Top 10 Upcut Spiral Bit 1/4 – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. Whiteside Router Bits

#ad

Whiteside Router Bits RU2100 Standard Spiral Bit with Up Cut Solid Carbide 1/4-Inch Cutting Diameter and 1-Inch Cutting Length

#adWhiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.

Brand	Whiteside Router Bits #ad
Manufacturer	Whiteside #ad
Height	5.5 Inches
Length	2 Inches
Weight	0.06 Pounds
Width	3 Inches
Part Number	RU2100
Model	RU2100

2. SpeTool

#ad

SpeTool Spiral Router Bits UpCut 1/4 inch Cutting Diameter 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Woodwork Mortise Slot Carving Engraver

#adSpeTool #ad - The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dados with clean edge and bottom, better than straight bits. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length. Industrial quality control to ensure best performance.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	SP-D1/4-1/4-U

3. SpeTool

#ad

1/4 inch Shank 3 inch Extra Long HRC55 Solid Carbide CNC End Mill for Wood Cut, SpeTool Spiral Router Bits with UpCut 1/4 inch Cutting Diameter, Carving

#adSpeTool #ad - Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Solid carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet.

Brand	SpeTool #ad
Manufacturer	SpeTool #ad
Part Number	W04014

4. POWERTEC

#ad

POWERTEC 73002 Solid Carbide Router Bit – Standard ¼ Shank Spiral Bit with Up Cut, ¼ Inch Cutting Diameter and 1-Inch Cutting Length

#adPOWERTEC #ad - Applications: perfect wood cutting tools for an assortment of professional and DIY woodworking projects that require clean and sharp router cuts – Works exceptionally well with woods and hard plastics.

Shank dimension: bit cuts a 1/4” and has a 1/4” shank | Designed to help eliminate chipping on your workpiece. Premium quality: made with premium carbide and precision ground for proper balance and industrial quality control. Function: spiral bits can be used for upcut grooves and slots, jasper circles, mortises, dados and rabbets – The plunge cut leaves clean edges and a smooth top surface, much better than straight flute bits. Includes: 1 solid carbide Router Bit w/ Spiral Up Cut.

Brand	POWERTEC #ad
Manufacturer	POWERTEC #ad
Height	0.69 Inches
Length	2.88 Inches
Width	0.69 Inches
Part Number	73002
Model	73002

5. Freud

#ad

Freud 75-102: 1/4" Dia. Up Spiral Bit

#adFreud #ad - 1/4", overall Dia. 1/4", overall length 2-1/2", Carbide Height 1". Coating for cool cutting edge and superior chip evacuation. Black i. C. E. Ideal for grooves and dadoes in all composition materials, plywood, hardwood, and soft wood.

Combines effective chip removal with a cut unmatched by standard straight bits. Freud premier Solid Carbide. Use in cnc, hand-held and table-mounted routers. Fast chip removal with excellent quality and long life. Black i. C. E. Suited for cutting mortises and routing deep blind holes. Freud tico hi-density Carbide = 2X increased life and performance vs. Manufacturer's limited lifetime warranty. Standard uncoated bits. Specs: number of cutters 2, shank dia. Computer-designed flutes provide chip removal required in production settings.

Brand	Freud #ad
Manufacturer	Freud #ad
Height	1 Inches
Length	1 Inches
Weight	0.08 Pounds
Width	1 Inches
Part Number	75-102
Model	75-102
Warranty	Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4494

6. HAMILY

#ad

PANHAM 1/4" 3 Flute Spiral Upcut Bit CNC Router Bit Solid Carbide with Shank Diameter 1/4",1/4" X 1" X 1/4" X 2-1/2"

#adHAMILY #ad - Industrial quality router bits. Premium solid carbide. High precision grinding and polishing surface. 1/4" shank diameter, 1" cutting length, 1/4" cutting diameter, 2-1/2"total length, 3 flutes. Upcut- 3 flutes spiral bits CNC Router Bit.

Brand	HAMILY #ad
Manufacturer	HAMILY #ad
Height	0.25 Inches
Length	2.5 Inches
Width	0.25 Inches

7. EANOSIC

#ad

1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC 1/4" Shank Up-Cut, Upcut Spiral Flush Trim Router Bit

#adEANOSIC #ad - Industrial quality upcut flush trim router bit: made of solid virgin carbide with NANO blue coated. The 1/4-inch flush trim router bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.

The two independent ball bearings with forced on steel collars at the tip of each bit ensures smooth worry free use. Professional flush trim router bit with top bearing: 1/4” Shank, 1” Cut Length. This provides longevity and produces cutting results of the highest quality. Up to 2. 5x longer life compared to uncoated bits. The spiral router bit suit for CNC router and any plunge routers with 1/4" collet. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity.

Brand	EANOSIC #ad
Manufacturer	EANOSIC #ad
Part Number	E2109

8. MLCS

#ad

MLCS 200 Solid Carbide Spiral Upcut Bit Starter Set, 3-Piece

#adMLCS #ad - Solid micro grain carbide cuts smooth and stays sharp. Remove sawdust and wood chips from plunge cuts with upward shearing. 3 popular sizes included: 1/4-Inch, 3/8-Inch, 1/2-Inch diameter. 1/4-inch and 1/2-Inch shanks. Perfect for deep mortises and cutting dadoes in a router table.

Brand	MLCS #ad
Manufacturer	MLCS #ad
Part Number	200
Model	200

9. CMT

#ad

1/4-Inch Shank,Silver, 1/4-Inch Diameter by 2-1/2-Inch Length, CMT 191.008.11 Solid Carbide Upcut Spiral Bit

#adCMT #ad - Premium quality solid Carbide, Excellent finish on the workpiece lower side Upward chip ejection. Also for use on hand-held routers equipped with chucks or adaptors. 1-inch cutting length, 2 Cutting Edges, Right-Hand Rotation. For cutting, sizing and routing wood products, copying, plastic & laminates. For use on machining centers, point to point machines, CNC routers.

Brand	CMT #ad
Manufacturer	CMT #ad
Height	0.25 Inches
Length	2 Inches
Weight	0.1 Pounds
Width	0.25 Inches
Part Number	191.008.11
Model	191.008.11
Warranty	CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.

10. EANOSIC

#ad

Carving, Extra Long 3 inch Solid Carbide with Nano Blue Coating CNC Router Bits End Mill for Wood Cut, 1/4 inch Cutting Diameter, EANOSIC Upcut Spiral Router Bit 1/4 inch Shank

#adEANOSIC #ad - End mill bits can smoothly upcut groove and slots, finish machining, cycles and dados with clean edge and bottom, mortises, end milling, better than straight bits. Solid carbide and nano blue coated: the up-cut spiral router bit is made of solid carbide.

Cnc spiral bits used for side milling, etc. The cnc end mill router bits apply to various wood: such as plywood, and any hardwood working and Long service life for sharp. Clean surface, neat, no glitches. The router bit suit for CNC router and any plunge routers with 1/4" collet. And also for carbon steel, oaK, cast iron, tool steel, MDF, soft alloy steel, aluminum alloy.

Upcut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, extra long 3 inch for total length. And nano blue coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Up to 2. 5x longer life compared to uncoated bits.

Brand	EANOSIC #ad
Manufacturer	EANOSIC #ad
Part Number	E202