As an Amazon Associate I earn from qualifying purchases.
Milescraft #ad - Package dimensions:3. 05"l x 5. 33"w x 14. 48"h. Centerlines ensure accurate alignment when drilling into various surfaces. The two product v-grooves allow for usage on corners and even cylindrical surfaces too.
SUNCONY #ad - Even novice will not fail. Multi-functional design can even quickly drill pin holes on shelves and install hinge plates in assembled or unassembled cabinets. The edges of all rulers and sliding drill guides are upgraded by chamfer, protect your hands and furniture surface, more smooth, no scratch.
The case-hardened steel bushings are engineered to last more than 10, comes with two extra bushings, extend service life extremely. Professional cabinet hardware jig：each part is precision machined to tolerances of ±00002” by cnc machine tools and calibrated to 00001” square.
Fast and simple to use: for professional carpenters, if you have done the left door, this tool can greatly improve the cabinet Handles installation speed while ensuring the accuracy of the hardware installation. Set it up once and use it repeatedly with no further measurements, just flip it over and it’s already easy setup for the right door. All aluminum alloy: every part of the cabinet hardware jig is made of forged aircraft-grade aluminum. All metal, no plastic.
Woodpeckers #ad - Building a custom work table. Replacing the top on something like a Festool MFT. You can mill the top with near-CNC accuracy with nothing fancier than a good router and a sharp bit.
TOURACE #ad - The quick-release Drill Guide Block makes set up simple. Jig is made of virtually indestructible aluminum and ABS plastic. High precision wide range of adjustment Easy to operate. The fastest and most accurate hardware tool on the market Install hardware 10x faster.
Milescraft #ad - Built in closed storage compartment for your bit and indexing pins. Self-centering brad point bit. Allows you to mark the locations for euro-style hinges. Custom spring-loaded-brad point drill bit allows the holes you drill to self-center with the holes on the main body.
MinliGUY #ad - 2 metal rulers can be perpendicular perfectly, inch & FRIENDLY TO DIYEREasy to assemble, built-in 2 scales, to find right spots for knob/handle/pull accurately & metric. Multi-purpose hardware installing templateour aluminum cabinet hardware jig is designed for precisely mounting of pull/knobs/handles at even height on doors/drawers/cabinets.
Package detail1 cabinet hardware template+ 2 drill bits 5mm&4mm+1 extra set of fittings10 small pieces to extend service life+1 instruction+1 zippered bag to storage.
Our cabinet hardware jig template is including enough fittings for this fixture for lifetime use. Accurate & high efficiently. The vertical bar & other parts are made of aluminum alloy. All metal cabinet hardware template10-inchh * 16-inchw, the level bar is made of hardened stainless steel. Default 3 drilling guide hole size is 5mm, with a second size 4. 2mm *3 guide hole.
Holimax #ad - Wide applicationour punch locator drill guide can be used for installing kitchen cabinet Handles, Door Handles, Drawers Pulls and Knobs, Window Lock and other Applications need Location and Drill. It's a good accessories Tools and Helper for Woodworker or DIY. Sold by holimax, and packed in a nice portable storage bag, buy with Confidence.
It can drill multiple cabinet Drawers or Door Handles Repeatedly to Ensure the Same Position. Easy to grasp and use, adjust the horizontal and Longitudinal Sliding Plates, Fix the Punch Locator, Safe and Reliable.
The scale is clearly visible, which is Convenient for Accurate Positioning of Handle Holes. Free gift & exquisite packing bagfree gift includes 5pcs 4. 5mm drill bills for your convenience. High quality materialcabinet handle jig, made of indestructible stainless Steel and High-Impact ABS Plastic Construction. Easy to useconfirm drilling distance and fix the punch sliding plate, punching, Installing the Handles and Finished.
King&Charles #ad - The quick-release Drill Guide Block makes set up simple. Jig widely application- cabinet hardware jig is ideal for installing kitchen drawers, Hinge, door handles and drawer fronts, cabinets, Or Shelf. Time saver quick drilling- cabinet hardware template tool a full day of measuring and re-measuring.
Works on any cabinet door stile and rails including shaker doors & recessed drawer fronts. Set it up once and use it repeatedly with no further measurements, A good accessory, and helper for woodwork or DIY.
Cabinet template hardware- it can be easily adjusted to any length you need to drill by adjusting the drill guide sliders. Robust build lightweight- unparalleled high-definition tick marks and the ruler is made from stainless steel. Ensure the jig’s premium durability, high corrosion resistance, high strength. The front-mounted clamp handle makes clamping easy.
POWERTEC #ad - Please note: the clamp ends have a specific profile, see the image for details. Superior clamping force: delivers consistently secure placement and safe Clamp action for a seamless workflow. Versatility: these rail clamps provide a portable clamping option for festool, Makita, perfect as MFT clamps for your homemade workbench, POWERTEC 71572/ 71573 track saw guide rails and similar sized track saw guides, and fits in some heavy duty T-slots see image for size.
They are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic.
1. Milescraft
#adMilescraft 1312 DrillBlock- Handheld Drill Guide
#adMore information #ad
Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces.| Brand | Milescraft #ad |
| Manufacturer | Milescraft Inc. #ad |
| Height | 1.25 Inches |
| Length | 8 Inches |
| Weight | 0.8 Pounds |
| Width | 2.75 Inches |
| Part Number | 13120103 |
| Model | 1312 |
More information #ad
2. SUNCONY
#adCabinet Hardware Jig All Aluminum Alloy,Adjustable Drill Guide Template Tool for Installation of Door Drawer Front Knobs Handles and Pulls
#adThe case-hardened steel bushings are engineered to last more than 10, comes with two extra bushings, extend service life extremely. Professional cabinet hardware jig：each part is precision machined to tolerances of ±00002” by cnc machine tools and calibrated to 00001” square.
More information #ad
This wood drilling template tool prevents costly mistakes and ensure perfect installation of hardware every time. Unlike cheap plastic components that break or quickly wear out, 000 holes. Perfect drilling：the tool must not only measure the hole to be drilled, but also ensure that the exact hole is drilled. Fast and simple to use: for professional carpenters, if you have done the left door, this tool can greatly improve the cabinet Handles installation speed while ensuring the accuracy of the hardware installation. Set it up once and use it repeatedly with no further measurements, just flip it over and it’s already easy setup for the right door. All aluminum alloy: every part of the cabinet hardware jig is made of forged aircraft-grade aluminum. All metal, no plastic.
| Brand | SUNCONY #ad |
| Manufacturer | SUNCONY #ad |
| Part Number | SC-CHJ-S-04 |
More information #ad
3. KREG
#adKreg ACS-TTOP Adaptive Cutting System Project Table Top
#adKREG #ad - Integrated measuring scales ensure accurate, repeatable cuts and simple setups. Mdf and aluminum table designed to support and position solid wood and plywood while cutting with the Kreg Adaptive Cutting System Plunge Saw and Guide Track.More information #ad
Large 55" x 29 3/4" surface supports plywood sheets and boards while cutting.| Brand | KREG #ad |
| Manufacturer | Kreg Tool Inc #ad |
| Height | 29 Inches |
| Length | 2 Inches |
| Weight | 57 Pounds |
| Width | 55 Inches |
| Part Number | ACS-TTOP |
| Model | ACS-TTOP |
More information #ad
4. Woodpeckers
#ad2019, Hole Boring Jig
#adMore information #ad
| Brand | Woodpeckers #ad |
| Manufacturer | Woodpeckers Inc. #ad |
More information #ad
5. TOURACE
#adTourace Cabinet Hardware Jig for Handles and Knobs Aluminum Alloy Drill Guide Sleeve Drawer Pull Wood Drilling Dowelling Tools Set Drawer Knob Pull Drilling Templates Jig Tool
#adMore information #ad
| Brand | TOURACE #ad |
| Manufacturer | TOURACE #ad |
| Part Number | Jig-001 |
More information #ad
6. Milescraft
#adMilescraft 1316 CabinetMate, Shelf Pin Drilling Jig
#adMore information #ad
Comes with the 1/4 in. Please review specifications to ensure this product will meet your project’s dimensional requirements Imperial or Metric Units.| Brand | Milescraft #ad |
| Manufacturer | Milescraft Inc. #ad |
| Height | 1.38 Inches |
| Length | 16.65 Inches |
| Weight | 1 pounds |
| Width | 7.13 Inches |
| Part Number | 1316 |
| Model | 1316 |
| Warranty | 1 year |
More information #ad
7. MinliGUY
#adWith Φ5mm & Φ4.2mm Drilling Hole, Inch & Metric2 Scale, Cabinet Hardware Jig All Metal, Aluminum Alloy Cabinet Hole Drilling Template for Knob/Handle/Pull. Extra 2 Drill Bits & 1 Set of Fittings
#adPackage detail1 cabinet hardware template+ 2 drill bits 5mm&4mm+1 extra set of fittings10 small pieces to extend service life+1 instruction+1 zippered bag to storage.
More information #ad
Easy to use & great longevityit's a template tool to help you install handle/knob/pull on cabinet/door/drawer at the right position, friendly to DIYers. Our cabinet hardware jig template is including enough fittings for this fixture for lifetime use. Accurate & high efficiently. The vertical bar & other parts are made of aluminum alloy. All metal cabinet hardware template10-inchh * 16-inchw, the level bar is made of hardened stainless steel. Default 3 drilling guide hole size is 5mm, with a second size 4. 2mm *3 guide hole.
| Brand | MinliGUY #ad |
| Manufacturer | MinliGUY #ad |
| Part Number | J1111 |
More information #ad
8. Holimax
#adHolimax Cabinet Hardware Jig, Punch Locator Drill Guide for Handle Knob Pull Installation of Door and Drawer woodworking tools, Cabinet Handle Jig, Cabinet Hardware Template Tool
#adIt can drill multiple cabinet Drawers or Door Handles Repeatedly to Ensure the Same Position. Easy to grasp and use, adjust the horizontal and Longitudinal Sliding Plates, Fix the Punch Locator, Safe and Reliable.
More information #ad
Save timecabinet hardware template saves a full day of measuring and re-measuring, set it up once and use it Repeatedly, for Precise Drilling and Positioning, no Marking or Clamping, every Installation takes only seconds. The drill guide cabinet hardware jig can be Detachable into small parts, our Honor to Serve for you, an Essential kit for matey measure tool for Cabinet Hardware. The scale is clearly visible, which is Convenient for Accurate Positioning of Handle Holes. Free gift & exquisite packing bagfree gift includes 5pcs 4. 5mm drill bills for your convenience. High quality materialcabinet handle jig, made of indestructible stainless Steel and High-Impact ABS Plastic Construction. Easy to useconfirm drilling distance and fix the punch sliding plate, punching, Installing the Handles and Finished.
| Brand | Holimax #ad |
| Manufacturer | Holimax #ad |
| Part Number | HP-008 |
More information #ad
9. King&Charles
#adCabinet Hardware Template Tool, King&Charles Cabinet Hardware Jig, Cabinet Handle Jig, Drawer Pull Jig, Cabinet Jig for Handles and Pulls
#adWorks on any cabinet door stile and rails including shaker doors & recessed drawer fronts. Set it up once and use it repeatedly with no further measurements, A good accessory, and helper for woodwork or DIY.
More information #ad
The storage bag we present will solve all your troubles of carrying. Detachable & portable- cabinet hardware installation template quick-release '' drill guide'' sliders can be split into small parts by taking a small Space to easily carry. Cabinet template hardware- it can be easily adjusted to any length you need to drill by adjusting the drill guide sliders. Robust build lightweight- unparalleled high-definition tick marks and the ruler is made from stainless steel. Ensure the jig’s premium durability, high corrosion resistance, high strength. The front-mounted clamp handle makes clamping easy.
| Brand | King&Charles #ad |
| Manufacturer | King&Charles #ad |
More information #ad
10. POWERTEC
#ad5-3/8” Capacity x 2-3/8” Throat Depth – 2 Pack, POWERTEC 71410 Quick Screw Guide Rail Clamp for MFT Table and Guide Rail System
#adMore information #ad
Please check the size of your t-track to verify that the clamps will work for your application. They will not work in universal or ¼” t-track. Includes: 2 quick screw down clamps with 5-3/8" Max opening, 2-3/8" Throat depth. They are designed to work with mft tables, the track saw guides listed and some heavy duty t-tracks with an opening of at least 9/32”. Premium design: features high quality and ergonomic plastic clamp handle grips for quick and comfortable tightening, without the splinters from cheap wood; The steel pressure pads are completed with removable non marring plastic.
| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 1 Inches |
| Length | 7.5 Inches |
| Width | 4.5 Inches |
| Part Number | 71410 |
| Model | 71410 |
More information #ad
