As an Amazon Associate I earn from qualifying purchases.
Captain O-Ring #ad - Alternate part Numbers: iSpring ORBX2. O-ring is approximately 5-1/2" inside diameter x 5-7/8" outside Diameter. Material: Buna-N nitrile butadiene rubber. Replacement o-ring for culligan wh-hd200-c, 3m 3wh-hd-s01, and other housings that call for part number OR-250 or ORBX2.
Culligan #ad - Fits models culligan: hf-150 a, hf-360a - 45025, hf-160, 46764 And 49560. Fits culligan and Ace Whole House Water Filtration Systems. Replace every third Filter Change, For Best Results. Genuine OEM Product. Helps prevent Leakage If Replaced Consistently.
Culligan #ad - Compatible with culligan filter cartridges: r50-bbsa, CW5-BBS, CW25-BBS, cP5-BBS, RFC-BBSA. The wh-hd200-c housing has been tested and certified by wqa against nsf/ansI 372 for low lead compliance, CSA B483.
1 and nsf/ansi 42 for material safety and structural integrity requirements only. Reduces: sediment, rust, sand, odor, coarse sand, fine sand, bad taste, scale, dirt, silt, aesthetic chlorine taste and odor depending on filter cartridge.
5" diameter housing sump. The or-38 oring can be used with 3/8" inlet/outlet housings with a 3. 5" diameter housing sump. Water filters model #US-600A. 3/8" housing O Ring. Used for undersink Water Filters.
The or-38 o-ring is a lubricated rubber gasket for many brands of under sink and whole house water filtration housings. 3/8" housing o ring, used for undersink Water Filters Model #US-600A. The or-38 o-ring has been branded under ace Hardware, American Plumber, Pentek, Culligan, Ametek, US Filter Plymouth Products. The or-38 oring should be replaced every two filter changes or if there is damage to the OR-38 oring.
1. Captain O-Ring
#adCaptain O-Ring, Culligan Compatible OR-250 OR250 Replacement Filter Housing O-Ring Buna-N ORing 3 Pack Compatible with WH-HD200-C, etc
#adMore information #ad
Manufactured and Warrantied by Captain O-Ring LLC. Includes 3 replacement o-rings also called seals or gaskets to repair your leaking water filter housing. Part number: culligan OR-250 3 Pack.| Brand | Captain O-Ring #ad |
| Manufacturer | Captain O-Ring LLC #ad |
| Part Number | OR-250 |
| Model | OR-250 |
More information #ad
2. Culligan
#adCulligan OR-34A/OR-34 Filter Housing O-Ring Set, 1-Pack
#adMore information #ad
| Brand | Culligan #ad |
| Manufacturer | Culligan International #ad |
More information #ad
3. Culligan
#adCulligan WH-HD200-C Whole House Heavy Duty 1" Inlet/Outlet Filtration System
#ad1 and nsf/ansi 42 for material safety and structural integrity requirements only. Reduces: sediment, rust, sand, odor, coarse sand, fine sand, bad taste, scale, dirt, silt, aesthetic chlorine taste and odor depending on filter cartridge.
More information #ad
Whole house water filtration system with 1" stainless steel reinforced inlet/outlet connectors. Includes: wr-hd housing wrench, mounting bracket, filter life monitor and filter monitor battery. Features bypass shut off valve, integrated bracket design and battery operated filter change timer. Perfect for residential homes, helps protect appliances and pluming from sediment and scale.| Brand | Culligan #ad |
| Manufacturer | CULLIGAN #ad |
| Height | 16.33 Inches |
| Length | 7.48 Inches |
| Weight | 3 Pounds |
| Width | 8.26 Inches |
| Part Number | WH-HD200-C |
| Model | WH-HD200-C |
More information #ad
4. Culligan
#adCulligan Samsung Water Filter, White
#adCulligan #ad - Use to replace Samsung da29-00020b. Blocks out sediment, dirt, rust and other properties that decrease taste and could be potentially harmful to yourself and your home.More information #ad
Not recommended for use with untreated well water supplies. Wqa tested and certified for material safety. Simple installation instructions makes changing filters quick and easy.| Brand | Culligan #ad |
| Manufacturer | Culligan #ad |
| Height | 11.75 Inches |
| Length | 2.25 Inches |
| Weight | 0.6 Pounds |
| Width | 2.25 Inches |
| Part Number | 01028526 |
| Model | RF-S2A |
More information #ad
5. Culligan
#adBlue, Small, Culligan OR-38 O-Ring of 3.5-Inch Diameter
#adCulligan #ad - The or-38 o-ring is a lubricated rubber gasket for many brands of under sink and whole house water filtration housings. Used for undersink water Filters Model No. Us-550 Used for undersink water Filters Model No. Us-550 The or-38 oring can be used with 3/8" inlet/outlet housings with a 3.5" diameter housing sump. The or-38 oring can be used with 3/8" inlet/outlet housings with a 3. 5" diameter housing sump. Water filters model #US-600A. 3/8" housing O Ring. Used for undersink Water Filters.
More information #ad
Model #us-600A. The or-38 o-ring has been branded under ace Hardware, American Plumber, Ametek, Pentek, Culligan, US Filter Plymouth Products. The or-38 oring should be replaced every two filter changes or if there is damage to the OR-38 oring. The or-38 o-ring is a lubricated rubber gasket for many brands of under sink and whole house water filtration housings. 3/8" housing o ring, used for undersink Water Filters Model #US-600A. The or-38 o-ring has been branded under ace Hardware, American Plumber, Pentek, Culligan, Ametek, US Filter Plymouth Products. The or-38 oring should be replaced every two filter changes or if there is damage to the OR-38 oring.
| Brand | Culligan #ad |
| Manufacturer | Culligan #ad |
| Height | 1.58 Inches |
| Length | 0.1 Inches |
| Weight | 0.02 Pounds |
| Width | 1.08 Inches |
| Part Number | 01019186 |
| Model | OR-38 |
More information #ad
