As an Amazon Associate I earn from qualifying purchases.
1. Savannah #ad
3 piece Carbide Mini Turning Tool Replacement Cutter Set. 1 each 4 inch radius Square, Round and Diamond Shaped Cutters with 1 replacement screw #adSavannah #ad
- This produces much cleaner cuts and tends to be easier then using standard turning tools. Set includes the cutters only: 1 each round carbide cutter, 1 each 4" radius square carbide cutter, 1 each diamond shaped carbide cutter and 1 replacement screw.
These tips are compatible with Easy Wood Tool mini and mid-size Carbide Tips. We all know how "enjoyable" sharpening our turning tools can be. The carbide tips will stay sharper longer compared to standard turning tools as well.
We also know that if you don't have the tool at just the right angle when turning the results can be more than undesirable. When the mini carbide turning tool cutter dulls, simply rotate the tip for a fresh, clean cutting edge.
The tips are replaceable when needed sold in a pack of 3 with one of each cutter in the pack. The handles each have molded grips that provide better grip and less fatigue after extended periods of use. Unlike standard tools, when using carbide tipped cutter such as these, you keep the cutter straight in on the turning which produces a shearing action.
2. Savannah #ad
Round and Diamond Shaped Cutters, 3 piece Large Carbide Turning Tool Replacement Cutter Set. 1 each Square #adSavannah #ad
- Carbide turning tools have a couple of advantages of standard turning tools. The idea is that the razor sharp carbide shears the material to produce much cleaner cuts and tends to be easier to use than standard styles of turning tools. However, but depending on your turning tool thread size, the Savannah 3 piece cutter set may work with many other brands of carbide turning tools that you may already have in your shop.
We offer the cutters in a 3 pack that includes 1 each of the most commonly used profiles. This means you must use the screws that came with your original turning tool.
This pack also includes 2 screws for securing the cutters to the tool. Carbide cutters don’t so much cut your wood or material like standard turning tools. One of the most satisfying advantages is that we don’t have to sharpen tools when they become dull over time.
Another advantage is that they are ready to go right out of the box! No more making sure your brand new tool is sharp enough to start turning. These three cutters have been designed to replace the 3 cutters that come with the savannah 3 piece large carbide turning tool set. Set includes the cutters only: 1 each round carbide cutter, 1 each square carbide cutter and 1 each diamond shaped carbide cutter. Please note: the screws in this pack may or may not properly fit your turning tool.
3. YUFUTOL #ad
Pack of 5 Wood Turning carbide Cutter inserts Combination Set,For YUFUTOL Or Other Popular Wood Turning ToolsInclude Square, Square With Radius,Diamond,Round Shape Cutters Supplied with Screw #adYUFUTOL #ad
- Advantages：significantly Improved Efficiency And Turning Results, Save Time and Cost. Size and shape included: square14mm 15mm, round16mm, Square With Radius 15mm-2" Radius, Diamond Shape With Radius Point.
90* square and 2" radius fix full size rougher, Round Cutter Fix Full Size Finisher or Hollower, Diamond Cutter Fix Detailer.
All the carbide insert cutters supplied with screws, All You Need Is Find The Matched Wood Turning Tools Before Start Your Turning Job. This combination carbide inserts set will give the best selection For Your Wood Turning Job, It Fits YUFUTOL Brand Wood Turning Tools Or Other Similiar Brand Tools.
4. YUFUTOL #ad
Fits Planer/Helical Cutter Head and Wood Turning Tools, YUFUTOL 2" Face Radius R-50mm Wood Working Carbide Cutter inserts15X15X2.5-4 edge corner radius,Pack of 10 with 10pcs Screws #adYUFUTOL #ad
- K05 solid carbide cutter inserts providing you a better experience and durable use to general purpose wood, chipboard, plywood, MDF/HDF. If one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
Fits both popular helical planer cutter head or woodturning chisels, mount with 10pcs M6-10mm Screws. 4-edge square shape 15mmx15mm, round edges, with radius face -R50mm, all are of the same sharpness. Easy to replace your jointers and planers, also excellent accessory for wood turning tools.
5. YUFUTOL #ad
For Full And Pro Size Finisher Wood Turning Lathe Tools, YUFUTOL 5/8 Inch16mm Diameter Round Carbide Replacement Insert Cutter With 30 degree Cutting Angle, Pack of 10 #adYUFUTOL #ad
- Mounts with flat head screws M5x8mm, Leaves smooth finishing after cut. The perfect grade of carbide provides the best combination of the sharpness and durability. Excellent for hollowing bowls, Designed for all small &mid size hollowers Easy Finishers.
Designed with a 30° cutting angle ground to a razor finish for making smooth cuts in any hard wood. Per pack of 10 pcs round carbide insert cutters, Size DIA 16mm X THICK3. 0mm-r30*.
|Manufacturer||LA HARDWARE INC #ad|
6. Savannah #ad
Savannah Carbide Tip Turning Tool Large Size Round Cutter #adSavannah #ad
- To make turning even more enjoyable, the shaft of the savannah Carbide Turning Tool also features a flat back for stability while your turning. The savannah carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.
Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule. The comfortable rubber grip helps reduce hand fatigue while turning. Once the cutter head is completely used, simply replace it with a new carbide cutter.
The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning.
Easy wood turning on your lathe with savannah carbide turning tools. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The solid carbide stays sharper for a longer period of time in comparison to steel tools. The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule. The savannah large Carbide Turning Tools are designed with ease of use in mind.
7. DL TOOLS #ad
DLtools 11mm Square Carbide Insert Cutter 4-Edge11mm Length X11mm Width X2.0mm Thickness for Wood Working Woodturning tools,pack of 10 #adDL TOOLS #ad
- Best material-made of solid tungsten carbide, providing you a better experience and durable use. Most convenient-if one knife edge is dull or nicked, just turn it to another edge which greatly reduces you down time.
And all are of the same sharpness. Most practical-easy to replace your jointers and planers, excellent accessory for wood turning work.
Most professional-11 mmlengthx11mmwidthX2. 0mmthickness square straight carbide insert, Designed for numerous spiral/helical planer cutter head system, wood lathe Tools. Best manufacturers-We choose the best manufacturers to provide you with the best products.
|Brand||DL TOOLS #ad|
8. YUFUTOL #ad
YUFUTOL 10pcs 16mm Round Carbide Inserts Cutters Knifes Indexable Replacement Fits For Popular DIY Woodworking Lathe Wood Turning Finisher Hollower Tools With 10pcs M5x9mm screws #adYUFUTOL #ad
- The perfect grade of carbide provides the best combination of the sharpness and durability. Ideal for giving you a smooth finish on curved, concave surfaces, hollowing jobs and for general turning applications.
Designed for easy start finishers/full Pro hollowers, The right geometry or 30*cutting angle is ground to provide an edge that cuts cleanly and safely.
Per pack of 10 pcs round carbide insert cutters, size dIA 12mm X THICK2. 5mm-30*, comes with 10pcs M4X9mm Flat head screws for your convenience. Cutters have the perfect grade of carbide to achieve the best combination of sharpness and edge durability. Designed with a 30° cutting angle ground to a razor finish for making smooth cuts in any hard wood.
9. Asieg Tool #ad
Ci0 16mm Round Carbide Insert Cutter Knife Indexable Replacement with Screw Fits For Full And Pro Size Popular DIY Wood Turning Finisher Hollower Tools Woodworking Lathe 1pcs #adAsieg Tool #ad
- Leaves smooth finishing after cut. Material type：tungsten carbide, excellent for wood Howllowing, The right geometry or cutting angle is ground to provide an edge the cuts cleanly and safely.
Very perfect for finish the curved, concave surfaces, hollower jobs and for general wood turning applications. Size: 16mm5/8" diameter，3. 0mm thickness, 30 Cutting Angle, a countersink mounting hole. Leaves smooth finishing after cut.
10. OSCARBIDE #ad
OSCARBIDE 14mm Square Straight Carbide Cutters Inserts14 x 14 x 2.0mm JT Insert Knives for Woodworking Fits Popular Spiral/Helical Planer Cutter Head Wood Lathe Tools 10pcs #adOSCARBIDE #ad
- Cutter size:14mm length, 2. 0mm thickness, 14mm width, 4-indexable cutting edge, 30 Cutting bevel. Fit for spiral/helical planer cutter head system, DIY wood lathe Tools. Easy to operate, if one is dull, each blade has 4 sharp edges, just change it to the other side.
Made of solid tungsten carbide for longer use life, sharp and durable, smoother cutting work. 10 pieces per box, packed with a plastic container for safe and easy storage.
|Manufacturer||OSCARBIDE TOOL PTD #ad|