As an Amazon Associate I earn from qualifying purchases.
Woodpeckers #ad - Mark from the 1/4" side on both edges of 3/4" stock and you’ve just laid out a perfectly centered mortise or tenon. Use the 3/8" side to locate center of 3/4" stock for joinery or hardware installation.
Woodpeckers #ad - If for any reason, your square isn't, simply return it to us for immediate repair or replacement. Carpenter tools - light weight, easy to grip and machined from aluminum so it won't chip your tools.
Quality - machined from aluminum, this minisquare is lightweight and features a dark red anodized finish which makes it easy to detect any gaps. Fits in your pocket or its own custom fitted tray.
EANOSIC #ad - 15 pcs blocks solid aluminum Construction Black Anodized to better protect router bits and saws. Stack setup bars for a wide variation or sizes, or use on their own, work and measure quickly.
Set up gauge blocks are all 3 inches long. The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.
Milescraft #ad - Two quick angle finders for 30° and 45°angles. Elongated notches for accurate line scribing. 6” 150mm square with 1/4″ notch spacing. Anodized aluminum material with 3mm thickness. Inside and outside scales for measuring and marking the inside and outside of your work piece.
WORKPRO #ad - Wide versatility - easy-to-read level vial and a metal scriber on the side of the combination ruler increase product practicality and versatility. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale value: 1/16”, 1/32” and 1mm. User-friendly - lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge.
The rafter square can be used as a guide for cross-cutting lumber. It has permanent deep markings and white graduations for max Readability any lighting.
They both work accurately at an angle 90 degree or 45 degrees. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish. Clearly identifiable scale - the rafter square finishing features low glare and protective powder coated. Durable material - the rafter square is die-cast from heavy-gauge aluminum alloy which enable it to last long and still give accurate measurement.
DFM Tool Works #ad - Outer dimensions 2. 625" x 1. 625" x 0625". Can be used as a Saddle Square to Transfer Lines. Center marking hole 11/32" 034" to allow larger pencils. All components including pins Made in USA. Center marking hole Bottom is 1/16" diameter for consistent center mark.
Woodpeckers #ad - The 3/8 inch offset locates the center of a 3/4" board instantly. Built in simplification - the 1/4 inch offset simplifies dividing standard 3/4 inch stock by thirds.
Includes - you will receive a 3 1/2 inch stainless Steel Delve Square from Woodpeckers. Made in usa - like all woodpeckers products, OH facility, the Stainless Steel Delve Square is proudly machined and carefully inspected in our Strongsville, just south of Cleveland.
Swanson Tool Co., Inc #ad - Includes: pocket-size swanson Blue Book Of Rafter Length And Roof Construction. Features: speed square features easy use in place Of A Try Square, Miter Square, Line Scriber, Saw Guide, And Protractor.
Woodpeckers #ad - Both the blade and base are machined from a single aluminum block. The 1281 square starts as a solid piece of extremely stable cast aluminum tool plate.
1. Woodpeckers
#adPrecision Woodworking Square Great For Furniture and Cabinet Making, Woodpeckers Delve Square
#adMore information #ad
One side of the base is 1/4" from the blade and the other is 3/8". The base wraps around your stock for a positive, accurate reference. That wrap-around feature also lets you mark the face and edge at the same time.| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers LLC #ad |
| Weight | 1 Pounds |
| Part Number | delvesq-20 |
More information #ad
2. Woodpeckers
#adPremium Precision Woodworking Tools, Aluminum, Woodpeckers Mini Square, Red, Check Square on Carpenter Cutting Tools, Small Pocket Wood Working Tool
#adQuality - machined from aluminum, this minisquare is lightweight and features a dark red anodized finish which makes it easy to detect any gaps. Fits in your pocket or its own custom fitted tray.
More information #ad
Made in usa - this premium, precision woodworking tool is built in the USA. Lifetime warranty - we cover our precision aluminum squares by a Lifetime Guarantee to stay square to within a minimum of. 001” or we'll replace it. Precision - measuring at 1-1/8 inch by 2 inch inside dimension, the Woodpeckers Mini Square is designed for checking the edge of your cutting tools for square.| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers Inc. #ad |
| Height | 1 Inches |
| Length | 3.25 Inches |
| Weight | 0.2 Pounds |
| Width | 2.5 Inches |
| Part Number | MINISQUARE |
| Model | MINISQUARE |
More information #ad
3. EANOSIC
#adBars Include Laser Engraved Size Markings, Setup Blocks Height Gauge Set, 15pcs Precision Aluminum Setup Bars for Router and Table Saw Accessories Woodworking Set Up
#adSet up gauge blocks are all 3 inches long. The setup blocks can easily set the height of the fence, blades bits and other cutters according to the needs, which is faster and more accurate than using a combined ruler.
More information #ad
Fitted case included, so it will be more tightly protected during transportation. Combine bars to setup 100's of measurements. Easy-to-read laser etched labels on each block. Accurate gauge block set sizes: 1/16", 1/4", 3/4", 5/16", 1/8 ", 3/16", 15/32", 7/32", 23/32", 3/8", 5/32", 3/32", 1/2", 7/16", 1x2x3".| Brand | EANOSIC #ad |
| Manufacturer | EANOSIC #ad |
| Part Number | E21626-15 |
More information #ad
4. Milescraft
#adMilescraft 8409 MC-Square150 imperial, Aluminum Framing and Woodworking Square, 1 Pack
#adMore information #ad
| Brand | Milescraft #ad |
| Manufacturer | Milescraft #ad |
| Part Number | 8409 |
| Model | 8409 |
| Warranty | 3 year manufacturer |
More information #ad
5. WORKPRO
#adWORKPRO Rafter Square and Combination Square Tool Set, 7 in. Aluminum Alloy Die-Casting Carpenter Square and 12 Inch Zinc-Alloy Die-Casting Square Ruler Combo Rafter Square Layout Tool
#adThe rafter square can be used as a guide for cross-cutting lumber. It has permanent deep markings and white graduations for max Readability any lighting.
More information #ad
The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage. The spring screw of the combination square makes you easier to detach the stainless steel ruler and smooth ruler is easier to slide for your measurement. Multiple graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, miter square, and protractor square. They both work accurately at an angle 90 degree or 45 degrees. The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish. Clearly identifiable scale - the rafter square finishing features low glare and protective powder coated. Durable material - the rafter square is die-cast from heavy-gauge aluminum alloy which enable it to last long and still give accurate measurement.
| Brand | WORKPRO #ad |
| Manufacturer | HANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad |
| Height | 1.97 Inches |
| Length | 13.98 Inches |
| Width | 5.71 Inches |
| Model | NOVASAT-0409-1513-35 |
More information #ad
6. DFM Tool Works
#adDFM Small Square and Marking Center Finder Precision MADE IN USA Blue
#adMore information #ad
| Brand | DFM Tool Works #ad |
| Manufacturer | DFM Tool Works #ad |
| Height | 0.63 Inches |
| Length | 2.63 Inches |
| Width | 1.63 Inches |
| Part Number | DFM Small Square |
More information #ad
7. Woodpeckers
#adWoodpeckers Stainless Steel Delve Squares, 3 1/2 Inch Square With Rack It Mounting Kit, Precision Woodoworking Tools for Furniture Making
#adIncludes - you will receive a 3 1/2 inch stainless Steel Delve Square from Woodpeckers. Made in usa - like all woodpeckers products, OH facility, the Stainless Steel Delve Square is proudly machined and carefully inspected in our Strongsville, just south of Cleveland.
More information #ad
The square includes its own Rack-It mounting kit for wall hanging. Precision woodworking - the scribing holds guide your pencil for perfect parallel lines and you can use thje set-up block sections for drill press or router bit depth of cut. Milled beam - the beam is milled giving you set-up bloacks of 1/4, 3/8, 1/2 and 3/4 inch.| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers Inc. #ad |
| Part Number | DELVSS3-20 |
| Warranty | Materials and workmanship are guaranteed for the life of your tool. |
More information #ad
8. Swanson Tool Co., Inc
#adSWANSON S0101CB Speed Square Layout Tool with Blue Book and Combination Square Value Pack
#adMore information #ad
Easy to use: kit is ideal for roofing work, Whether You'Re New On The Job Or A Pro. Product Type : Tools.| Brand | Swanson Tool Co., Inc #ad |
| Manufacturer | Swanson Tool Company, Inc #ad |
| Height | 8.5 Inches |
| Length | 1 Inches |
| Width | 8.5 Inches |
| Part Number | S0101CB |
| Model | S0101CB |
| Warranty | As Labeled |
More information #ad
9. Woodpeckers
#adWoodpeckers Precision Woodworking 851 Square 8-inch x 5-inch, Wall-Mountable, Imperial
#adWoodpeckers #ad - All 851 squares come in a custom-fitted case. We even mill a notch at the inside corner of the square so you can “zero-out” your layout line all the way to the edge of your work.More information #ad
Squares are accurate to within. 001 inch or less along the full length of the tool. Imperial Version. The blades on both squares are ¼” thick and the handle is a full ¾”.| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers Inc. #ad |
| Height | 1.5 Inches |
| Length | 8.5 Inches |
| Weight | 2.9 Pounds |
| Width | 11.25 Inches |
| Part Number | 851I-W |
More information #ad
10. Woodpeckers
#adWoodpeckers Precision Woodworking Tools 1281R Woodworking Square Imperial
#adMore information #ad
Both the blade and base are machined from a single aluminum block. This large plate is carefully machined in multiple high RPM passes on Woodpecker's state of the art CNC equipment. Imperial Version.| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers Inc. #ad |
| Height | 1.75 Inches |
| Length | 14.5 Inches |
| Weight | 5 Pounds |
| Width | 10 Inches |
| Part Number | 1281R-W |
More information #ad
