Top 7 Fluke Network Cable Tester – Network & Cable Testers

As an Amazon Associate I earn from qualifying purchases.

1. Klein Tools

#ad

Klein Tools VDV526-052 Cable Tester, LAN Scout Jr. Network Tester / Continuity Tester for RJ45 Data Cable Twisted Pair Connections

#ad
Klein Tools #ad - Dual function button- operates test functions and tone generator. Cable tester tests the continuity of twisted pair data wiring RJ45 connections. Easy to use, compact tool saves time and money on the job. Displays wire map. Large display for easy identification.
BrandKlein Tools #ad
ManufacturerNorth Coast Electric #ad
Height1 Inches
Length4.6 Inches
Weight0.26 Pounds
Width2.2 Inches
Part NumberVDV526-052
ModelVDV526-052
WarrantyKlein Tools electronic test and measurement devices (and accessories), manufactured and sold for commercial or industrial uses, are warranted to be free from defects in materials and workmanship for two years from the date of purchase (unless otherwise noted on the product packaging)

2. Fluke Networks

#ad

Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology

#ad
Fluke Networks #ad - Push button switch selects Solid, Alt and Off. Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3. 5 millimeter headphone jack. Precise smarttone technology provides five distinct tones for exact pair identification, replaceable tip. Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline. Sends a loud tone up to 16 kilometer 10 miles in most cables and provides 5 distinct cadences for isolating individual wire pairs.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Height3 Inches
Length12.25 Inches
Weight1.1 Pounds
Width7 Inches
Part Number26000900
Model26000900

3. Fluke Networks

#ad

Fluke Networks PTNX1 Pocket Toner NX1 Coax Cable Tester

#ad
Fluke Networks #ad - Pocket-sized toner identifies and tests singular coaxial cable that has F-type connectors to detect continuity, short circuits, and open circuits. Tests live cabling and is protected up to 52V. Removable coupler on the tone generator cap allows for testing male and female connectors. Dual-colored led display shows green for continuity, red for shorts, and remains clear for opens. Buzzers in both the probe and detachable tone generator indicate continuity.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Part NumberPTNX1
ModelPTNX1

4. Fluke Networks

#ad

Fluke Networks 11290000 Electrical Contractor Telecom Kit I with TS30 Telephone Test Set

#ad
Fluke Networks #ad - Use the probe pic to check for loose or damaged connections. Cut and strip wire cleaner and faster with the Electricians D Snips. Connect to jacks for testing with the standard 4 wire modular adapter. Cable stripper quickly rings and slits many types of cable. D814 industry standard punch down tool for reliable terminations and an EverSharp 66/110 cut blade provides flexibility for different block and jack terminations.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Height0.39 Inches
Length0.39 Inches
Weight3.7 Pounds
Width0.39 Inches
Part Number11290000
Model11290000
WarrantyLimited manufacturer warranty

5. Fluke Networks

#ad

Fluke Networks MMC-62-SCST Multimode Launch/Tail Cable, for Testing 62.5 µm ST Connections

#ad
Fluke Networks #ad - One sc/st 62. 5 micron Multimode cable for launch and tail. 105m ± 3m cable. Suggested use with the PA-SC. Compatable with the fluke Networks Multimode 62. 5 micron optifiber Pro and Fiber QuickMap. For testing ST connections.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Height0.39 Inches
Length0.39 Inches
Weight1.1 Pounds
Width0.39 Inches
Part NumberMMC-62-SCST
ModelMMC-62-SCST

6. Fluke Networks

#ad

Fluke Networks CIQ-GSV2 CableIQ Network Cable Tester. Service Kit with Tone Generator and Network Tester

#ad
Fluke Networks #ad - Confirm link speed/duplex/pairs and ping key network devices at Gigabit speeds. Locate and trace cables with IntelliTone digital signaling technology. Quickly qualify bandwidth 10/100, VoIP, Gigabit Ethernet of any cable. Linkrunner at 1000 meter performs 10/100/1g copper verification testing and power-over-Ethernet PoE testing up to 802.

3at 25. 5w. Measure ieee 802. 3af power over Ethernet PoE voltage pair by pair. Includes the cableiq qualification tester, six cableIQ remote identifiers, IntelliTone Pro 200 probe, LinkRunner AT 1000 verification tester, software, and carrying case. Cableiq qualification tester qualifies network support for voice, including twisted-pair, and CATV on copper cabling, VoIP, 10/100/1000 Ethernet, coax, and audio cabling. Troubleshoot cabling performance faults like crosstalk or impedance changes.

Pinpoint switch ports with Cisco, Extreme, and Link Layer Discovery Protocols. Save cable and network test reports to PC with included reporting software. Qualification tester kit with cableiq qualification tester and additional devices, 10/100, VoIP, qualifies existing cabling for support of voice, and gigabit Ethernet services. Intellitone pro 200 probe detects intellitone digital signals and 500 to 1, trace, 200 Hz analog signals to locate, and isolate copper cabling.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Height1.77 Inches
Length3.5 Inches
Weight11.75 Pounds
Width7.01 Inches
Part NumberCIQ-GSV2
ModelCIQ-GSV

7. Fluke Networks

#ad

Fluke Networks SFSINGLEMODESOURCE SimpliFiber Pro Singlemode 1310/1550 Laser Light Source

#ad
Fluke Networks #ad - Textured, impact-resistant covers and a compact, ergonomic shape for a comfortable and secure grip. Device type: Laser Optical light source.

Includes FindFiber source capability. Fixed sc port with st and LC testing capability available using hybrid test-reference cord accessories purchased separately. Simplifiber pro singlemode 1310/1550 laser light source. It's a dual wavelength 1310/1550 source and incorporates a 1310 nm Laser and a 1550 nm Laser, ideal for singlemode fiber testing. Engineered to work together with the SimpliFiber Pro optical power meter, the singlemode light source is included in various fiber verification kits. Connectors: SC.
BrandFluke Networks #ad
ManufacturerFluke Networks #ad
Height5.75 Inches
Length12.25 Inches
Weight2 Pounds
Width10.25 Inches
Part NumberSFSINGLEMODESOURCE
ModelSFSINGLEMODESOURCE