Top 10 Register Cover 8×8 – Registers, Grilles & Vents

As an Amazon Associate I earn from qualifying purchases.

1. Accord Ventilation

 #ad

Accord ABSWWH488 Sidewall/Ceiling Register with 4-Way Design, 8-Inch x 8-InchDuct Opening Measurements, White

#ad
Accord Ventilation #ad - Four-way air deflection with a multi-shutter damper. Steel construction for sidewall or ceiling application. The number of louvered columns and mounting holes will vary based on the size of the grille ordered. 1/2-in spaced fins. Listed product sizes refer to the duct opening measurements, not the register itself.
BrandAccord Ventilation #ad
ManufacturerAccord #ad
Height1.4 Inches
Length9.57 Inches
Weight1.9 Pounds
Width9.57 Inches
Part NumberABSWWH488
ModelABSWWH488

2. HVAC Premium

 #ad

White, High Airflow, Grille Register, Vent Duct Cover, 8"w x 8"h 2-Way AIR Supply Diffuser, Sidewall or Cieling

#ad
HVAC Premium #ad - Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Louvered supply grille for sidewall or ceiling application with SmoothGlide Technology, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet Lever.

8"w x 8"h is the size for the duct opening measurement only actual front end frame outer dimensions are 9. 75"w x 9. 75"h - see below in description how to measure a grillE. High quality solid stamped steel construction, 2 recessed screw Holes On Each Side with Screws Included, No Sharp Edges, no scuff powder coat durable Finish, EASY INSTALLATION. Easy unrestricted air flow deflection For Your HVAC System - 1/2 Inch Spaced Fins.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFSCR88W2

3. BUILDMART

 #ad

Register Grille for Ceiling, Walls & Floors, Decorative White Air Vent, Standard Linear Slot Diffuser, 8x8 Modern AC Vent Cover, Texas Buildmart

#ad
BUILDMART #ad - Cfm: 218 ft3/min - effective velocity: 9. 8 ft/s; neck: 7 5/8" x 7 5/8" - face: 9 13/16" x 9 13/16" the neck is the section that goes into the vent hole while the face is what will actually cover.

This model can be used as a supply vent cover and return vent cover - This is a non-filter model. Our vents are perfect for bathrooms, kitchens, and living rooms and can be used to update your office setting or commercial space. Update any room with our modern ac vent covers. This is a design and utility patent pending product* We make all sizes from 6x4 to 30x24 standard sized modern ac vent covers for the modern day home.

Commercial grade solid aluminum with modern architectural design for ceilings, walls, and floors. Use our modern ac vents covers for your office essentials, home improvement, or remodels. Adds value to any wall, ceiling & floor space by updating not only the look but also the feel.
BrandBUILDMART #ad
ManufacturerTexas Buildmart #ad
Height2 Inches
Length10 Inches
Width10 Inches
Part Number8x8

4. HVAC Premium

 #ad

White Outer Dimensions: 9.75"w X 9.75"h, HVAC Duct Cover, Sidewall and Ceiling, 8"w X 8"h Steel Return Air Grilles

#ad
HVAC Premium #ad - 8"w x 8"h is the size for the duct opening measurement only, actual front end outer dimensions are 9. 75" width x "w X 9. 75" height - see below in description how to measure a gRILLE. Looks like It Was Just Waxed. Easy unrestricted air flow for Your HVAC System - 50° angled to provide maximum airflow. Powder-coat finish - smooth, Shiny, scratch-Resistant, Beautiful. High quality solid stamped steel with Counter-Sunk Screw Holes Screws Included and No Sharp Edges. Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment.
BrandHVAC Premium #ad
ManufacturerHVAC Premium #ad
Part NumberMFRG88W
ModelCECOMINOD051740

5. HBW

 #ad

HBW 8"x 8" Duct Opening Size 3-Way Stamped Face Steel Ceiling/sidewall Air Supply Register, Vent Cover, Actual Outside Dimension 9.75" X 9.75"

#ad
HBW #ad - Stamped face steel construction with 1/2" fin spacing for high air flow. Multi-shutter damper with easy handle to adjust desired amount of air flow. Three way air Flow deflection Design. Individually shrink wrapped with card board pad in the back for extra protection. The listed size 8"x 8" is for inside duct opening measurement, actual outside surface dimension is 9. 75" x 9. 75".
BrandHBW #ad
ManufacturerHBW #ad

6. HBW

 #ad

Actual Outside Dimension 9.75" X 9.75", HBW 8"x 8" Duct Opening Size 4-Way Stamped Face Steel Ceiling/sidewall Air Supply Register, Vent Cover

#ad
HBW #ad - Multi-shutter damper with easy handle to adjust desired amount of air flow. Four way air Flow deflection Design. Stamped face steel construction with 1/2" fin spacing for high air flow. Individually shrink wrapped with card board pad in the back for extra protection. The listed size 8"x 8" is for inside duct opening measurement, actual outside dimension is 9. 75" x 9. 75".
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length9.75 Inches
Width9.75 Inches

7. AIR FLOW DECOR

 #ad

Air Flow Decor 8x8 HVAC Vent Cover Sidewall/Ceiling Adjustable Register, Outside Dimensions: 9.75"w X 9.75"h

#ad
AIR FLOW DECOR #ad - Air flow decor 8x8 hvac vent cover sidewall/ceiling Adjustable Register, Outside Dimensions: 9. 75"w x 9. 75"h. Heavy duty steel with durable white powder coating. All grilles comes with 1/4" phillips head white head screws. Carefully shrink wrapped With Cardboard Backing To Prevent Damage In Shipment. Measure the wall/ceiling open to determine which size grille you should be ordering.
BrandAIR FLOW DECOR #ad
ManufacturerAir Flow Decor #ad
Height0.5 Inches
Length9.75 Inches
Weight1.25 Pounds
Width9.75 Inches
Part NumberAFD88SCRA

8. EZ-FLO

 #ad

8 inch W x 4 inch H Opening, White Three-Way Sidewall/Ceiling Register, EZ-FLO 61658, 8 in. x 4

#ad
EZ-FLO #ad - Functionality: this register vent cover is designed to improve air ventilation in HVAC systems, and features an adjustable damper to easily control air flow.

Durable: ceiling and sidewall vent is composed of heavy duty steel with a white powder-coated finish which is flake resistant and provides a longer-lasting performance. Easy to install: vent cover registers are easy to install, and includes 2 screws for installation. Compatibility: vent covers are designed for use in both sidewall and ceiling locations. Side wall and ceiling vent: air vent deflector features a grille opening which measures 8 x 4 inches WxL, and an outer dimension of 9-3/4 inch x 5-3/4 inches WxL; features 3 vent rows.
BrandEZ-FLO #ad
ManufacturerEZ-FLO #ad
Height1 Inches
Length9.75 Inches
Weight1 Pounds
Width5.75 Inches
Part Number61658
Model61658
Warranty1 year limited

9. HBW

 #ad

Four-Way Plastic Side Wall/Ceiling Register in White 8"w X 8"h for Duct Opening Outside Dimension is 10"w X 10"h

#ad
HBW #ad - All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture. The listed size 8"x 8" is for inside duct opening measurement, actual outside dimension is 10" X 10". Two screw holes on each side with distance of 9" and two screws are included. Multi-shutter damper with easy handle to adjust desired amount of air flow. Four way air deflection design with bright white face and black damper in the back.
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length9.75 Inches
Width9.75 Inches

10. HBW

 #ad

Three-Way Plastic Side Wall/Ceiling Register in White 10"w X 8"h for Duct Opening Outside Dimension is 12"w X 10"h

#ad
HBW #ad - Three way air deflection design with bright white face and black damper in the back. The listed size 10"x 8" is for inside duct opening measurement, actual outside dimension is 12" X 10". Multi-shutter damper with easy handle to adjust desired amount of air flow. All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture. Two screw holes on each side with two screws included.
BrandHBW #ad
ManufacturerHBW #ad
Height1.5 Inches
Length12 Inches
Width10 Inches

Tags: