As an Amazon Associate I earn from qualifying purchases.
APFFSY #ad - After installing the lid hinges for wooden box, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut. Keep lid stay open — the lid support hinge holds the lid open until you want to close. Upward door open adjustable angle of 75°, 90°, and screw each mounting bracket.
Easy to install important：refer to our install videos ! — the lid closer can be mounted on the left or right side, 110°. Just mark two drilling holes, also used for side-mounting and top-mounting. No need to use the diagram on the package！.
Perfect for any lids or flaps when soft close lid support is required. Conditioned soft closing — only with this chest hinges supporting less than 50lbs and keeping two lid support hinges soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed. Similar purpose of a gas strut but doesn't self lift, chest hinges, stays and supports lid where you want it. Durable material — heavy lid hinge, max weight support 50lbs/2pcs.
SafeStay #ad - The lid stay allows the lid to open at a maximum 105 degree angle. Small compact design - the compact design allows for installation in tight fit areas.
This lid stay will hold the lid open until you are ready to close. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
MORINBO #ad - Sturdy lid stay with soft close excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. 2-way installation morinbo hinges can be installed on top opening or upward opening lids.
Compact design of lid stay hinge the compact design allows for installation in tight fit areas. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs.
And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch. Know before purchasing updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.
Apexstone #ad - Length center-to-center: 8. 7 inch220 mm, extended Length Center-to-Center:14. 2 inch360 mm. We offer 1 year 100% satisfactory warranty, please kindly contact us for exchange, if unfortunately our soft down lid gaS STRUT did not work well, refund or return.
Lids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers.
Ryf #ad - Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Durable lid support hinge--made of zinc ally in satin Nickel, Lid support can be mounted for flap support or bar counter function.
Wide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
APFFSY #ad - Conditioned soft closingonly with this chest hinges supporting less than 50lbs and keeping two soft close lid supports in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and prevent fingers from getting smashed. Durable material max weight support 50lbs/2pcs.
This up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance! Easy to install our soft close hinges can be mounted on the left or right side, also used for side-mounting and top-mounting.
Never worry about having to support lid by hand anymore. It's widely usage for box or chamber, cupboard, chest, closet, window seat, such as toy box, and wardrobe lids！. Adjustable tensionadjust tension with allen wrench to fit for lids with different weight. After installing the folding lid stay hinge, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut！.
Ravaver #ad - Gentle closing: all-new hydraulic slow-down mechanism for improved stability and safety. Strong support: for lid height of over 18in, handle lid weight from 13lbs to 17lbs per hinge, while 2 hinges double weight support from 26lbs to 34lbs.
Never worry about having to prop the lid open. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
Only takes 5 minutes to get installed by following the placement measurement card. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs. Before purchasing: do not support the lid at width over 45in and height over 28in. Lock lid open securely: hold your lid open at max 90 degrees until you are ready to push it shut.
WANLIAN #ad - Pressure:120n/26lb/12kg per strut;length hole center to hole center :9-11/16'';travel:3-14/25'', distance between ball mounts compressed: 6-1/8". Please select the correct model strictly according to the data sheet of the detailed picture. Stable & no rusty: gas struts is made of copper core with zinc plating, please contact customer service as soon as possible to send installation pictures or videos, which prevents from rusting even aftering using for a few years.
If there is a problem with the product or installation difficulties, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.
Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. Avoid the loss of gas in the cavity 3. The connection point should be installed flexibly without jamming. The choice is not soft and hard, and two for cabinet door width >600mm/23. 6in to achieve parallel opening and closing synchronization.
RUYUFE #ad - Easy to install lid support-- updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.
Compact design of lid stay hinge -- the compact design allows for installation in tight fit areas. This lid stay is deal for upward opening flaps, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay slow closing -- lid stay support built-in hydraulic dampening device. Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
WANLIAN #ad - We will refund or replace your order to provide a best solution! Applications: this gas spring lift is suitable for window bench seat with storage box, toy box, windows, rv cabinets or kitchen cabinets and so on.
1 year quality warranty: sen offers 1 year 100% satisfactory warranty. Heavy duty gas strut: 150n/33lb /15kg per strut, Total Length: 1063 inch, travel Length: 3.
1. APFFSY
#adLid Support Hinges Heavy Duty,Soft Close Hinges for Chest Toy Box,Lid Stay Support 50lb/2pcs APFFSY, Toy Box Hinges Soft Close
#adEasy to install important：refer to our install videos ! — the lid closer can be mounted on the left or right side, 110°. Just mark two drilling holes, also used for side-mounting and top-mounting. No need to use the diagram on the package！.
More information #ad
It can fit for most lids and allow you to keep your lids stay at any angle. Adjustable tension — adjust the toy box hinges soft close tension with allen wrench to fit for lids with different weight. It's widely usage as hinges for wooden box, such as toy box hinges, also fit for overhead kitchen cupboard, wardrobe lids too. Perfect for any lids or flaps when soft close lid support is required. Conditioned soft closing — only with this chest hinges supporting less than 50lbs and keeping two lid support hinges soft close in same tension by your adjustment will soft closing function work perfectly!! The safety hinges will go down slowly, and prevent fingers from getting smashed. Similar purpose of a gas strut but doesn't self lift, chest hinges, stays and supports lid where you want it. Durable material — heavy lid hinge, max weight support 50lbs/2pcs.
| Brand | APFFSY #ad |
| Manufacturer | APFFSY #ad |
| Height | 0.65 Inches |
| Length | 5.2 Inches |
| Width | 1.8 Inches |
More information #ad
2. SafeStay
#adSafeStay Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Chest, Easy to Install
#adThis lid stay will hold the lid open until you are ready to close. Easy install instructions - easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the left or the right side.
More information #ad
100% money-back guarantee - if for whatever reason you are unhappy with the product we will refund you, no questions asked! Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers. Holds lid open - never worry again about having to prop the lid open.| Brand | SafeStay #ad |
| Manufacturer | SafeStay #ad |
| Height | 0.5 Inches |
| Length | 4.5 Inches |
| Width | 3.1 Inches |
More information #ad
3. MORINBO
#adEasy to Install Pack of 2, Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors
#adCompact design of lid stay hinge the compact design allows for installation in tight fit areas. They can support lid weight from 5lbs to 10lbs and lower gently; Weight support will be doubled by using 2 lid supports 6lbs-20lbs.
More information #ad
The lid hinges supports opening the lid at a maximum Angle of 105 degree. Easy to install comes with an exclusive original design installation card, only takes 5 minutes to complete the installation by following the install placement measurement card and installation video. And per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch. Know before purchasing updated manual can be downloaded in amazon page. Easy to follow installation instructions ensure a perfect install the first time! Each lid hinge can be used for right or left hand mounting.
| Brand | MORINBO #ad |
| Manufacturer | MORINBO #ad |
| Height | 0.39 Inches |
| Length | 9.2 Inches |
| Width | 2.2 Inches |
| Model | MODP-145 |
More information #ad
4. Apexstone
#adApexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2
#adLids lower gently, ideal for soft cLOSING lid to prevent from slamming so that it won't smash kid's fingers.
More information #ad
Soft down the door/lid which the side length is less than 30 Inch, the WEIGHT is Less than 33 Lbs. How to install&adjust it:just install it as the image shown in the description or the instructions in the package, While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance.| Brand | Apexstone #ad |
| Manufacturer | Apexstonetek/Apexstone #ad |
| Part Number | GS5959 |
More information #ad
5. Ryf
#adRUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs
#adWide application--perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe. Soft close lid stay-every lid support can be adjusted in largest 75°、90° and 100° and used for Right or Left Hand mounting.
More information #ad
Easy to install lid support --the lid hinge is used for side mounting and top mounting. Max weight lid hinge--support 40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side. Installing screws and Allen wrench in package.| Brand | Ryf #ad |
| Manufacturer | Ryf #ad |
| Height | 0.15 Inches |
| Length | 8 Inches |
| Width | 1 Inches |
More information #ad
6. APFFSY
#adMax Weight Support 50lb/2pcs, Toy Box Hinges Soft Close,APFFSY Lid Support Hinges,Lid Stay for Chest Wardrobe Closet Cupboard Wooden Box
#adThis up-grated version has the advantages of strong bearing capacity, metal connector instead of plastic clip. Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance! Easy to install our soft close hinges can be mounted on the left or right side, also used for side-mounting and top-mounting.
More information #ad
Upward door open adjustable angle of 75°, 110°. Adjust by yourself, 90°, fit for most lids and allow you to keep your lids stay at any angle to your needs! Keep lid openthe lid support hinge will hold the lid open until you want to close. Never worry about having to support lid by hand anymore. It's widely usage for box or chamber, cupboard, chest, closet, window seat, such as toy box, and wardrobe lids！. Adjustable tensionadjust tension with allen wrench to fit for lids with different weight. After installing the folding lid stay hinge, please tighten the mechanism into Allen wrench hole in the middle of the arms to set up appropriate pressure, prevent lid from slamming shut！.
| Brand | APFFSY #ad |
| Manufacturer | APFFSY #ad |
| Height | 0.65 Inches |
| Length | 5.2 Inches |
| Width | 1.8 Inches |
More information #ad
7. Ravaver
#ad26LBS-34LBS Heavy Duty Lid Stays 90 Degrees Open with Easy-to-Install Card, Sold in Pairs Black, Ravaver Toy Box Hinges Soft Close
#adNever worry about having to prop the lid open. Easy to lift and lower the top of storage chest, window seat bench, piano bench and more trunk.
More information #ad
Note: one hinge for left-hand mounting, and the other one for right-hand mounting. The lid stay will close lid softly while holding up with sturdy support, and prevent slammed doors and smashed little fingers. Only takes 5 minutes to get installed by following the placement measurement card. For lid height of over 25in, each hinge supports 7-9lbs and both hinges do 14-18lbs. Before purchasing: do not support the lid at width over 45in and height over 28in. Lock lid open securely: hold your lid open at max 90 degrees until you are ready to push it shut.
| Brand | Ravaver #ad |
| Manufacturer | Ravaver #ad |
More information #ad
8. WANLIAN
#adSoft Close Hinges, Toy Box Hinges, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Lid Support, Gas Strut, Lift Supports, Gas Shocks, Pressure:120N/26lb/12KG2 Pack, Gas Spring
#adIf there is a problem with the product or installation difficulties, if unfortunately our SOFT OPEN LID GAS STRUT did not work well, please kindly contact us for exchange, refund or return.
More information #ad
If you need to adjust the direction of the joint, not upside-down, you can only turn it to the right. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door. Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. Avoid the loss of gas in the cavity 3. The connection point should be installed flexibly without jamming. The choice is not soft and hard, and two for cabinet door width >600mm/23. 6in to achieve parallel opening and closing synchronization.
| Brand | WANLIAN #ad |
| Manufacturer | SEN #ad |
| Height | 0.7 Inches |
| Length | 10.5 Inches |
| Width | 0.6 Inches |
| Part Number | SEN |
More information #ad
9. RUYUFE
#adEasy to Install, RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors
#adCompact design of lid stay hinge -- the compact design allows for installation in tight fit areas. This lid stay is deal for upward opening flaps, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
More information #ad
Keep lid hinge stay opening, such as toy boxes and vanity lids, wide usage -- never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. The lid hinges supports opening the lid at a maximum Angle of 105 degree. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers. Lid stay slow closing -- lid stay support built-in hydraulic dampening device. Sturdy lid stay with soft close-- the lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
| Brand | RUYUFE #ad |
| Manufacturer | RUYUFE #ad |
More information #ad
10. WANLIAN
#adLid Support, Kitchen Cabinet Hinges. 150N/33lb/15KG, Soft Close Hinges, 2 Pack Gas Spring, Lift Supports, Gas Shocks, Toy Box Hinges, Gas Strut
#ad1 year quality warranty: sen offers 1 year 100% satisfactory warranty. Heavy duty gas strut: 150n/33lb /15kg per strut, Total Length: 1063 inch, travel Length: 3.
More information #ad
63 inch. Soft close hinges: this lid hinge can stop your toy box lid or cabinet door from slamming down, protect your fingers from being pinched. If there's a product quality issue or installation problems, please feel free to contact us. No-rusty: copper core piston and zinc-plating material keep gas strut away from rusting.| Brand | WANLIAN #ad |
| Manufacturer | moon-1 #ad |
More information #ad
