Top 10 NPT Tap and Drill Set – Pipe Taps

As an Amazon Associate I earn from qualifying purchases.

1. Drill America

#ad

POU1/2NPTW/DRILL 1/2" Carbon Steel NPT Pipe Tap and 23/32" High Speed Steel Drill Bit Set, POU Series, Drill America

#ad
Drill America #ad - Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam pipe threads. Black oxide drill bit is ideal for production, maintenance or portable drilling jobs. Set contains matching NPT pipe tap and high speed steel drill bit. 1/2" carbon steel npt tap and 23/32" HSS drill bit with 1/2" Shank. Set comes in plastic pouch.
BrandDrill America #ad
ManufacturerDrill America #ad
Part NumberPOU1/2NPTW/DRILL
ModelPOU1/2NPTW/DRILL

2. Drill America

#ad

Drill America, DWTPT1/8-1SET 6 Piece NPT Pipe Tap, 1/4", 3/4" and 1" in Wooden Case, Carbon Steel, 1/8", 3/8", DWTPT Series Set, 1/2"

#ad
Drill America #ad - 6 piece set of carbon steel npt pipe taps, sizes 1/8", 1/4", 1/2", 3/8", 3/4" and 1" in Wood Case. Also called 'pipe taps', national Pipe Taper NPT taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous. All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. The thread tapers 3/4 of an inch per foot. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap.
BrandDrill America #ad
ManufacturerDrill America #ad
Height4 Inches
Length6 Inches
Width6 Inches
Part NumberDWTPT1/8-1SET
ModelDWTPT1/8-1SET

3. Drill America

#ad

Drill America, POUCSNPT5 5 Piece NPT Pipe Tap Set 1/8", 1/4", 3/8", Plastic Pouch Case, POU Series, 1/2" and 3/4"

#ad
Drill America #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

Carbon steel pipe taps are designed to clean and or re-thread damaged or Jam Pipe threads. Npt pipe taps, sizes 1/4"-18 npt, 1/2"-14 npt, 3/8"-18 npt, 3/4"-14 nPT carbon steel Pipe taps in plastic pouch case. Round shank with square end. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts.
BrandDrill America #ad
ManufacturerDrill America #ad
Part NumberPOUCSNPT5
ModelPOUCSNPT5

4. WMAZtool

#ad

High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads, 3/4", 1/4", 1/2", 5 Piece NPT Thread Forming Taps, Size 1/8", 3/8", Pipe Taps Set

#ad
WMAZtool #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Nominal size of the tap is that of the pipe fitting being tapped.

Round shank with square end, straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Different from the traditional carbon steel material. Includes teach size of: 1/8" - 27 npt, 1/2" - 14 npt, 3/8" - 18 npt, 1/4" - 18 npt, 3/4" - 14 npt. Ideal for pipe fittings. Available in national pipe Taper NPT and British Standard Pipe Taper BSP.

5 pcs npt pipe taps used for clean and or re-thread damaged or jam pipe threads, cuts internal threads in pipes. Our pipe taps is made of composite steel gcr15 material, the traditional hardness of 45# carbon steel is 44; the hardness of combined steel is 61, which is more durable and Higher hardness, uses forclean and or re-thread damaged or jam pipe threads.
BrandWMAZtool #ad
ManufacturerWM077 #ad

5. Drill America

#ad

Drill America DWTPT1/4-1-1/4SET 6 Piece NPT Pipe Tap Set in Wooden Case 1/4", 1" and 1-1/4", 3/4", 3/8", 1/2", DWT Series, Uncoated Bright, Carbon Steel, Small

#ad
Drill America #ad - All pipe taps furnished with a 2-1/2 to 3-1/2 thread chamfer. The thread tapers 3/4 of an inch per foot. 6 piece set of carbon steel npt pipe taps, 3/4", 1/2", 3/8", sizes /4", 1" and 1-1/4". The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads. Also called 'pipe taps', national Pipe Taper NPT taps are appropriate for threading a wide variety of materials both ferrous and non-ferrous.
BrandDrill America #ad
ManufacturerDrill America #ad
Part NumberDWTPT1/4-1-1/4SET
ModelDWTPT1/4-1-1/4SET

6. Drill America

#ad

DWT Series, High Speed Steel, 3/8", 3/4" and 1", 1/2", 1/4", Drill America, DWTHS1/8-1SET 6 Piece NPT Pipe Tap Set in Wooden Case 1/8"

#ad
Drill America #ad - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Round shank with square end. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts.
BrandDrill America #ad
ManufacturerDrill America #ad
Weight0.99 Pounds
Part NumberDWTHS1/8-1SET
ModelDWTHS1/8-1SET

7. AUTOTOOLHOME

#ad

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

#ad
AUTOTOOLHOME #ad - 6pcs drill tap set including sae- 6-32nc, 12-24nc, 10-32nc, 8-32nc, 10-24nc, 1/4-20nc. Storage case is lightweight and durable for easy storage and is portable for all job environments. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life.

Titanium combination drill taps are made of hss 4341, which can ensure sharp, fast execution and retain strength and efficiency. This tap set includes sae, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you.

The convenient ΒΌ-inch 6. 35mm quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. Three in one operation provides hole drilling, deburring and countersinking for a quick and complete job on copper, tapping, brass, aluminum, sheet metal and plastic.
BrandAUTOTOOLHOME #ad
ManufacturerJYC International Trade Co., Ltd. #ad
Part Number02426001

8. Drill America

#ad

Drill America DWTPT2INCH 2"-11-1/2 NPT Pipe Tap, Carbon Steel, DWTPT Series

#ad
Drill America #ad - Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shank with square end. Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads.
BrandDrill America #ad
ManufacturerDrill America #ad
Weight1 Pounds
Part NumberDWTPT2INCH
ModelDWTPT2INCH

9. Century Drill & Tool

#ad

Century Drill & Tool 93201 1/8-27 NPT Tap and 21/64" Drill Combo Pack

#ad
Century Drill & Tool #ad - Drill bit made of premium grade high speed steel. Tap and drill combo pack offers correct drill size for the tap in one convenient package. Tap designed for hand cutting applications. Tap offers precision cut threads, accurately formed for consistent, exact threading. Tap is heat treated and tempered for file hard threads, and longer, useful life.
BrandCentury Drill & Tool #ad
ManufacturerCentury Drill & Tool #ad
Height0.56 Inches
Length5 Inches
Weight0.07 Pounds
Width1.75 Inches
Part Number93201
Model93201

10. HORUSDY

#ad

1/4", 3/8", Sizes Includes 1/8", HORUSDY 5-Piece NPT Pipe Tap Set, 1/2" and 3/4"

#ad
HORUSDY #ad - Right-hand cutting tool has a clockwise cutting function. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts. Right-hand cutting tool has a clockwise cutting function. Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads. Equipped with special storage box. Npt pipe taps sizes includes:1/4"-18 npt, 1/2"-14 NPT, 3/8"-18 npt, 3/4"-14. Round shank, square end.
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height1.5 Inches
Length7 Inches
Width6 Inches
Part Number95207