Top 10 L298n. Motor Driver Module – Electrical Motor Controls

As an Amazon Associate I earn from qualifying purchases.

1. Relkin

#ad

L298N Motor Driver Module Controller Board Dual H-Bridge With Robot Stepper DC TT Motor 1:48 And Smart Car Tire For Arduino Smart Car Power UNO MEGA R3 Mega2560

#ad
Relkin #ad - Yellow biaxial tt motor with 1:48 reduction ratio, great for robot car diy or other electronic production, with emc, electric motor operating voltage: dc 3v-6v recommended 3v, it has an anti-interference ability.

Use large-capacity filter capacitors and diode with freewheeling protection function, large capacity filter capacitance, afterflow protection diode, increasing reliability, more stable and reliable. L298n as main driver chip makes strong driving ability and strong anti-interference, dual-channel h-bridge driver working mode creates higher working efficiency,, drive stepper dc motors to work. To avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v. Toy wheels material: plastic, tire diameter: 65mm, tire width: 25mm. Package: 1pcs l298n module, 4pcs car tire, 4pcs DC TT motor.
BrandRelkin #ad
ManufacturerRelkin #ad
Part Number4T298

2. Aideepen

#ad

Aideepen 5pcs 1.5A 2 Way DC Motor Driver Module Speed Dual H-Bridge Replace Stepper L298N

#ad
Aideepen #ad - Dual 1. 5a * 2, do not be afraid motor stall burned, built-in thermal protection circuit, the peak current to be 2.5a, automatic recovery after the temperature dropped. Small size, 0 standby current, light weight, is the ideal choice for your car model. Use of imported original chip, built-in low on-resistance MOS switch. Minimal heat, low power consumption, no heat sink, small size, is ideal for battery powered. Dual h-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
BrandAideepen #ad
ManufacturerAideepen #ad
Part Number0113395

3. ALAMSCN

#ad

ALAMSCN 6PCS L298N Motor Driver Controller Board Module DC Motors Dual H-Bridge with Jumper Wires Kit for Arduino Smart Car Robot Power UNO MEGA R3

#ad
ALAMSCN #ad - Jumper wire kit: 20cm jumpers, male to Male, Female to Female, Male to Female each 20Pin. Note: suitable for dc motors in smaller projects, but not for prototyping. Not recommended for stepper motors. It has the strong driving ability, low calorific value and strong anti-interference ability. This is a good motor drive for an arduino and raspberry pi based RC car project. It comes with 6pcs motor drive modules and 60pcs jumper wires for different interfaces, which can meet your project needs. Motor drive controller: l298n used as the main driver chip.
BrandALAMSCN #ad
ManufacturerALAMSCN #ad
Height0.39 Inches
Length0.39 Inches
Weight0.04 Pounds
Width0.39 Inches

4. WMYCONGONG

#ad

WMYCONGCONG 5 PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper Module for Arduino

#ad
WMYCONGONG #ad - With built-in 78m05 to supply power, when the driving voltage is greater than 12V, to avoid the damage of voltage regulator chip, please use the external 5V logic power supply. L298n main driving chip, high drive ability, small heating value, strong anti-interference capability. Size: 43 * 43 * 27 mm/1. 69 * 1. 49 * 1. 06in. Dual h bridge dc stepper module, more stable and higher work efficiency. Package: 5 pcs l298N motor controller board module.
BrandWMYCONGONG #ad
ManufacturerWGCD 1 #ad
Part NumberL298N-MOTOR-5P

5. UPUNER

#ad

Used for Arduino smart car power supply UNO MEGA R3 Mega2560 2PCS, L298N motor driver controller board module, dual H-bridge robot stepper motor control

#ad
UPUNER #ad - 3. 1. However, when using a drive voltage of more than 12V, to avoid damage to the voltage regulator chip, please use an external 5V logic power supply.

Dual channel H-bridge driver working mode can improve working efficiency. 2. The module adopts st l298n chipset, which has the characteristics of strong driving ability, low heat generation and strong anti-interference ability. The module can use the built-in 78m05 for electrical work through the drive power section. 4. To avoid damage to the voltage regulator chip, when using a drive voltage exceeding 12V, please use an external 5V logic power supply. 5. The l298n module has a large-capacity filter capacitor, which can follow the current to protect the diode and improve reliability.
BrandUPUNER #ad
ManufacturerChangShaLenJinShanGMaoYouXianGongSi #ad

6. Oumefar

#ad

DC Motor Driver Motor Controller Module L298N Motor Speed Controller Dual H Bridge Motor Board Module Driver for Stepper Motor Smart Car Robot

#ad
Oumefar #ad - Powerful hear dissipation: There is a big heat sink on this H bridge driver board for better heat dissipation. Wonderful properties: this dC dual motor driver has great features of strong driving ability, low heat, strong anti-interference ability.

Convenient operation: this stepper motor driving module is very convenient to use, which is designed with screw terminals for easy wiring. Commonly used: this motor drive controller board module is normally used for driving stepping motor on smart cars or robots. Product characterization: this l298n motor drive controller board module is a H-bridge dual channel type driver, the drive voltage is 5V to 35V, and the drive current is 2A.
BrandOumefar #ad
ManufacturerOumefar #ad
Height1.26 Inches
Length1.69 Inches
Width1.69 Inches
Part NumberOumefaruoe0n7cd9v

7. HONBAY

#ad

Honbay L298N Motor Drive Controller Board DC Dual H-Bridge Robot Stepper Motor Control & Drives Module for Arduino Smart Car Power UNO MEGA R3 Mega2560 Duemilanove Nano Robo

#ad
HONBAY #ad - But to avoid the damage of the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.

Dual-channel H-bridge driver working mode creates higher working efficiency. L298n has such characteristics as strong driving ability, low calorific value and strong anti-interference ability. Using large capacity filter capacitor, this module can follow current to protect diodes, and improve the reliability. This module can use built-in 78m05 for electric work via a driving power supply part. L298n as main driver chip makes strong driving ability/small heating/strong.
BrandHONBAY #ad
ManufacturerHonbay #ad
Part NumberL298N-1P

8. ULTECHNOVO

#ad

ULTECHNOVO L298N Stepper Motor Driver Module Dual H Bridge DC 5-35V Stepper Motor Driver Controller Board Chip for Robot RC Car Black

#ad
ULTECHNOVO #ad - Made of high quality material for lasting use. Large capacity filter capacitance, a continuation protection diode, can improve reliability. Adopts l298n as the main drive chip, strong driving ability, low heat and strong anti-interference ability. Replace old or broken driver module with a new one. Note: in order to avoid the voltage regulator chip damage, when using the driving voltage is greater than 12 v, please use the external power supply 5 v logic.
BrandULTECHNOVO #ad
ManufacturerULTECHNOVO #ad
Height1.02 Inches
Length1.73 Inches
Weight0.04 Pounds
Width1.73 Inches
Part Number6CSWZSM9375E1136XQV2T
Model6CSWZSM9375E1136XQV2T

9. KOOBOOK

#ad

KOOBOOK 5Pcs 2.5A Dual Channel DC Motor Driver Mini Module Beyond L298N PWM Speed Control

#ad
KOOBOOK #ad - Small size, light weight, 0 standby current. Currently on the market of intelligent car voltage and current are in this range. With built-in thermal protection circuit, do not worry about the motor stall burned, the temperature automatically after the recovery.

L298n internal transistor switch, bulky, the market is very easy to burn the L298N, high fever, low efficiency, need to heat, are not using the original chip, this product can be replaced. Dual 2. 5a x 2, is more power than 1. 5a motor-driven version. Two-way h-bridge motor drive, can drive two DC motors or one 4-wire two-phase stepper motor at the same time. Original professional motor drive chip, energy saving, heat is minimal, builting-in low-conduction internal resistance MOS switch, no heat sink, is your ideal choice when you use battery as power supply.
BrandKOOBOOK #ad
ManufacturerKOOBOOK #ad
Part NumberKB018

10. Sunhokey

#ad

Sunhokey L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper For Arduino, 40pin Male to Male, 40pin Female to Female for, 120pcs Breadboard Jumper Wires 20cm Length 40pin Male to Female

#ad
Sunhokey #ad - It uses a large-capacity filter capacitor and diode with freewheeling protection function, thereby improving the reliability of the module. Just wire up motors and power.

Easy of use, no assembly required. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors. This l298n board comes ready to go. High working power to 46v, large current can reach 3A MAX and continue current is 2A, the power to 25w. With built-in 78m05 to supply power, when the driving voltage is greater than 12V, to avoid the damage of voltage regulator chip, please use the external 5V logic power supply. Dual-channel h-bridge driver working mode creates higher working efficiency, Use L298N as the main driving chip.
BrandSunhokey #ad
ManufacturerSunhokey #ad