As an Amazon Associate I earn from qualifying purchases.
MICRO JIG #ad - Top-down installation for easy And Fast Mounting To Jigs, Fixtures And Sleds. Build table Saw Sleds Fast. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot That Measures Between 073" and 079" wide and at least 5/16" Deep. No slop, side-to-side Play Or Seasonal Warping.
MICROJIG #ad - Top-down installation for easy and fast mounting to jigs, fixtures and sleds. Zeroplay miter bars will fit any standard 3/4” t or u-shaped miter slot that measures between 0 Miter stop not included.
Peachtree Woodworking Supply #ad - Uhmw ultra high molecular weight polymer plastic is a linear polyethylene material with a molecular weight in the range of 3, 000, 000, 000 to 6, 000. The idea behind using uhmw material for making jigs & fixtures is that the material stands up to friction better than wood and lower quality or lower density plastics.
Uhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. Use this uhmw to make jigs and fixtures for your table saw, router table, etc.
Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly. Made in the usa! This makes it ideal for sleds where repetitive sliding happens regularly. We all know how residue left on a table saw can be rather irritating and even harder to remove. Its also very slick in comparison to wood and other plastics.
MICROJIG #ad - Proprietary green GRR-RIP for extreme hold. 90-degree flip guide for vertical footing on band saws and router tables. 90-degree flipguide for vertical footing on bandsaws and router tables.
Ergonomic handle exerts directional pressure against the fence. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Auto-retracting heel technology hooks the tail-end of your board.
INCRA #ad - Special edition 1/10th° Vernier Cursor. Removable t-slot retaining clips & adjustable miter bar. Table size: for adequate support, the miter express requires a minimum of 11" from the side of the blade to either the left or right edges of the saw sled can be installed on either side of the blade.
MICROJIG #ad - Accurate miter stop that locks into the T-Track for precise stop cuts and blind rabbetting. Made in the usa. 100% satisfaction Guaranteed. Make countless of small jigs just for your needs.
INCRA #ad - 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths. 41 laser cut v-stops for extreme accuracy at all popular angles.
MICRO JIG #ad - Made in the usa. Gr-200 features include: 3-directional Force for total control of the workpiece and virtually eliminate kickback. Precise 1/4" thin rips.
Fulton #ad - Make your crosscut sled to the size you want or need for your table saw and your specific cutting needs. Please note, the bars do NOT FIT RYOBI table saw track slots. Each track is cut to length for the perfect sub-fence on the crosscut sled. The stop block will allow you to make repetitive cuts without having to constantly move and measure the fence distance each time you make a cut.
Uhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Some time ago we noticed a lot of companies had uhmw bars available for purchase.
Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process. You may also have had the need to make repetitive cuts of the same length. While we as a woodworking company know exactly what they are used for, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, many novice or non-woodworkers do not. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots.
1. MICRO JIG
#adZEROPLAY Miter Bars by MICROJIG Double Pack
#adMore information #ad
| Brand | MICRO JIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 1 Inches |
| Length | 10 Inches |
| Weight | 0.64 Pounds |
| Width | 1 Inches |
| Part Number | ZP9-B2S2 |
| Model | ZP9-B2S2 |
| Warranty | Extended 3-Year Warranty from Authorized Resellers |
More information #ad
2. MICROJIG
#adMICRO JIG ZEROPLAY Miter Bar
#adMore information #ad
73 and 0 No slop, side-to-side play or seasonal warping. 79" wide and at least 5/16" deep. ". Build table saw sleds fast. Includes 1 miter bar. Made in the usa.| Brand | MICROJIG #ad |
| Manufacturer | MICROJIG #ad |
| Height | 0.75 Inches |
| Length | 6.15 Inches |
| Weight | 0.02 Pounds |
| Width | 11.55 Inches |
| Part Number | ZP9-B1 |
| Model | ZP9-B1 |
| Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
3. MICROJIG
#adZEROPLAY 360 Sled Kit
#adMICROJIG #ad - Zeroplay miter bar’s hassle-free miter bars using One-Touch Calibration. 360 degrees of adjustability. No slop, side-to-side play or seasonal warping. Compatible miter tracks include but not exclusive to: SawStop, Dewalt, Delta Unisaw, Powermatic, Bosch 4100, Rigid, and General 350 Tracks.More information #ad
A true microjIG Innovation. 73" and 079" wide and at least 5/16" deep. Made in the usa. Zeroplay miter bars will fit any standard 3/4” x 3/8” t-track miter slot that measures between 0 Top-down installation for easy and fast mounting to jigs, fixtures and sleds.| Brand | MICROJIG #ad |
| Manufacturer | Micro Jig #ad |
| Height | 19.69 Inches |
| Length | 7.09 Inches |
| Weight | 0.39 Pounds |
| Width | 9.84 Inches |
| Part Number | DV-360ZPB1 |
| Model | DV-360ZPB1 |
| Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
4. Peachtree Woodworking Supply
#adRouter Table and Bandsaws 2 UHMW Bars, Fixtures or Miter Slots size 3/4" x 3/8". Slick Durable Material Slides with Ease. Ideal for Table Saws, UHMW Precision Milled Bar 3/4" X 3/8" X 36" For Jigs
#adUhmw is 10 times heavier than regular high density polyethylene making it extremely durable for constant repetitive use. Use this uhmw to make jigs and fixtures for your table saw, router table, etc.
More information #ad
Even though its "slick", it does not leave behind any residue which means no clean up after use. Even though its "slick", it does NOT leave behind any residue which means no clean up after use. We all know how residue left on a table saw can be rather irritating and even harder to remove. Use the 3/4" x 3/8" plastic strips to make sliding table jigs for your table saw, band saw or router table. Length of bar may vary slightly. Made in the usa! This makes it ideal for sleds where repetitive sliding happens regularly. We all know how residue left on a table saw can be rather irritating and even harder to remove. Its also very slick in comparison to wood and other plastics.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | 1120 |
| Model | 11520 |
More information #ad
5. MICROJIG
#adGRR-RIP BLOCK Smart Hook Pushblock for Router Table, and Band Saws, Jointer
#adErgonomic handle exerts directional pressure against the fence. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Auto-retracting heel technology hooks the tail-end of your board.
More information #ad
A true microjIG Innovation. Optional mounts for Deflector/Connector shield plate for additional protection against chip debris. Proprietary green GRR-RIP for extreme hold. Auto-retracting heel technology hooks the tail-end of your board. Made in the usa. Ergonomic handle exerts directional pressure against the fence.| Brand | MICROJIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 3.5 Inches |
| Length | 9 Inches |
| Weight | 0.14 Pounds |
| Width | 3.5 Inches |
| Part Number | GB-1 |
| Model | GB-1 |
| Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
6. INCRA
#adINCRA Miter Combo Value Pack
#adMore information #ad
Dock & lock the included INCRA Miter Gauge in Seconds. Glidelock miter bar - the miter 1000se's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws with standard miter gauge channels. Special edition telescoping INCRA-LOCK Fence.| Brand | INCRA #ad |
| Manufacturer | Incra #ad |
| Height | 14.5 Inches |
| Length | 21.44 Inches |
| Weight | 6.25 Pounds |
| Width | 26.75 Inches |
| Part Number | ME/1000SE |
| Model | ME/1000SE |
| Warranty | N |
More information #ad
7. MICROJIG
#adAnd Band Saws., ZEROPLAY Miter Stop for T-Slots on Table Saws, Router Tables
#adMore information #ad
Fits standard 3/4" x 3/8" t miter slots, ShopSmith and General miter tracks. 3-year Warranty. Works as an anchor for hold-downs and clamps along the miter slot.| Brand | MICROJIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.11 Pounds |
| Width | 3 Inches |
| Part Number | ZP9-S1 |
| Model | ZP9-S1 |
| Warranty | Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only |
More information #ad
8. INCRA
#adINCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop
#adMore information #ad
Engraved stainless steel primary scale for precision accuracy. Patented glidelock miter bar with 6 expansion points for quick repeats. Incra flip shop stop-Fence Positioner for optimal mitering accuracy.| Brand | INCRA #ad |
| Manufacturer | Incra #ad |
| Height | 4.5 Inches |
| Length | 18.25 Inches |
| Weight | 8.26 Pounds |
| Width | 18.25 Inches |
| Part Number | MITER1000/SE |
| Model | MITER1000SE |
| Warranty | 1 year replacement warranty |
More information #ad
9. MICRO JIG
#adAnd Band Saw by MICROJIG, Jointer, GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table
#adMore information #ad
Stabilizes for cutting bevel rips, resawing, dowels, irregular-shaped stock, dados and more. Moving-blade-guard hand protection. Cutting range table Saws:1/4 to 5 inch. A true microJIG Innovation. :.| Brand | MICRO JIG #ad |
| Manufacturer | MICROJIG, Inc. #ad |
| Height | 4.65 Inches |
| Length | 8 Inches |
| Weight | 2.4 Pounds |
| Width | 5.5 Inches |
| Part Number | GR-200 |
| Model | GR-200 |
| Warranty | Extended 3-Year Warranty from Authorized Resellers |
More information #ad
10. Fulton
#adFulton DIY Table Saw Crosscut Sled Kit with 2 UHMW Bars 2 Aluminum Tracks 1 Knob and 1 Bolt along with Full Color HOW TO BUILD YOUR OWN Crosscut Sled Guide Booklet
#adUhmw bars are most commonly used as runners for crosscut sleds since they don’t produce as much friction as wood does. Some time ago we noticed a lot of companies had uhmw bars available for purchase.
More information #ad
Another advantage is that UHMW won’t expand or contract like wood does during drastic weather changes. We have also included a full color and detailed how to guide book to help you with the crosscut sled building process. The tracks that are included in this kit are made from solid extruded aluminum and are made in the USA. Crosscut sleds help stabilize the work piece and are very accurate since they are essentially calibrated to your saw during the sled building process. You may also have had the need to make repetitive cuts of the same length. While we as a woodworking company know exactly what they are used for, pre-cut aluminum track, a knob and bolt and an easy to understand how to guide booklet so you can create your very own, many novice or non-woodworkers do not. Each bar is approximately 3/4” x 3/8” which fits most standard table saw slots.
| Brand | Fulton #ad |
| Manufacturer | Fulton Woodworking Tools and Accessories #ad |
| Part Number | 11577 |
| Model | 11577 |
More information #ad
