end adjustment dials for optimized dimming.
3. Maxxima #ad
Wall Plate Included, Maxxima Low Voltage 0-10V Slide Dimmer Switch #adMaxxima #ad
- Wall plate and Mounting Screws Included. Works with led, low voltage applications for 0-10V Dimming like Troffer Fixtures and Commercial Downlights.
Ul approved, 1 Year Warranty. 3-way and single pole Compatible - Vertical Slide Control Dimming. 600w max incandescent; 150w max dimmable LED/CFL, 120VAC, 60Hz.
4. Leviton #ad
1200VA, White w/ Color Change Kits Included, Leviton IP710-DLZ IllumaTech Slide Dimmer for LED 0-10V Power Supplies, 120/277 VAC, 10A LED #adLeviton #ad
- Flexible – can be used in a single-pole or 3-way installation with a 3-way switch, sold separately. Innovative – designed for use with LED fixtures using 0-10V power supplies.
Convenient – separate on/off switch with locator light allows you to set and keep preferred dimming level. Advanced – no power pack required for switching. Exceptional – superior quality and dimming performance.
|Warranty||2 Year Limited|
5. Eaton #ad
Eaton Controls DF10P-C1 Decorator 0-10V Dimmer 120/277V with Color Change Kit, Ivory, Almond, White #adEaton #ad
- Frequency Rating - 60 Hz. Preset feature allows user to return to previous light level when turning lights ON. Color change kit-almond, white, ivory.
Can be wired as single-pole or 3-Way. Integrated full-slide control for easy, precise operation. Neutral is not required for installation of device.
6. Maxxima #ad
Wall Plate Included, Maxxima Low Voltage 0-10V Slide Dimmer Rocker Switch #adMaxxima #ad
- Ul approved, 1 Year Warranty. 3-way circuit compatible only 1 dimmer may be used, 2nd switch is ON/OFF only - Horizontal Slide control dimmer. 0-10v dimming - low voltage compatible - commercial dimmer - 600W max Incandescent; 150W max Dimmable LED/CFL, 120VAC, 60Hz.
Wall plate and Mounting Screws Included. Works with led, low voltage lighting application like Troffers - Trim Dial below Cover Plate allows Sensitivity Adjustment upon installation to achieve compatibility with LED Lamps.
7. Lutron #ad
No Neutral Required, Lutron DVSTV-WH Diva 8 Amp 3-Way/Single-Pole 0-10V Dimmer, White #adLutron #ad
- No neutral wire or power pack required. For use in controlling 0 to 10-Volt LED drivers and/or fluorescent ballasts. Can be used in single pole or 3-way applications.
Easily replaces existing switch and installs in as little as 15 minutes no neutral wire required. Coordinating Claro wall plate sold separately. Large paddle switch with a captive linear-slide control for a standard designer-opening wall plate.
8. DD BEST DD222 #ad
DC 0-10V Knob Dimmer Mini Controller Rotary Switch ON/Off PWM Dimming for 0-10V / 1-10V Dimmable LED Drivers Electronic Ballasts Controling Interior Light Grow Lamp #adDD BEST DD222 #ad
- Dimmer adjustment range: 0-100% ; it also has switch ON-OFF ;Accurate scale can effectively prevent reverse connection and make it more convenient to use. 0-10v dimmer is small and practical, etc.
Place the driver away from direct heat sources and in well-aired spaces. If the driver is built-in, it can be used with downlight, plant light, track light, wall washer light, sufficient ventilation must be ensured.0
0-10v dimmer is only need to be connected the 0-10V / 1-10V Dimmable LED Driver or Dimmable electronic ballast. Easy to wiring : brown line connecting "+", blue line connecting "-";Compatible with various 0/1-10V dimming signal drivers ;DO NOT connect it with AC power directly. Dimmer size : 36*23*36mmincluding knob height; Wire length:35CM ;Brown line is "+", Blue line is "-".
9. Leviton #ad
White w/ Color Change Kits Included, 1200VA, Leviton IP710-LFZ IllumaTech Slide Dimmer for LED 0-10V Power Supplies, 120/277 VAC, 10A LED #adLeviton #ad
- Exceptional – superior quality and dimming performance. Innovative – designed for use with LED fixtures using 0-10V power supplies. Flexible – can be used in a single-pole or 3-way installation with a 3-way switch, sold separately.
Convenient – separate on/off switch allows you to set and keep preferred dimming level. Advanced – no power pack required for switching.