As an Amazon Associate I earn from qualifying purchases.
Kit includes: 2 55” guide rails and 2 track saw guide rail connectors. Additionally, such as routers. Plus you can easily customize length using the powertec saw guide rail connector kit, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, or fits Makita connector or Festool Connector for longer cuts.

Optimal utility: 24 inches long superior straightness - laser measured right to left, spaced 3/4” apart on center, 3/4” thick and 3 inches high.

Includes: 1 table saw miter gauge, 1 Multi-track Miter Fence, 1 T-Track Flip Stop. High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 30° and 45° and nine others, 22½°, 10°, both left and right.

Premium quality: constructed out of heavy duty material and paired with non-marring pressure pads, these clamps were built for long-term durability, able to hold a tight grip without slippage for years to come.
Please note; they will not work with Universal or ¼” style t-tracks. Versatile: these track saw clamps, a universal design that works perfectly with powertec track saw guides. They are fully compatible with Dewalt style guides, with a clamp bar of. 430” x. 200”, possess, and also work along with other major brands such as the Makita and Festool rails or 3/8” or Heavy Duty T-Tracks.

Includes: 1 splinter Guard Replacement Strip, 118-inch roll. Compatibility: works with powertec, but is also a great alternative for Makita guide rail system, Festool, Dewalt and others.

Includes: 1 protective guide rail bag | 60 inch long by 9 inch wide | Black. Double protection: flaunts dual-sided padded protection for a set of rails, along with individual straps to hold and secure each rail. Environmental safeguard: constructed out of anti-tear, water resistant and weatherproof material for every season and all occasions.

Compatibility: connectors are. 467” x. 235” x 11-3/4” and will work with any track saw guide with a compatible sized slot. Easy to install: no instructions required; comes complete with a 3mm allen key and 4 set screws to prevent over-tightening.


Includes: 1 t-track flip fence Stop 3 inches with 5/16" T-Bolt. Build: possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use.
Features: a user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1" dia knob.

They will not work in universal or ¼” t-track.
Please note: the clamp ends have a specific profile, see the image for details. They are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Please check the size of your t-track to verify that the clamps will work for your application. Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
1. POWERTEC
#ad
POWERTEC 71387 55" Guide Rail Joining Set for Makita or Festool Track Saws | Includes 2 Aluminum Extruded Guided Rails and 2 Guide Rail Connectors for Woodworking Projects
#adPOWERTEC #ad - Compatibility: the 55” guide rails is compatible with Makita plunge saw and Festool track saws. Premium quality: made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.Kit includes: 2 55” guide rails and 2 track saw guide rail connectors. Additionally, such as routers. Plus you can easily customize length using the powertec saw guide rail connector kit, this handy track saw tool can be used with the guide rail adapters and other rail guide devices to extend its compatibility to a wider range of machines, or fits Makita connector or Festool Connector for longer cuts.
More information #ad
Function: this exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 3.54 Inches |
Length | 61.02 Inches |
Width | 9.45 Inches |
Part Number | 71387 |
Model | 71387 |
More information #ad
2. POWERTEC
#ad
POWERTEC 71488 Aluminum Multi T-Track Fence with Laser Measure Right to Left, 3” High x 24" Long Multi Track
#adPOWERTEC #ad - Includes: 1 multi T Track Fence 24 inch. Universal: part of our exclusive multi-track system, this multi-functional item accepts the most common accessory fasteners 1/4” T-bolts, 5/16” T-bolts and 1/4” hex bolts.Optimal utility: 24 inches long superior straightness - laser measured right to left, spaced 3/4” apart on center, 3/4” thick and 3 inches high.
More information #ad
Premium grade: good quality tracks made with corrosion resistant extruded aluminum for strength and long-term durability. Function: this multi-t track can be used for a wide assortment of woodworking projects, including creating general fixtures and jigs, workstations or customized fences router, drill press and miter gauge.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 3 Inches |
Length | 24.1 Inches |
Width | 0.8 Inches |
Part Number | 71488 |
Model | 71488 |
More information #ad
3. POWERTEC
#ad
POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” multi –track fence with 27 Angle Stops
#adPOWERTEC #ad - Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts including cross cutting while guaranteeing quick and accurate project results.Includes: 1 table saw miter gauge, 1 Multi-track Miter Fence, 1 T-Track Flip Stop. High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 30° and 45° and nine others, 22½°, 10°, both left and right.
More information #ad
Multi-track miter fence: smooth, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex bots, laser engraved scale, 1/4” t-bolts and 5/16” t- bolts. Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 25 Inches |
Length | 4.62 Inches |
Width | 3.37 Inches |
Part Number | 71391 |
Model | 71391 |
More information #ad
4. POWERTEC
#ad
POWERTEC 71423 Tracksaw Bar Clamps, 8-3/4 Inch – 2 Pack
#adPOWERTEC #ad - Includes: 2 track Saw Track Clamps. Easy to use: features squeeze grip triggers for single-handed operation with optimal support, without limiting the position of the workpiece. Applications: a multi-functional and highly resourceful tool commonly used as an integral part of track saw cutting systems, working most effectively with T-Tracks, in guide rail channels, or top channels as a stop.Premium quality: constructed out of heavy duty material and paired with non-marring pressure pads, these clamps were built for long-term durability, able to hold a tight grip without slippage for years to come.
More information #ad
Please note; they will not work with Universal or ¼” style t-tracks. Versatile: these track saw clamps, a universal design that works perfectly with powertec track saw guides. They are fully compatible with Dewalt style guides, with a clamp bar of. 430” x. 200”, possess, and also work along with other major brands such as the Makita and Festool rails or 3/8” or Heavy Duty T-Tracks.
Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 1.5 Inches |
Length | 13.5 Inches |
Weight | 1.92 Pounds |
Width | 7.8 Inches |
Part Number | 71423 |
Model | 71423 |
More information #ad
5. POWERTEC
#ad
POWERTEC 71656 Splinter Guard Replacement Strip for 118” Guide Rails
#adPOWERTEC #ad - Function: acts as a zero tolerance insert, consistent, preventing your work material from splintering – helps deliver smooth, high precision results from your track saw cutting system.Includes: 1 splinter Guard Replacement Strip, 118-inch roll. Compatibility: works with powertec, but is also a great alternative for Makita guide rail system, Festool, Dewalt and others.
More information #ad
Premium build: made with thick 0074”, high quality rubber for durability to ensure long lasting effectiveness and functionality. Easy to use: the self-adhesive backing allows for an easy attachment, so that you can simply peal and stick when it’s time to replace your old one.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 0.74 Inches |
Length | 118 Inches |
Width | 0.9 Inches |
Part Number | 71656 |
Model | 71656 |
More information #ad
6. POWERTEC
#ad
And DEWALT | W/ Dual-Sided Padding For Secure Rail Placement, Makita, POWERTEC 71411 60" Premium Guide Rail Bag for Festool
#adPOWERTEC #ad - Function: delivers a safe and maximal protection solution to securing your powertec guide rails/ tracks/ Clamps/ connectors for work shop storage or while traveling to a jobsite.Includes: 1 protective guide rail bag | 60 inch long by 9 inch wide | Black. Double protection: flaunts dual-sided padded protection for a set of rails, along with individual straps to hold and secure each rail. Environmental safeguard: constructed out of anti-tear, water resistant and weatherproof material for every season and all occasions.
More information #ad
Premium features: this track saw guide rail bag is super durable, Comes equipped with a high quality zipper, ergonomic handle, heavy duty shoulder strap, and pockets for additional storage. It's universal design is compatible with 55" powerteC guide rails, DEWALT, Festool, Makita, and other 55" and 59" guide rail tracks.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 3 Inches |
Length | 20 Inches |
Width | 9 Inches |
Part Number | 71411 |
Model | 71411 |
More information #ad
7. POWERTEC
#ad
And Triton | Premium Series | Pack of 2, POWERTEC 71358 Guide Rail Connector Set for Festool, DeWalt, Makita
#adPOWERTEC #ad - Designed with an easy to install construction, it’s perfectly suited for an assortment of woodworking applications using guide rails and templates from Festool, Makita, DeWalt, and Triton.Compatibility: connectors are. 467” x. 235” x 11-3/4” and will work with any track saw guide with a compatible sized slot. Easy to install: no instructions required; comes complete with a 3mm allen key and 4 set screws to prevent over-tightening.
More information #ad
Premium quality: made with high quality steel, providing a solid and sturdy joint between rails as you get consistent straight cuts moving the saw past the connection points. Complete package: connector kit has everything you need to align and connect a pair of guide rails. Includes: 2 guide rail Connectors and 1 3mm Allen Key.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 0.55 Inches |
Length | 12.7 Inches |
Width | 1.75 Inches |
Part Number | 71358 |
Model | 71358 |
More information #ad
8. POWERTEC
#ad
POWERTEC 71505 55” Guide Rail Joining Set for DeWalt Track Saws | Includes 2 Aluminum Extruded Guided Rails and 1 Guide Rail Connector for Woodworking Projects
#adPOWERTEC #ad - Kit includes: 2 55” guide rails and 1 Track Saw Guide Rail Connectors. Compatibility: the 55” guide rails compatible with DeWalt Track Saws. Premium quality: made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.More information #ad
Function: this exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 2.6 Inches |
Length | 58 Inches |
Width | 8.25 Inches |
Part Number | 71505 |
Model | 71505 |
More information #ad
9. POWERTEC
#ad
POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking
#adPOWERTEC #ad - The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body. Function: creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring.Includes: 1 t-track flip fence Stop 3 inches with 5/16" T-Bolt. Build: possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use.
More information #ad
Universal: works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task without the need for changing settings. Features: a user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1" dia knob.
Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 1.5 Inches |
Length | 6.5 Inches |
Width | 4.5 Inches |
Part Number | 71367 |
Model | 71367 |
More information #ad
10. POWERTEC
#ad
POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System, 5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack
#adPOWERTEC #ad - Superior clamping force: delivers consistently secure placement and safe Clamp action for a seamless workflow. Versatility: these rail clamps provide a portable clamping option for festool, perfect as MFT clamps for your homemade workbench, Makita, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, and fits in some heavy duty T-slots see image for size.They will not work in universal or ¼” t-track.
More information #ad
Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic. Please note: the clamp ends have a specific profile, see the image for details. They are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Please check the size of your t-track to verify that the clamps will work for your application. Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth.
Brand | POWERTEC #ad |
Manufacturer | POWERTEC #ad |
Height | 1 Inches |
Length | 7.5 Inches |
Width | 4.5 Inches |
Part Number | 71410 |
Model | 71410 |
More information #ad