Top 10 Wrench Set Metric and standard – Wrench Sets

As an Amazon Associate I earn from qualifying purchases.



Metric 8mm to 24mm | Perfect for General Household, 24-Piece All-Purpose Master Combination Wrench Set with Roll-up Pouch | SAE 1/4” to 1”, College Dormitory, Boat and Much More, Car Emergency, Garage

EFFICERE #ad - Popular size coverage: set comes with a heavy duty storage pouch and includes 24 pieces high quality wrenches that exceed ansi standard: sae 1/4, 15, 3/4, 5/8, 1/2, 11, 14, 17, 1 in.

And metric 8, 21, 19, 3/8, 7/16, 18, 10, 7/8, 5/16, 11/16, 9/16, 12, 13, 13/16, 24 mm. More torque: raised panel wrench design provides more leverage and gripping power. Premium material: constructed from high strength drop forged and heat treated chrome vanadium steel. Durable finish: corrosion and rust resistant chrome plating finish for durability and extended tool life. Easy to use: precisely manufactured 12-point offset box end and 15-degree angled open end for easy access to fasteners in tight spaces.
Part NumberWR-001



JEGS W1069 Polished Chrome Wrench Set

JEGS #ad - Sae & metric. Handy storage rack. 22 pieces Includes:. Sae sizes: 1/4", 1/2", 3/4", 7/16", 5/16", 11/16", 3/8", 5/8", 9/16", 13/16" and 7/8". Metric sizes: 9mm, 14mm, 17mm, 11mm, 10mm, 15mm, 12mm, 16mm, 13mm, 18mm and 19mm.
BrandJEGS #ad
ManufacturerWIOGW #ad
Height1 Inches
Length10 Inches
Weight0.01 Pounds
Width10 Inches
Part NumberW1069

3. Jaeger


Our standard in combination wrench sets from gear to tip, JAEGER 24pc IN/MM TIGHTSPOT Ratcheting Wrench Set, MASTER SET Including Inch & Metric With Quick Access Wrench Organizer

Jaeger #ad - Powerful 7 stage construction for lifelong reliability: Our secret is drop forging & heat treating our amazing steel alloy. Quick access wrench organizer: avoid messy rollup bags just to get 1 wrench out! Not to mention the painstaking time it takes to organize, and perfectly roll up. Reduce bolt rounding: The reinforced open end holds on tight to fasteners for reduced bolt rounding.

Our ultimate tightspot wrench to work faster in small spaces: our incredibly priced, you stay glued to the fastener until the turning is done, 5 degree ratcheting movement is designed to access spots where standard wrenches will not have enough swing. Our wrench organizer almost magically cuts this time down to seconds. The 72 teeth inside the 100% steel ratcheting box end will speeds you through jobs quickly with no need to lift. 24 piece master set sizes: 1/4", 15mm, 10mm, 13mm, 9mm, 9/32", 18mm, 5/16", 11mm, 11/32", 3/4", 5/8", 14mm, 7/8" & 8mm, 17mm, 16mm, 1/2", 7/16", 12mm, 9/16", 3/8", 11/16", 19mm.

And without lifting, even if you're reaching deep into a compartment or appliance. Aerospace grade vanadium hardens our steel alloy even more, while chromium helps to prevent corrosion. Guaranteed forever: if, just return it, you don't absolutely love your Jaeger Tools ratcheting wrench, for whatever reason, and we'll refund every penny Or replace it, if there is a problem. Habitat for humanity donor: When you build your dreams with us, it enables us to build other's dreams.
BrandJaeger #ad
ManufacturerJaeger Tools #ad
Height3 Inches
Length11.5 Inches
Weight6.54 Pounds
Width7.5 Inches
Part Number24PCRW



1” and Metric 8mm, 24mm…, wrench set metric and standard, HORUSDY 26-Piece Combination Wrench Set with Roll-up Pouch, SAE 1/4”

HORUSDY #ad - Equipped with wrench rolling bag, easy to organize and carry. These wrenches are made of high strength drop forged and heat treated chromium vanadium steel. Clearly mark the dimensions for easy identification and improve work efficiency. Ansi standard metric wrenche: 8, 18, 10, 9, 19, 12, 17, 15, 21, 14, 11, 13, 24 MM. Prevent sliding or wear of fasteners. Ansi standard sae wrenche: 1/4, 1/2, 3/8, 11/16, 5/8, 7/8, 9/16, 7/16, 3/4, 13/16, 5/16, 11/32, 1 inch. Precision manufactured 12 point offset box end and 15 degree open end make fasteners easier to access and stronger grip.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height4 Inches
Length14 Inches
Weight6.84 Pounds
Width4.2 Inches

5. Stalwart


Stalwart 75-HT3009 Combo SAE & Metric Wrench Set with Carry Case, 22 Piece

Stalwart #ad - Drop forged chrome Vanadium Resists Abrasion, Oxidation and Corrosion. Metric wrenches 6mm, 9mm, 14mm, 11mm, 15mm, 12mm, 8mm, 13mm, 7mm, 10mm, 17mm. Sae wrenches 1/4", 11/32", 1/2", 3/8", 7/16", 5/16", 19/32", 9/16", 11/16", 5/8", 3/4". Durable carrying case for storage organization, width: 2. 5 inch, carrying Case Dimensions: Length: 6. 75 inch, height: 8. 5 inch. Open end and 12 point boxed End for Max Torque and Rounding Prevention.
BrandStalwart #ad
ManufacturerTrademark GLB #ad
Height8.5 Inches
Length6.75 Inches
Weight3.31 Pounds
Width2.5 Inches
Part Number75-HT3009



8 pieces DWMT73809, SAE, DEWALT Combination Wrench Set

DEWALT #ad - Sizes stamped twice on both sides of wrench handle for easier size identification. Stamped markings provide permanent visibility and prevents wear over time. 15 degree offset open end allows an increased range of arc swing in tight spaces. Full polish Chrome. Stamped hashmark pattern on SAE combination wrench set handle provides added grip points. Combination wrench Set Comes with Lockable Stacking Cases. 13 degree offset box end for knuckle clearance. Directtorque Technology helps prevent rounding of fasteners. Longer panel design gives more torque during use.
BrandDEWALT #ad
ManufacturerDewalt #ad
Height15 Inches
Length8 Inches
Weight3.3 Pounds
Width3 Inches
Part NumberDWMT73809
WarrantyLimited Lifetime Warranty



TOOLGUARDS 26 Pieces INCH/MM slim profile Ratcheting Wrench Set with Rack Organizer

TOOLGUARDS #ad - Chrome vanadium steel - best steel on the market. Why are we different? because we have the slimmest profile on the market so you can reach those tight spaces in engine blocks or behind water heaters.

The 72-tooth ratchet gears need only a 5-degree working swing arc. Full-drive box ends deliver reliable torque to tighten or loosen any bolt without rounding. 26 pieces ratcheting wrench set - with mirror finish includes 13 metric + 13 sae wrenches - 6mm, 9/32″, 9mm, 11/32″, 11/16″, 3/4″, 16mm, 7mm, 18mm, 12mm, 9/16″, 3/8″, 19mm and 1/4″, 13mm, 7/16″, 15mm, 5/8″, 5/16″, 17mm, 10mm, 8mm, 14mm, 1/2″, 17/64″, 7/8 ″. Lifetime warranty & customer service - if you have any questions or issues, please don't hesitate to send the seller a message through Amazon and we will respond within 24 hours. Comes packed in two wrench rack organizer for easy and quick access.
ManufacturerFXSWEDE #ad
Part Number26 pc-rack



35720A-02, GEARWRENCH 20 Piece SAE/Metric Ratcheting Combination Wrench Set

GEARWRENCH #ad - Bright, full polish chrome finish wipes easily clean to resist rust and corrosion. 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs.

Size conveniently stamped on both ends of the beam for quick identification. Off-corner loading design on box end provides better grip and reduces fastener rounding. Manufactured from alloy steel for better strength and longer tool life. Thin head and beam provide greater access in confined work areas. Pass-thru technology works down any length of threaded rod and long bolts. 30° for standard wrenches. Includes sae sizes: 1/4, 5/8, 16, 7/16, includes metric sizes: 6, 9/16, 12, 14, 8, 17, 11/16 and 3/4 in, 3/8, 1/2, 15, 13, 5/16, 11/32, 10, 18 millimeter.
ManufacturerApex Tool Group #ad
Part Number35720A-02
WarrantyStandard Limited Lifetime

9. Craftsman


32-Piece CMMT12080, CRAFTSMAN Wrench Set, SAE / Metric

Craftsman #ad - Meets or exceeds ASME Specifications. Quick size identification: Large Markings. Additional knuckle clearence: Wreches Set for Mechanic Comes with 15-degree Box End Offset. Corrosion resistance: Full Polish Chrome Finish. Quick engagement: mechanic Tools Have 12 Point Box End with Fastener. Full lifetime warranty, refer to "Warranty & Support" section below for full details.
BrandCraftsman #ad
ManufacturerCRAFTSMAN #ad
Height2.37 Inches
Length17.3 Inches
Weight12.17 Pounds
Width4.57 Inches
Part NumberCMMT12080



44 sizes in 2 Piece, 8-inch&10-inch, DURATECH Universal Wrench Set, SAE & Metric, ANSI standard, Drop Forged

DURATECH #ad - With this total wrench you can do so many thing without the need of changing wrenches of different sizes since this multi facet. Specialized wrench design allows work on multiple types of fasteners including 6-point, 12-point, triangle, E-Torx, square, and most rounded out fasteners.

The 8-inch universal wrench fits both standard 3/16 '' to 5/8 '' and metric 5mm to 16mm nuts and bolts; 10-inch universal wrench fits both standard 11/16 '' to 1-1/16 '' and metric 17mm to 27mm nuts and bolts, adjust the size by moving the middle push block. The working torque reaches 1.

2 times of the american standard of the double box end wrench, and the destruction torque reaches 1. 4 times of the American standard of the double box end wrench. Different sizes meet your different needs. Drop forged, heat treated, mirror polish, double thread, and electroplating. Exceeds ANSI specifications. This wrench can do both american standard and Metric.
Part NumberDTUTW02