As an Amazon Associate I earn from qualifying purchases.
1. NTE Electronics #ad
NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length #adNTE Electronics #ad
- Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes. Available with standard or anti-static bobbins.
Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board. 100% copper wick has fine braid design to promote strong capillary action to pull in excess solder.
2. YCD #ad
Soldering iron tip cleaner + 0.6mm solder wire 1.76 oz / 50 g + Rosin Solder Flux Paste 0.35 oz / 10 g, no-clean soldering core 2.0mm, 4-in-1 welding tool set, 29.5 inches #adYCD #ad
- No cleaning, making it easy to correct errors on small PCB boards. Soldering iron tip cleaner - the best soldering iron Tip Cleaner and base, does not reduce the tip temperature. Welded 4-in-1 set-- contains 4 necessary welding products, saving you time to purchase multiple times.
Rosin - weighs 035 oz/10 g. Good fluidity, clean, uniform solder joints, uniform heating, contribute to the rapid completion of welding.
Removes more solder than traditional wicks, it has strong ability to absorb tin. Safe and clean to use. No-clean desoldering core - 2.
0mm wide and 29. 5 inches long, made of pure oxygen-free copper wire, low residue. Made of brass wire, no water, it is cleaner than traditional sponges. Solder wire - weight 1. 76 oz / 50 g. Promote the flow of solder, no need to clean, allow solder to form solid, less residue, improve the efficiency of welding process, lasting mechanical and electrical connections.
3. Herain #ad
Desoldering Wicks Removal Tool Solder Sucker Used to Remove the Solder and Disassemble Electrical Components9.84 ft Length 1, Desoldering Braided Wicks with Flux, Herain No-Clean Solder Wick #adHerain #ad
- 5. Ingenuity quality: 1 piece of no-clean solder braided wick 0078 inch wide, which is sufficient to meet your work requirements. 3. Widely used: no-clean desoldering wick is suitable for welding work in laboratories, schools and homes, industries, It is suitable for all kinds of electronics, precision instruments and meters.
4. Easy to use: the desoldering braid wick is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder.
1. High-quality materials: the desoldering wick is geometrically precisely braided with high-quality copper wire, low residual and no halide, which is resistant to oxidation and corrosion, has good thermal conductivity, and clean tin absorption. It can absorb tin quickly and a large amount of tin, electrical appliances, and is dedicated to remove excess solder.
The main board desoldering spot is removed, and it is used with the soldering station. If you have any product questions, 9. 84 ft length, you can contact us at any time. 2. Geometric braid design: the solder wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
4. Ferraycle #ad
Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance 6 Pieces, 0.1 Inch Wide and 59 Inch Long, No Clean Soldering Flux Pen and Solder Remover Wick #adFerraycle #ad
- Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin; The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, no leaking and safe for protecting the flux, which can enhance tension on the surface to absorb excess solder; The liquid solder pen is made of reliable materials, preventing you from touching the organic solvents.
Suitable size: the rosin flux pen measures about 14. 3 cm/ 5. 6 inches in length, and the solder braided wick is about 1. 5 m/ 59 inches long and 2. 5 mm/ 01 inches wide, which is convenient to hold in hand; Please check the size carefully before purchasing.
Package includes: you will receive 3 pieces of no clean solder flux pens, in total of 6 pieces, and 3 pieces of soldering braided wick, sufficient quantity and a considerate combination to meet your needs for daily use and replacement. Wide applications: these flux pens and braided solder wicks can be applied for laboratory, electronics welding, computer, etc. Home repairs and correcting small PCB board errors and through-hole solder joints, bringing a lot of convenience to your work and improving efficiency.
5. AUSTOR #ad
Desoldering Vacuum Pump Solder Removal Tool, AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick 2.0mm/2.5mm/3.0mm Width, 1.5m Length with Flux #adAUSTOR #ad
- Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering. High quality material - the desoldering pump body made of premium quality ABS material, anti-static, with non-slip sponge and nylon nozzle, heat resistant and durable.
High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand.
7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size. Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, can be used to clean the spare solder on the pin away to avoid short circuit, length 1. 5m, 2 pieces for each size; geometrically-precise weave, width 2. 0mm/2. 5mm/3. 0mm, to meet your various of soldering needs.
6. QJZXUEZHEN #ad
No-clean soldering core wick2.0mm, welding tool set, 29.5 inches, 60/40 Solder Wire Reel Fine 0.8mm 0.35 oz + Soldering Rosin Flux Paste Gel 0.35 oz, 0.8mm kit #adQJZXUEZHEN #ad
- Welding kit : 1 x high quality rosin core Solder Wire + 1 x Rosin soldering flux paste +1 x No-clean desoldering wick. Rosin: weighs 035 oz/10 g. Good fluidity, clean, uniform solder joints, uniform heating, contribute to the rapid completion of welding.
No cleaning, low residue. Removes more solder than traditional wicks, made of pure oxygen-free copper wire, making it easy to correct errors on small PCB boards.
Promote the flow of solder, improve the efficiency of welding process, allow solder to form solid, less residue, no need to clean, lasting mechanical and electrical connections.
Welding tool kit: suitable for electronic repair and DIY, TVs, stereos, cables, such as mobile phone motherboards, motors, headphones, VCRs, radios, any circuit board with small parts, toys and other electronic equipment. Solder wire: tin 60%-lead 40%. Diameter: 08 mm 0031 in; weight of solder wire: 10g 0022 lb. No-clean desoldering core : 2. 0mm wide and 29.
7. Youland #ad
Soldering Solder Iron Tip Cleaner + Solder Rosin Flux Paste 0.35oz/10g + Desoldering Wick Solder Braid Remover Wire Kit 2.5 ft for Electronics Soldering Repair DIY Work #adYouland #ad
- Youland service & package contents of solder kit —— we accept return, we guarantee you 100% satisfaction. Note: solder wick & flux were packed in the container. Ideal auxiliary item for manufacturing high-quality electronic products. Package include : 1 * soldering Iron Tip Cleaner, refund and replacement if you have any problem about the Welding Items.
No-clean 100% copper wick desoldering remover —— residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board; Its anti-oxidation stability and anti-corrosion ability make the desoldering wire has excellent performance in desoldering, bring you a lot of convenience & improve the efficiency of maintenance.
Your ideal choice of soldering solder accessories kit —— these 3 products are the most frequently used auxiliary products in the electric welding process, These 3 products are the most frequently used auxiliary products in the electric welding process.
The combined items make you no longer need to make multiple purchases, saving you time to focus on your soldering project. Just contact us freely, 1 * Solder Flux Tin 035oz/10g, 1 * desolder Copper Wick. Won't damage your soldering tips. To clean the tip, meaning less chance of oxidation and won't reduce tips temperature, softer than the tip plating, Avoid soldering iron cooling, improve welding efficiency. No water required, but harder than the oxidation that forms on the tip.
8. MG Chemicals #ad
MG Chemicals 454 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 50' Length x 0.1" Width, Blue #adMG Chemicals #ad
- Oxide-free clean copper. Static free bobbins. Designed to leave a residue that is environmentally safe. Manufactured under SPC guidelines. Only pure type 'rma' rosin is used meeting the requirements of MIL-F-14256F ANSI/J-STD-0004.
|Brand||MG Chemicals #ad|
|Manufacturer||MG Chemicals #ad|
9. MG Chemicals #ad
MG Chemicals 425-NS No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length #adMG Chemicals #ad
- Conforms to mil-f-14256e rma flux and J-STD-004. Environmentally and PCB safe residues. Nsf, nonfood compounds program Listed P1, NSF Registration #144209. Esd electrostatic dissipative safe for 1. 5 m 5 ft bobbins. High purity, oxide-free copper.
10. MG Chemicals #ad
425 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 5' Length x 0.075" Width, Green, MG Chemicals #adMG Chemicals #ad
- Static free bobbins. Designed to leave a residue that is environmentally safe. Oxide-free clean copper. Manufactured under SPC guidelines. Only pure type 'rma' rosin is used meeting the requirements of MIL-F-14256F ANSI/J-STD-0004.