As an Amazon Associate I earn from qualifying purchases.
MOONWELL #ad - Made of manganese steel that is tough and durable. Pro pull bar for vinyl plank, laminate and hardwood flooring installation. For use with a mallet. Used to pull planks together of tongue and groove. The short end is thinner than usual pull bars to fit tight spaces against a wall.
Poweka #ad - Upgrade size：12. 2 inch /310mm long, 4mm thick upgraded pull bar is more longger and thicker than the normal design. The normal design are usually only 3 mm thick, 105 inch long and easily deformed.
Good fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
Bullet Tools #ad - Heavy duty 1/4" plate steel construction means this may just be the last one you buy. Closes gaps when installing laminate and hardwood. Black powder coat. Fully felted bottom to protect your floor. 17 inches long.
WorkPro #ad - Enhanced pull bar: made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch. The handle is made of American hickory which is lightweight but tough.
The double-faced solid PVC head delivers a softened, positive strike. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS.
The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable. The mallet head is 1-3/8 inch in diameter. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. The soft pads on the back can well protect the floor from scratch.
Poweka #ad - Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Built with a thick 079in, premium steel construction and possesses an attractive powder coating protective finish.
Package includes: 1*flooring Installation Pull Bar 104 in /265mm long. Specs: the pair of precision formed lips are measured at 039in high to fit between the wall or end of the board and 09in high to strike with a mallet.
POWERTEC #ad - Includes: 1 flooring pull Bar 16-1/4” long. Flange specs: the pair of precision formed lips are measured at 5/8” high to fit between the wall or end of the board and 1-5/16” high to strike with a mallet.
Non-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Heavy duty: built with a thick 7/32”, premium steel construction and possesses an attractive powder coating protective finish.
Ziqi #ad - Perfect fit: laminate pull bar suitable for 027in 7mm - 059in 15mm hardwood flooring, Laminate Flooring & Vinyl Plank Flooring. Quick and efficient: install your new laminate or hardwood flooring quickly, efficiently and accurately; Laminate pull bar ideal for domestic and professional use with high quality.
Function: commonly used for laminate flooring, tongue-and-groove, this installation tool allows you to work in tight spaces or close to the wall, or wood flooring, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
Non-marring: laminate wood flooring installation kit features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Enhanced flooring pull bar: Made from Solid steel constructions with matt coating, the pull bar kit designed with enhanced strength and corrosion resistance.
Big Max Tool Works #ad - P> applicable to all types of Tongue and Groove flooring. P>. P> prevents marring of the edges of the planks. P>. P> backed by 47 years of experience in manufacturing floor installation tools. P>. P> felt pads to protect floor finish. P>. P> long lasting and durable. P>.
CRAIN #ad - 3/16" heavy gauge Steel Design. Felt pads on its Underside To Prevent Scratching. 3" wide design protects flooring / 14 1/2" Length Of Working Room When Used Near The Wall.
1. MOONWELL
#adMOONWELL Pull Bar for Laminate Plank and Wood Flooring Installation 13 inch
#adMore information #ad
| Brand | MOONWELL #ad |
| Manufacturer | MOONWELL #ad |
| Height | 1.38 Inches |
| Length | 12.99 Inches |
| Width | 1.97 Inches |
| Part Number | TH008 |
More information #ad
2. Poweka
#adHeavy Duty Pull bar for Vinyl Plank Flooring and Laminate Wood Flooring Installation Tool,12.2 inch Long
#adGood fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
More information #ad
Enhanced pull bar：made from premium a3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The soft pads on the back can well protect the floor from scratch. Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation. Fit for：suitable for 027in 7mm - 06in 15mm laminate or hardwood flooring.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
More information #ad
3. Bullet Tools
#adBullet Tools, 712HD Professional Heavy Duty Pull Bar and Pry Bar for Hard Flooring Installation
#adMore information #ad
| Brand | Bullet Tools #ad |
| Manufacturer | bullet tools #ad |
| Height | 1 Inches |
| Length | 1 Inches |
| Width | 1 Inches |
| Part Number | 712HD |
| Model | 712HD |
| Warranty | 30-Day Satisfaction Guarantee |
More information #ad
4. Norske
#adNorske Tools NMAP007 Heavy Duty Pull and Pry Bar for Laminate and Hardwood flooring installation
#adNorske #ad - Solid steel construction, built tough for heavy duty use. Designed to close gaps and seams in hardwood, engineered and laminated floors without causing damage. Package height: 5. 5 inches. Item package weight: 4. 3 pounds.More information #ad
| Brand | Norske #ad |
| Manufacturer | Norske Tools Ltd #ad |
| Weight | 4.3 Pounds |
| Part Number | NMAP007 |
| Model | NMAP007 |
More information #ad
5. WorkPro
#adTapping Block and 30-Piece Spacers Included, WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Heavy Duty Pull Bar
#adThe double-faced solid PVC head delivers a softened, positive strike. 30-piece spacers: the kit comes with 30 pieces plastic spacers which are designed with non-slip slots. Reinforced mallet: constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS.
More information #ad
The whole mallet is 10-3/4 inch long and weighs 1. 036lb. You are always welcomed to contact us for warranty service whenever there is any problem with the product. The approximate size of the spacer 2-3/8 x 1-1/8 inch. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. Solid tapping block: the tapping block made from polypropylene is designed solid, which is more sturdy and durable. The mallet head is 1-3/8 inch in diameter. The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. The soft pads on the back can well protect the floor from scratch.
| Brand | WorkPro #ad |
| Manufacturer | HANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad |
More information #ad
6. Poweka
#ad1, Vinyl Plank Flooring and Wood Flooring Installation Tool（10.4in 10.4inch, 265mm Pull Bar for Laminate Plank
#adPackage includes: 1*flooring Installation Pull Bar 104 in /265mm long. Specs: the pair of precision formed lips are measured at 039in high to fit between the wall or end of the board and 09in high to strike with a mallet.
More information #ad
Fuction:this flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks. Perfect design :pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation.| Brand | Poweka #ad |
| Manufacturer | Poweka #ad |
| Part Number | pk |
More information #ad
7. POWERTEC
#adPOWERTEC 71479 Pro Pull Bar for Laminate Flooring
#adNon-marring: features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Heavy duty: built with a thick 7/32”, premium steel construction and possesses an attractive powder coating protective finish.
More information #ad
Function: commonly used for laminate, tongue-and-groove, or wood flooring, this installation tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1.8 Inches |
| Length | 16.7 Inches |
| Width | 3.25 Inches |
| Part Number | 71479 |
| Model | 71479 |
More information #ad
8. Ziqi
#adManganese Steel Heavy Duty Laminate Flooring Pull Bar for Laminate Plank and Wood Flooring Installation Pull Bar KitBlack, ZIQI 13 Inch Laminate Wood Flooring Installation Kit
#adFunction: commonly used for laminate flooring, tongue-and-groove, this installation tool allows you to work in tight spaces or close to the wall, or wood flooring, closing the gaps and seams in laminate floors without causing damage – Perfect alternative to tapping blocks.
More information #ad
Non-marring: laminate wood flooring installation kit features a pair of soft, non-abrasive felt backing pads on both ends to protect the finish of the floor at the time of install. Enhanced flooring pull bar: Made from Solid steel constructions with matt coating, the pull bar kit designed with enhanced strength and corrosion resistance.
| Brand | Ziqi #ad |
| Manufacturer | Ziqi #ad |
| Part Number | ZQUS-WoodFlooring-1PCS-BLACK-201225 |
More information #ad
9. Big Max Tool Works
#adUSA Carpentry Tool w- 47 Years’ Experience! A Must Have Flooring Pull Bar for Hardwood, Vinyl Plank, and All Brands of Laminate Flooring, Big Max Pro Pull Bar w- Square Striking Head
#adMore information #ad
| Brand | Big Max Tool Works #ad |
| Manufacturer | Big Max Tool Works #ad |
| Height | 1.75 Inches |
| Length | 12.5 Inches |
| Weight | 2 Pounds |
| Width | 3 Inches |
More information #ad
10. CRAIN
#adCrain Knucklehead Pull Bar
#adMore information #ad
Can be used on hardwood flooring, Laminate Flooring & Vinyl Plank Flooring. Unique designed Boxed "Knuckle-Shaped" Hammering Head.| Brand | CRAIN #ad |
| Manufacturer | CRAIN #ad |
| Height | 0.04 Inches |
| Length | 15.75 Inches |
| Width | 2.76 Inches |
| Part Number | No 560 |
| Model | No 560 |
More information #ad
