Top 10 Rockler Dust Collection Fittings – Vacuum & Dust Collector Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Rockler


Rockler Dust Collection Fittings – Polymer Dust Right Quick Change Multi-Port Tool Set w/Quick Change Handle, 2.5'' to 4'' Tool Ports, 4'' Keyed Bridge Hose Clamps – Shop Dust Collection Fittings

Rockler #ad - Easy to install: the two 4” inch dust collection fittings are ideal for larger tools like table saws, small band saws, jointers, while the two 2-1/2'' to 4'' Tool Ports fit nicely onto smaller tools like router tables, and planers, and benchtop tools.

What’s included? the 4 dust hose set includes 1 dust right quick change handle, 2 4'' Tool Ports, 2 2-1/2'' to 4'' Tool Ports, which is left attached to your dust hose, & 5 4'' Keyed Bridge Hose Clamps. Quickly transfer: our 4 inch hose for dust collector can quickly transfer a single 4'' dust collection hose from tool to tool—ports fit tools with 2-1/2'' or 4'' dust ports. Air flow adjustment: our rockler hose dust right 4 inch tool port has an airflow adjustment valve on the handle helps you to reduce airflow to prevent floor mats and other items from sealing off the opening.

Dust right quick change handle tool set: the dust collector fittings set lets you quickly move a single 4'' dust hose from tool to tool, eliminating the expense of permanent ductwork and a large dust collector. Our dust collection hose adapter also features a flexible rubber boot on one end that provides a tight connection.
BrandRockler #ad
ManufacturerRockler #ad

2. Rockler


Rockler 2.5” Dust Gate for Dust Collector, Blast Gate 2 1/2 w/ Bracket or Vacuum Fittings, Anchor Blast Gate Bracket Directly to Wall for Clean & Stable Operation, Dust Collection Fittings & Hoses

Rockler #ad - Our 2. 5” stablegate dust collector fitting easily anchors directly to the wall for clean and stable operation. Connect to your tools: just connect with your table saw, miter, router table, and any other tool with a compatible dust collection port to your shop vacuum dust collector or dust collection system.

Works great: opening the dust collector gate often pulls the hose away from the wall. Durability: our dust collector fittings are made with premium black ABS plastic, this unit was designed for durability and is abrasion resistant and also able to withstand daily wear & tear from dirt, sawdust.

Our dust collection hose allows you to regulate the airflow from one tool to the next. With its built-in mounting element, the StableGate takes care of everything. Blast gate 2 1/2 inch: unsecured dust collector blast gate can be sloppy and tedious to operate. Sturdy and effective: the dust blast gate improves the efficiency of dust collection systems for woodworking.
BrandRockler #ad
ManufacturerRockler #ad

3. Rockler


Dust Right 2.5'' Pack of 2 Dust Collection Ports – Port Fits for 2.5” Dust Collection Hose – Plastic Shop Vac Adapter – Rockler Dust Collection Fittings Includes Two Ports & Two Metal Hose Clamps

Rockler #ad - For smaller ports: to connect the handle to smaller 2-1/2" ports, use a Tool Port in conjunction with our shop vac hose adapter which is sold separately. Specially designed for dust right: the dust collection systems for woodworking are designed to work with the Dust Right handle, which is available either individually or in one of our Dust Right Packages that is sold separately.

2. 5” tool port 2 pack: move suction from tool to tool like never before! One end fits snug on any tool with a 2-1/2" dust port, the other connects tool-free to the Dust Right Handle which attaches to a 4" dust collector hose and ultimately your dust collector.

Flexible rubber boot: the dust collection port features a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool's dust port. Premium quality: our dust collector accessories are made with ABS plastic that is tough and wear-resistant, has anti-clogging properties, and rugged strength for long-term durability.
BrandRockler #ad
ManufacturerROCKLER #ad

4. Rockler


Black, Rockler 359055 Lathe Dust Collection System D x L: 3" x 9"

Rockler #ad - Scoop size 228 x 70 mm 9" x 2-3/4" dia. Adjustable steel boom arm with 228 mm 9" polymer dust scoop. Flexible hose attaches to dust port without clamps. 380 mm 15" vertical mounting post and 380 mm 15" adjustable connection plate. Collects shavings and dust from spindle turning projects.
BrandRockler #ad
ManufacturerRockler #ad
Height0.15 Inches
Length0.1 Inches
Weight5.93 Pounds
Width0.07 Inches
Part Number359055

5. Rockler


Translucent Blue Dust Collector Hose, Rockler 4” Dust Collection Hose, Polymer Dust Collectors for Woodworking Stretch up to 7X L, Expandable Hose Made w/ Elastic, 4’ L Extends to 14’ L, Flexible

Rockler #ad - After finishing your work, hang our dust extractor hose on our Dust Right Hose Storage Rack #22030, sold separately helps compress our Dust Right Expandable Hose and holds it in place with magnets for fast, space-saving storage.

Ideal for small shops: our dust hose is ideal for use in small shops, and with small dust collectors where a single hose is swapped among multiple machines and cleaning implements. Blue translucent color: this improved dust collector hose 4 inch weighs 30% less than previous versions, and is offered in blue translucent color. 4 inch dust collection hose: this incredibly stretchy 4”' diameter dust collection system hose reaches to the far corners of your workspace up to 14ft, then collapses into a compact stack for storage down to 2ft.

Stretches up to 14 feet! rockler dust collection expandable hoses are made of an elastic, flexible polymer material that can stretch up to 7X its original length for convenient cleanup in distant corners or attach to a power tool. Convenient to store after use: this dust collection hose 4 inch is easy to extend to a shop vac.
BrandRockler #ad
ManufacturerRockler #ad

6. Fulton Woodworking Tools


4" x 50’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

Fulton Woodworking Tools #ad - Pvc hose depending on diameter can be used with dust collectors, industrial vacuum systems, shop vacuums, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses.

When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, but it must be durable, flexible and sturdy enough, piping or hose to use can be challenging. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose.

The hose has a compression ratio of 3: 1. The hose temperature range is -20° F to 165° F which is ideal for indoor use like in a woodworking or workshop environment. Dust collection hoses need to be not only long enough, so it won’t completely collapse in use. This pvc hose checks all of those boxes and more! While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes.
BrandFulton Woodworking Tools #ad
ManufacturerPeachtree Woodworking Supply Inc #ad
Height10 Inches
Length24 Inches
Width20 Inches
Part Number377



O'SKOOL 4-Inch Dust Collector Fitting Vacuum Tool Port Adapter

O'SKOOL #ad - Rubber boot ensures tight fit, even variations in port size. Durable abs plastic end 4. 15" od, 4" id is suited for ID 4. 15 inch dust collection fitting and vacuum hoses. Includes: 4" tool portsx 1; 4'' Steel Hose Clamp x 1. Rubber boot 4" id inside diameter and a hose clamp fit a 4" OD outside diameter power tool port. Abs plastic port is tough and wear-resistant, which can extend the use time.
BrandO'SKOOL #ad
ManufacturerO'skool #ad
Part NumberDC04



POWERTEC 70108 4 Inch Blast Gate for Dust Collector/Vacuum Fittings

POWERTEC #ad - Specifications: accepts 4” id dust hose, port or vacuum fitting; 4" Nominal end measures 3-61/64” O. D. Function: maximizes the efficiency of your dust collection system by directing and regulating the air flow from one machine to another.

If connecting to a 4” oD port, a Flex Cuff or similar device will be required. Includes: 4” blast gate; both ends have 4” od outlet diameters and are designed to work with 4” ID dust hoses or other 4” ID ports. Compatibility: will not connect directly to other 4” od ports; please confirm that the actual listed size fits your application before ordering. Quality: made with premium black abs plastic, this unit was designed for durability and is abrasion resistant - able to withstand daily wear & tear from dirt, sawdust and woodchips. And 3-3/4” I. D.
ManufacturerPOWERTEC #ad
Height3.5 Inches
Length6.6 Inches
Weight0.35 Pounds
Width6.5 Inches
Part Number70108

9. Cen-Tec Systems


Cen-Tec Systems 95237 Quick Click Expanded Multi-Brand Power Tool Adapter Set for Dust Collection, Black

Cen-Tec Systems #ad - Compatible with the following cen-tec adapters and hoses 94511, 95204, 94434, 95193, 94522, 95215. Set is antistatic, providing a shock free environment to grounded vacuums and hoses. Designed to fit most major brands of power tools and work shrouds including Skill Bosch, Makita, Hitachi, Fein, Dewalt, Porter Cable, Ryobi, Cobalt, Festool, and Milwaukee Electric.

The soft tpe of the fitting allows the fitting to form to the shape of the exhaust port off of the selected power tool. Adapter set is only compatible with 1-1/4" threaded crushproof hose is not compatible with included blow molded hose that ships standard with most brands of shop vacuums. Expanded adapter set includes 3/4" 1" 1-1/4" 1-1/2" Power Tool shroud fittings. Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools.

A collar with clip ring and bayonet fittings with ¾” 1” 1-1/4” 1-½” soft tpe fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool.
BrandCen-Tec Systems #ad
ManufacturerCen-Tec Systems #ad
Height4 Inches
Length8 Inches
Width6 Inches
Part Number95237

10. Peachtree Woodworking Supply


4 inch Dust Separator Cyclone Dust Collector Kit for Use with Barrels Trash Cans Buckets or Custom Built Containers

Peachtree Woodworking Supply #ad - There’s no doubt about it, large cyclone dust collector systems are great! their value to larger and industrial or commercial workshop settings is immeasurable. This means you can use the cyclone separator with your planer, jointer or router tables without having to empty the bag or vacuum containers nearly as often.

This will ad years to the life of your dust collector and help keep your bag emptying chores to a minimum. Hardware pack and 2 ea. This cyclone kit will help protect your dust collector from unnecessary wear and tear. What about the rest of us with garage size workshops who don’t want the noise, space consumption or simply the large cost of such a system in their home workshop? The 4” Dust Separator Cyclone Kit is the perfect and economical solution for the everyday woodworker with a smaller to midsize workshop. Hose, barrel or container are NOT included. The working theory behind cyclone separators is that the heavier wood chips fall to the bottom of the container while the lighter dust particles get pulled in the out feed port and into your dust collector or vacuum.

This also helps prevents any unnecessary damage to dust collector impellers. The 4” separator cyclone kit comes with 2 ea. Once installed on a barrel, this dust and debris separator keeps the larger, box, or any container barrel or box not included, heavier chips coming from you machinery from getting into your dust collector impeller.4" ports for top side of separator 2 ea.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Weight1.61 Pounds
Part Number530