As an Amazon Associate I earn from qualifying purchases.
2. 25" alligator clips have 030" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips. Meets international electrotechnical commission iec safety standard 61010 and is certified for category III installations up to 1, 000V alligator clips are certified for category II installations up to 300V.
Amprobe #ad - Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform. Meets international electrotechnical commission IEC safety standard 61010 and is certified for Category IV installations up to 1, 000V.
Display 3-1/2 digit lcd, 1999 counts, with annunciators. Resistance ranges 200 Ω, 2 kΩ, 2 mΩ, 200 kΩ, 20 kΩ, 20 MΩ. Digital multimeter measures alternating current ac and direct current DC to 2 amp, 000 volts V, AC voltage to 1, DC voltage to 1, 500V, and resistance to 20 megaohms.
Magne-grip holster, frees both hands for work. Comes with one set of high-voltage test leads and two threaded alligator clips for connecting to high-voltage conductors. Includes high voltage test leads with threaded alligator clips. Meets en 61010-1 cat iv 1000 v 1500 v dc max class ii, en 60529:IP67.
Insulation resistance meter to test insulation of wires, transformers, cables, and electrical motors. Tests insulation of wires, cables, transformers and electrical motors.
The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes. Comes with a set of detachable test leads with test probe tips and two alligator clips for a more secure, hands-free connection than probe tips.
Diode and transistor test checks for proper functioning of the circuit's diodes and transistors, including microwave diodes. Zero-adjust pots help eliminate stray capacitance, resistance, and inductance for more accurate readings. Audible continuity buzzer confirms that a circuit is capable of conducting current.
Amprobe #ad - Temperature, duty cycle. Ac/dc voltage up to 1000V, ac/dc current. Low z - to detect stray voltages. Resistance, frequency, capacitance. True rMS.
Amprobe #ad - Meets international electrotechnical Commission IEC safety standard 61010 and is certified for category III installations up to 600V. Pollution degree : 2. Digital clamp meter measures alternating current ac to 600 amp, 000 microfarads, capacitance to 3, resistance to 40 megaohms, direct current DC voltage and AC voltage to 600 volts V, and frequency to 100 kilohertz.
Average-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
Rubber over-molded case. Meets en61010-2-032, iec61010-1 2nd ed. En61010-1 2nd ed. Ul61010b-2-032, ul61010-1 2nd ed. Capacitance to 3000 uF. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings. Hold and maximum reading functions.
WGGE #ad - Test lead set connects a compatible electrical test meter to a device for testing. Threaded alligator clip: 8-32 threaded barrel connection, Rating: 10 Amps Threaded alligator clip dimensions 65mm x 20mm x 20mm. International electrotechnical commission iec certified for category iii installations up to 1, 000V.
The test lead wire - 40 inches, shrouded 4mm banana plugs- ends test lead We use high-quality materials ensures that the test leads are durable, test lead length- 47inches, flexible, and resistant to freezing and heat.
Test lead x2, two different colors black, threaded alligator clips x2, Threaded Safety alligator clip x2, red. High quality 12 months manufacturer warranty and 24/7 hours WGGE customer service. Two pvc insulation lead wires with two threaded probe tips, two threaded alligator clips and two safety alligator clips.
1. Amprobe
#adAmprobe DL243D Essential Test Lead Kit
#adAmprobe #ad - Kit includes two 48” lead wires, two standard probe tips, two alligator clips, and two spade lugs for connecting to a variety of conductors. Test lead kit connects a compatible electrical test meter to a device for testing.2. 25" alligator clips have 030" jaw opening and teeth that grip the conductor to provide a more secure, hands-free connection than probe tips. Meets international electrotechnical commission iec safety standard 61010 and is certified for category III installations up to 1, 000V alligator clips are certified for category II installations up to 300V.
More information #ad
Silicone insulation on lead wires protects hands from shock and heat, resists melting or becoming brittle in hot or cold environments, and maintains flexibility better than PVC insulation.| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.45 Pounds |
| Width | 1 Inches |
| Part Number | 3026853 |
| Model | DL243D |
More information #ad
2. Amprobe
#adAmprobe HD110C IP67 Heavy Duty Multimeter
#adDisplay 3-1/2 digit lcd, 1999 counts, with annunciators. Resistance ranges 200 Ω, 2 kΩ, 2 mΩ, 200 kΩ, 20 kΩ, 20 MΩ. Digital multimeter measures alternating current ac and direct current DC to 2 amp, 000 volts V, AC voltage to 1, DC voltage to 1, 500V, and resistance to 20 megaohms.
More information #ad
Molded plastic case helps protect meter from fire, chemicals, impacts, and abrasions, grease, falls, and is sealed to prevent water and dirt from entering the case. Magne-grip holster, frees both hands for work. Comes with one set of high-voltage test leads and two threaded alligator clips for connecting to high-voltage conductors. Includes high voltage test leads with threaded alligator clips. Meets en 61010-1 cat iv 1000 v 1500 v dc max class ii, en 60529:IP67.
| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 7.87 Inches |
| Length | 2.32 Inches |
| Weight | 2.36 Pounds |
| Width | 4.02 Inches |
| Part Number | 2670779 |
| Model | HD110C |
| Warranty | One Year Limited Warranty |
More information #ad
3. Amprobe
#adAmprobe 37XR-A True RMS Digital Multimeter with Component Logic Test
#adAmprobe #ad - 10, 000 count, 01% accuracy. Input warning tone when Test Leads Are In Wrong Jack. 1000v/750v dc/ac true rMS. 10 amps ac/dc, fully safety fused -- Resistance To 40Mohm. Inductance to 40 h, capacitance to 400 microF, Frequency To 40 MHz, Logic To 20 MHz.More information #ad
| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 0.91 Inches |
| Length | 5.2 Inches |
| Weight | 1.72 Pounds |
| Width | 1.1 Inches |
| Part Number | 2727808 |
| Model | 37XR-A |
| Warranty | Three Year Warranty |
More information #ad
4. Amprobe
#adAmprobe AMB-25 Digital Insulation Resistance Tester
#adAmprobe #ad - Sensitive ohmmeter for checking resistance of motor windings. Measures insulation resistance from 0 to 1, and 1, 000 megaohms with 250, 500, 000V DC test voltage.Insulation resistance meter to test insulation of wires, transformers, cables, and electrical motors. Tests insulation of wires, cables, transformers and electrical motors.
More information #ad
Digital meter with automatic range selection. Internal memory stores up to 9 test results. Selectable test voltages 250V, 500V and 1000V. Safety rated to european standard EN 61010-1 Category III 1, 000V. Programmable timer to perform the dielectric absorption ratio test.| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Weight | 2.04 Pounds |
| Part Number | 2730991 |
| Model | AMB-25 |
More information #ad
5. Amprobe
#ad3026976 LCR55A Inductance, Capacitance, and Resistance Tester, Amprobe
#adAmprobe #ad - Data hold, max hold, "zero adjust" pot for Ohms, Low battery indication, Auto-power off. Tests capacitance, resistance, and inductance, and checks transistors and diodes to verify functionality and compatibility of electrical circuits and devices.The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes. Comes with a set of detachable test leads with test probe tips and two alligator clips for a more secure, hands-free connection than probe tips.
More information #ad
Oversized, digital display. Plug-in test slots and test leads with threaded alligator clips. Diode and transistor test checks for proper functioning of the circuit's diodes and transistors, including microwave diodes. Zero-adjust pots help eliminate stray capacitance, resistance, and inductance for more accurate readings. Audible continuity buzzer confirms that a circuit is capable of conducting current.
| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Weight | 0.66 Pounds |
| Width | 1 Inches |
| Part Number | 3026976 |
| Model | LCR55A |
More information #ad
6. Amprobe
#adAmprobe AM-570 Industrial Digital Multimeter with True-RMS
#adMore information #ad
| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 2 Inches |
| Length | 4 Inches |
| Weight | 1.9 Pounds |
| Width | 10 Inches |
| Part Number | AM-570 |
| Model | AM-570 |
More information #ad
7. Amprobe
#adAmprobe-3037808 ACD-10 PLUS 600A Clamp Multimeter
#adAverage-sensing meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.
More information #ad
Cat iii-600 volts ac & dc. Transformer clamp with 1" 26 mm jaw opening has jaws that are slimmer than standard clamp jaws, for improved access to tight areas, and measures current without touching or interrupting the circuit. Rubber over-molded case. Meets en61010-2-032, iec61010-1 2nd ed. En61010-1 2nd ed. Ul61010b-2-032, ul61010-1 2nd ed. Capacitance to 3000 uF. A relative zero mode stores a reading in memory to use as a zero point for subsequent readings. Hold and maximum reading functions.
| Brand | Amprobe #ad |
| Manufacturer | Amprobe #ad |
| Height | 2.9 Inches |
| Length | 10 Inches |
| Weight | 0.45 Pounds |
| Width | 6 Inches |
| Part Number | 3037808 |
| Model | ACD-10 PLUS |
| Warranty | One year limited |
More information #ad
8. WGGE
#ad4mm Test Lead Probe Tip. WG-011, WGGE WG-011 Test Lead and Safety Alligator Clips,Multimeter Test Leads Kit CAT III 1000V & CAT IV 600V with Threaded Alligator Clips
#adThe test lead wire - 40 inches, shrouded 4mm banana plugs- ends test lead We use high-quality materials ensures that the test leads are durable, test lead length- 47inches, flexible, and resistant to freezing and heat.
More information #ad
Safety alligator clips' jaw opening is 05'', material: nickel-plated steel, jaw open 031” 7. 9mm max, material: nickel-plated brass clip, glass-filled nylon housing Safety alligator clip dimensions 49mm x 10mm x 7mm. Test lead x2, two different colors black, threaded alligator clips x2, Threaded Safety alligator clip x2, red. High quality 12 months manufacturer warranty and 24/7 hours WGGE customer service. Two pvc insulation lead wires with two threaded probe tips, two threaded alligator clips and two safety alligator clips.
| Brand | WGGE #ad |
| Manufacturer | W&G GLOBAL ELECTRONICS INC #ad |
| Height | 0.6 Inches |
| Length | 7 Inches |
| Weight | 0.29 Pounds |
| Width | 3.5 Inches |
| Part Number | WG-011 |
More information #ad
