Top 7 Lathe Tool Rest – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner's 4pc Toolrest Set

#ad
PSI Woodworking #ad - 2-1/2" radius toolrest has 6-1/2" span with 3" post and overall vertical length of 4-1/4"; 2" radius toolrest has 6-3/4" span with 2-1/2" post and overall vertical length of 3-1/2".

Post on all four toolrests is 5/8" diameter 15. 875mm. Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch. S-curve toolrest has 11" span with 3" long post with overall vertical length of 4"; 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4". Reach far into the interior of bowls with ease; Use for bowl exterior, interior hollowing, deep penetration, and sharp corners.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height2.55 Inches
Length12.2 Inches
Weight4.35 Pounds
Width5.35 Inches
Part NumberCLTEZSETC
ModelCLTEZSETC
Warranty2 Years Under Normal Use

2. PSI Woodworking

#ad

1" Diameter Post 25.4mm, PSI Woodworking CLTSET1 3pc Toolrest Set

#ad
PSI Woodworking #ad - 25" x 3/16" bar, and 1 8" arc with 1-1/4" x 3/8" Bar. Heavy duty 3pc tool rest set that enables you to position your chisel close to your work-piece to eliminate vibration while turning. Great for turning a bowl; inside hollowing and exterior wood removal. Post on all three tool rests is 1" Diameter 25. Check the your lathe's tool rest holder for compatibility; 1" = 25. 4mm and 5-3/4" Long. Includes 1 12" straight with 3/4" diameter bar, 1 5" arc with 1. 4mm; 984252" = 25mm.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberCLTSET1
ModelCLTSET1
Warranty2 Years Under Normal Use

3. MAYAGU

#ad

11.8 Inch Cast Iron Lathe Tool Rest For Wood Turning Lathe Turning Tool Rest

#ad
MAYAGU #ad - Made of cast iron, rod Will Not Nick Or Scratch Giving. Material:Cast Iron. Wear-resistant, high hardness, anti-rust, Has A Long Service Life. The shank diameter Is 16MM. Tool rest is suitable for 16MM Diameter Tool Rest Base.
BrandMAYAGU #ad
ManufacturerMAYAGU #ad
Part Number16100849b

4. Robust

#ad

Robust Low Profile Tool Rest, 12" Wide, Standard Post

#ad
Robust #ad - Low profile rest - 12" wide - 1" Diameter - Standard Post. Sold as tool rest only, lathe banjo not included. Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Robust tool rest are made from solid steel. Fits robust sweet 16, 3000 | delta 16 | general 16 |stubby 750, independence, 2016 | nova dvr, liberty | oneway 2036, 1000 | Woodfast 16 Lathes.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Width12 Inches
Part NumberRTR-012-LP-SD

5. Robust

#ad

Robust 9" Small"J" Curved Tool Rest, Long Post

#ad
Robust #ad - Small "j" curved rest - 9" wide - 1" Diameter - Long Post. Robust tool rest are made from solid steel. Sold as tool rest only, lathe banjo not included. Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Fits oneway 2436, 3520b, 3520a, 2416 | powermatic 3520c, 4224 | Robust AB25 | General 20" Lathes.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Width9 Inches
Part NumberRTR-09-SJ-LO

6. Robust

#ad

Robust Tool Rest for Mini Lathes, 12" Wide, 5/8" Post

#ad
Robust #ad - Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Sold as tool rest only, lathe banjo not included. Tool rest for mini lathes - 12" Wide - 5/8" Post. Robust tool rest are made from solid steel. Fits midi and mini Lathes with 5/8" posts.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Weight3 Pounds
Width12 Inches
Part NumberRTR-12-MN-SD

7. Nova

#ad

NOVA 71007 Tool Rest 4" Length

#ad
Nova #ad - Ribbed design for maximum rigidity. Solid cast iron. Solid 1″ shank for a super strong turning platform.
BrandNova #ad
ManufacturerTeknatool #ad
Height7 Inches
Length6.8 Inches
Weight2.1 Pounds
Width2.4 Inches
Part Number71007
Model71007