Top 10 Ujk Drill Guide – Power Drill Chucks

As an Amazon Associate I earn from qualifying purchases.

1. Milescraft

#ad

Self-Centering Drill Guide Base, Milescraft 1318 DrillMate Portable Drill Guide, Compatible with most 3/8 in. Drill Accessories, Multi-Angle Drill Guide Attachment, Multi-Angle Readouts

#ad
Milescraft #ad - Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Adjustable depth stop and spring action control of the head. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height2 Inches
Length16.63 Inches
Weight0 Pounds
Width7.13 Inches
Part Number1318
Model1318

2. KANZAWA

#ad

Kanzawa Drill guide DX K-802

#ad
KANZAWA #ad - This product is the successor to the k-801. The depth of the hole can be freely determined by adjusting the position of the stopper. Product details ・chuck: 10mm drill chuck ・shank: 10mm/round/three-sided ・Total length: 260mm ・Stroke: 130mm ・Weight: 1, 350g. The main body is made of lightweight and durable die-cast aluminum. Thumbscrews are large in diameter and easy to tighten. The base has scribed lines to make it easy to find the center.
BrandKANZAWA #ad
ManufacturerKanzawa #ad
Height2.2 Inches
Length10.2 Inches
Weight2.98 Pounds
Width6.1 Inches
Part NumberK-802
ModelK-802

3. Woodpeckers

#ad

Portable Drill Guide, Woodpeckers Auto Line Drill Guide, Drill Up To 2 Inch Holes, Versatile Base and Fence System

#ad
Woodpeckers #ad - Made in the usa - the auto-line drill Guide is precisely machined and carefully inspected in our Strongsville, Ohio factory just south of Cleveland. The base is drilled and tapped for the fence guide rods on all four edges so there's always a direction you can extend the fence.

Laser engraved center lines - The base of the Auto-Line Drill Guide has laser engraved centerlines on the perimeter of the opening. Keep your drill bit perfectly perpendicular - The Auto-Line Drill Guide is a portable tool that allows you to drill perfect perpendicular holes up to 2 inches without a drill press.

Versatile fence - the fence adjusts to the base along a pair of stainless steel guide rods. Drill up to 2" holes - the opening in the base has clearance for drills up to 3/4", simply remove the column caps, and when you need larger, turn the chuck carrier around so it is outside the base and drill up to 2" holes.
BrandWoodpeckers #ad
ManufacturerWoodpeckers Inc. #ad
Part NumberALDG-21
ModelALDG-21

4. Milescraft

#ad

Milescraft 1312 DrillBlock- Handheld Drill Guide

#ad
Milescraft #ad - Centerlines ensure accurate alignment when drilling into various surfaces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too. Package dimensions:3. 05"l x 5. 33"w x 14. 48"h. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces.
BrandMilescraft #ad
ManufacturerMilescraft Inc. #ad
Height1.25 Inches
Length8 Inches
Weight0 Pounds
Width2.75 Inches
Part Number13120103
Model1312

5. Woodpeckers

#ad

Woodpeckers Extended Slab Flattening Mill, Slab Clamping Dogs & Rails, With Router Sled, Great for DIY Live Edge Slab Tables

#ad
Woodpeckers #ad - Includes: includes 4 72" rails, 1 router sled, 2 48" rails, 4 Slab Clamping Dogs and all assembly hardware. Remember, you can always mount the rails closer together when it suits your project.

These huge capacities are great…when you need them. Make your own slab tables: with the woodpeckers Extended Slab Flattening Mill you can now use your router to flatten slabs right in your own shop faster and easier that you ever thought possible. The capacity grows to either 62” x 105” or 38” x 129”. Does not include plywood or MDF base. Huge capacity: the extended slab flattening mill adds an additional pair of 72" rails that can either replace the cross rails to increase width, though, or connect with the base rails to extend length. Built in usa: this Woodpeckers product is proudly built in the USA.
BrandWoodpeckers #ad
ManufacturerWoodpeckers LLC #ad
Height5 Inches
Length80 inches
Weight79 Pounds
Width11 inches
Part NumberSLBFLTXL

6. Rockler

#ad

0° to 60° Angle Drill Guide w/Easy-to-Read Protractor Scale, Self-Centering Portable Drill Guide, Full-Size Drill Press Accessories for Small Shops, Rockler Drill Guide w/Chuck Key

#ad
Rockler #ad - Accepts the optional Self-Centering Drill Vise sold separately or buy the two together as a bundle. The depth stop lets you drill to the same depth again and again, nice for repetitive tasks like shelf pins. Smooth, precise drill stand for hand drill: smooth, and free of play, precise, it gives you the accuracy and control of a drill press with the portability of a hand drill.

Just attach your drill to the 1/4'' hex shank and drill away. Drilling guide: get the precision of a portable drill press with the portability of a hand drill, ideal for small shops that lack the space for a full-size drill press. Glassy smooth ball bearings in chuck housing for efficient transfer of power. Self-centering pins: our depth stop lets you drill to the same depth again and again without stopping to readjust multiple times.

Mounting holes on the base accept shop-made jigs, while the V-notches let you center holes in dowels and other round stock. Adjustable angle: our hand held drill guide can be used at any angle from 0° to 60° using the easy-to-read protractor scale. Comfortable casings: robust handles of our portable hand drill presses with comfortable rubber casings provide a substantial feel, while the hefty 1/2'' chuck grips large bits with ease.
BrandRockler #ad
ManufacturerRockler #ad

7. DEWALT

#ad

2-Speed, Magnetic, DEWALT Drill Press, 2-Inch DWE1622K

#ad
DEWALT #ad - Magnetic coolant bottle can be placed on either side of tool or on a work surface. 10 amp motor, 2-speed settingsl ;No Load Speed : 300/450 rpm. Overload protection electronics which prevent motor damage. Quick change chuck system. 4-3/8 inch drill travel offers maximum capacity for heavy duty applications. Drillpoint pressure @ 1/2" Steel Plate 12mm : 741 pounds.
BrandDEWALT #ad
ManufacturerDEWALT #ad
Height19.29 Inches
Length22.44 Inches
Weight33 Pounds
Width6.5 Inches
Part NumberDWE1622K
ModelDWE1622K
Warranty3 year limited warranty

8. ORTUBE

#ad

Cabinet Hardware Jig Tool, Adjustable Punch Locator Drill Template Guide, Wood Drilling Dowelling Guide for Installation of Handles Knobs on Doors and Drawer,Black

#ad
ORTUBE #ad - Is your ideal hardware woodworking tool. High corrosion resistance/High strength and hardness/High precision. Versatile cabinet hardware jig -- works on virtually any cabinet door stile and rails including shaker doors & recessed drawer fronts.

Come with a storage bag. 24 hours after-sales customers service, please contact us for any questions. Portable size -- punch locator drill guide can be split into small parts for easy to carry with taking a small space. Perfect for all construction worker, professionals, and cabinet makers. Prime quality drill guide -- made with high-quality stainless steel, aluminum, and ABS Plastic.

The quick-release drill guide block makes set up simple, and easy to setup for any length, set it up once and use it repeatedly -This template jig lets you measure out perfect hole positions for cabinet handles, pulls, and knobs. Premium durability -- our jig is strong enough for even contractors to use it thousands of times. Easy to use and save your time -- cabinet hardware jig makes set up simple and quick.
BrandORTUBE #ad
ManufacturerDahoo #ad
Height1.57 Inches
Length7.87 Inches
Width4.72 Inches
Part NumberDA013-1
ModelDA013-1

9. True Position Tools

#ad

Most Accurate Tool for Knobs and Pulls, Hand Calibrated by True Position Tools, The Original Cabinet Hardware Jig, Made in USA

#ad
True Position Tools #ad - Family-owned & operated for 25 years, we build tools that stand up to the daily use of a professional. Also installs shelf pin holes and hinge plates! Tighten thumb screws, and drill. Counterfeit jigs may look the same, but cannot mimic our extreme accuracy.

Take the stress out of installing hardware on your cabinets. Accurately install handles or knobs on any cabinet door and drawer front. Pays for itself after one install. Fully adjustable and reversible drill template, hold, set once and repeat. No clamps or marking needed. Proudly made in the USA. Diy simplicity with professional durability. Your jig includes lifetime bushing warranty and free replacement for 60 days if the jig is not absolutely perfect.

We use the highest quality materials and aerospace precision machining so that your knobs or pulls are placed exactly where you want them. Patent pending true calibration system with Perfect Match laser engraved rulers. Made and hand calibrated in California. Patent pending shaker spacers provide stability when drilling recessed shaker style drawer fronts.
BrandTrue Position Tools #ad
ManufacturerTrue Position Tools #ad
Height2.76 Inches
Length17.32 Inches
Weight2.2 Pounds
Width11.42 Inches
Part NumberTP-1934
ModelTP-1934

10. KREG

#ad

Kreg Tool KPHJ720PRO Pocket-Hole Jig 720 PRO

#ad
KREG #ad - Premium home improvement: jig helps DIYers create pocket-hole joints in plywood from 1/2 to 1 1/2-inch thick. Reliable carpenter tools: Durable polymer and steel frame construction will last through years of projects. Secure pocket-hole jig: drill guide has an anti-slip surface; clamping technology adjusts for a secure fit. Kreg tools: we offer products that help woodworkers close the gap between idea and outcome. Simple cabinet woodworking Tools: Convenient vacuum adapter and onboard storage simplifies cleanup.
BrandKREG #ad
ManufacturerKreg Tool Inc #ad
Height6.9 Inches
Length13.9 Inches
Weight7.9 Pounds
Width9.2 Inches
Part NumberKPHJ720PRO
ModelKPHJ720PRO
Warranty1 year limited