As an Amazon Associate I earn from qualifying purchases.
1. Watts Premier #ad
Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer 6" X 6" #adWatts Premier #ad
- 24-hour programmable timer activates pump when you need it. Voltage: 120 volts, item weight: 8. 5 pounds. Easily installs to existing plumbing and is maintenance-free. Overall Dimension: 6.
2 x 6 x 5 inches. Provides hot water at every faucet or shower when needed and helps eliminate wasted water. Kit includes a pump with timer with 10' cord, sensor valve, valve mounting screws, 2 adapters with rubber washers, and two 12-inch supply lines.
|Brand||Watts Premier #ad|
|Warranty||Watts (the "Company") warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge|
2. PROZRTED #ad
PROZRTED Smart Instant Hot Water Recirculating Pump System 3 speed with Bulit-in Thermostat HBS24-12 #adPROZRTED #ad
- The pump default temperature is 38 ℃ off and 33 ℃ on. Lead free grade copper pump body and connectors. Smart pump: three modes are available. To avoid any water leaking, please make sure the plastic washers were not damaged and were installed correctly.
With 10 ft cord and easy to install. 2 year limited warranty with satisfactory solution. It only takes a few minutes from turning on the pump until the hot water in the pipe reaches the set temperature.
As the temperature hits 38 ℃1004f, the pump will shut off automatically. Manual mode: the most energy saving mode, just start the pump few minutes before you need the hot water.
High flow 6. 1gpm/366gph max and high lift 39. 3ft max. Can work with tank less and tanked water heater. Advanced high speed recirculating pump. When the water temperature in pump is below 33 ℃ 91. 4f, the pump will push the cold water back to the water heater. This remote controller is not included in this package and needs to be purchased separately. Start the pump by push remote control middle button.
|Warranty||2-Year Limited Warranty|
3. Anbull #ad
3/4 Inch Recirculating Pump for Water Heater System Green, Anbull Instant Hot Water Recirculating Pump System Built-In Timer with Sensor Valve Kit #adAnbull #ad
- With a sensor valve, no electricity required. The pump connector is made of lead-free copper, not easy to rust, please use Teflon tape to avoid leaks caused by loose connections. Easy to install, fanless water cooling for heat dissipation, running noise is less than 45 db, low energy consumption, quiet running, giving you a comfortable home/environment.
Please note: never let the pumP RUN DRY. Hot water recirculation pump adopts new intelligent control panel, no need to wait to turn on the faucet to get hot water, solve the trouble and water waste caused by waiting for water heating.
Min. Liquid temperature is 2℃ 36°F, strong power, high efficiency. Motor and filter parts are made of high temperature resistant materials, Max.
And the temperature is adjustable, freely set the time period you need hot water, 24-hour programmable timer, the initial set temperature is 100°F. Liquid temperature is 70℃158℉. Nsf certified, anti-scaling, maintenance-free, corrosion resistance, safe for drinking water. The intine of the circulator pump adopts mirror processing technology, long service life. Note: when the pump is connected to your piping, and more durable. All copper motor, sturdy and durable, long service life.
4. EZ-FLO #ad
Eastman 3/4 Inch Nevercold Universal Under Sink Hot Water Recirculation Pump Kit, Black, 70601 #adEZ-FLO #ad
- What is included: 1 stainless recirculating pump with a pre-wired 10 ft power cord, 2 24 inch long flex hoses with 3/4 inch NPT x 3/4 inch NPT, 2 flange gaskets, 2 3/4 inch NPT male threaded stainless steel flanges, and 2 tees with 1/2 inch compression x 3/4 inch NPT x 1/2 inch compression.
Cost effective: the nevercold hot water recirculating pump system can lower your water bill by up to 10% and save up to 12, 000 gallons of water per year.
Certified: efficient circulation pump meets California Title 24 on-call requirements. On demand hot water: the nevercold recirculating pump system is specially designed for under sink installation, and makes sure you have hot water in every area of your home when you need it, cutting down on wait times and water waste; equipped with a built-in programmable timer that activates the pump at times of demand.
Easy installation: circulating pump can be easily installed within 30 minutes, and is ideal for homes with standard single-pipe plumbing systems up to 250 feet **Not for use with tankless water heaters, requires an electrical outlet**.
5. JASSFERRY #ad
JASSFERRY Hot Water Recirculation Pump 115V 3/4 inch NPT Recirculating System Circulation Replacement Pumps for Solar Water Heater Circulating Boiler Circulator #adJASSFERRY #ad
- 5 years warranty : our recirculation pumps reach the class h insulation & IP44 protection. Power Cord 3 ft. Specific: 115v, 3-speed power 100/70/55 watts, 1/25 - 1/8 hp, 60 hz, up to 19 feet head, max working pressure 10 bar145 PSI.
We will provide support as soon as we could. We offer 5-year warranty period for all our pumps. Max flow 15 GPM. Pumps work efficient, low energy consumption, quiet running, and maintenance-free design: no need to replace mechanical seals or couplers.
Inner liquid temperature range 36℉-230℉. Easy to install: npt 3/4" connectors hot water circulation pump comes complete with the installation fittings, copper adapter x2 and gaskets x2.
Questions like missing fittings, contact us directly for assistance. Just connect the pump to the pipework with universal adjustable wrench. Features: pump body made from the heavy duty cast iron. Wide application: our recirculation pump is an universal replacement pump, is compatible for solar water heater, can replace most of hot water recirculating systems, boiler and domestic water boost pressure etc.
6. AB #ad
Hot Water Recirculating Pump, 3 Speed Switchable Circulator Pump with 1'' Threaded Flanges for Hydronic Radiant Heating, Floor Heating And Other Water Heater System, AB WiseWater Circulation Pump #adAB #ad
- Wide application: wisewater circulation water pump suitable for residential, commercial hydronic radiant heating and plumbing, forced air heating, snow melting, air conditioning, circulating heating, domestic water heating, boilers, floor heating, solar circulating water, radiant heating, hot water circulating warm and so on.
Max head Range: 9. 8/18/24 ft. Product parameter: rated power: 130/90/55 w. 1'' internal threaded flanges.
Premium quality: our hot water circulating pump with three-speed control 55/90/130 W, low noise, anti-fraying, features high efficiency with low consumption. Max pressure: 145 psi 10 bar, Flow Rate: 5.
3/11/15 gpm. High temperature resistance, anti-corrosion, high flow and no leakage, environmental protection, and easy installation. Maximum temperature: 230F. Just need a wrench to connect the pump to the existing plumbing and is maintenance-free. Parcel dimension: 6. 8 x 6. 7 x 6. 3 inches; item weight: 7 pounds; Included Components: Flanges, bolts and nuts are included.
7. KolerFlo #ad
KOLERFLO Water Recirculating Pump 3/4 Inch Circulating Water Pump for Water Heater System RS15-6 SS Green #adKolerFlo #ad
- Prevent pipes from freezing in winter, if your pipes pass through the floor, especially for cold winter areas. Bearing: Carbon axia. Max head: 6/4. 9/4 m 20/16/13 ft;pump housing: Aluminum. Rated power: 93/67/46 w. Voltage/frequency: 110-120v, composite, the circulation pump with three-speed control.
Easy installation, waiting for 2-3 minutes in the past, saving you the cost of plumbers; Instant hot water, only need a wrench to connect the pump to the pipeline, now it takes only 15 seconds to get hot water.
High temperature resistance, running power, suitable for water scarce areas, reducing the waste of cold water and waiting time, saving energy, environmental friendly, anti-fraying, high flow and leak-tightness.
Impeller: Corrosion-resistant, 60Hz. Shaft: 45 # steel. The circulation water pump features high efficiency with low consumption. Kolerflo circulation water pump rs15-6 used in suitable for city buildings, boilers, solar circulating water, air conditioning, suburban villas, water and pressurized with industrial equipment, houses, hot water circulating warm and so on. Super silent, such as desert areas. Flow: 36/29/20 lpm 9. 5/7.
8. PREMIER #ad
Watts Premier 367010 Sensor Valve for Hot Water Recirculating System #adPREMIER #ad
- Thermal By-Pass Technology. Applications: this valve must be used in conjunction with either a 500800 or 500805 Hot water Recirculating Pump. Width: 1 3/8 inches, length: 4 5/16 inches. Additional sensor Valve for use on branched hot water lines coming from the water heater.
Compatibility: this valve works only with watts premier Hot Water Recirculation Pump models 500800, 500803, 500805, and 500899. It is not designed to be used with a dedicated return line to the water heater.
9. AO Smith #ad
APCOM RT1 Hot Water Recirculating Pump System With Built-In Timer, Dedicated Return Line #adAO Smith #ad
- Enjoy the comfort and convenience of hot water in your home without the wait. Pump installs at the water heater and is designed for indoor installation. Energy & cost efficient - the most energy efficient circulator on the market that reduces waste and costs associated with the consumption of water.
Instantly experience hot water - this recirculation system provides instant hot water to any water source.
Designed for tank type water heaters. All-inclusive - kit includes stainless steel pump with flexible mounting options and built-in programmable timer, 3/4 in NPT union fittings and 10 ft power cord.
Professional installation recommended by a local certified plumbing contractor. Fully automatic operation - this system uses a built-in thermostat and programmable timer that auto-regulates temperature to save time, money and energy. For dedicated return line - perfect for houses with a dedicated return line and less than 300 ft of household piping.
10. Tysun #ad
Tysun Hot Water Recirculating Pump for Water Heater System Hot Water Circulation Pump 3/4" NPT 110V 3-Speed #adTysun #ad
- Max head: 6/4. 9/4 m 20/16/13 ft. Rated power: 93/67/46 w. Flow: 36/29/20 lpM 9. 5/7. 66/5. 28 gpm. In addition, if your pipes pass through the floor, the floor will also become warm. High qualitysuper silent, environmental friendly, anti-fraying, aesthetics.
The hot water circulation pump features high efficiency with low consumption. Wide applicationsfor city buildings, water and pressurized with industrial equipment, air conditioning, solar circulating water, boilers, houses, suburban villas, hot water circulating warm and so on.
Easy installationjust need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water the kitchen takes about 1 minute to get hot water due to low flow restriction.
High temperature resistance, high flow and leak-tightness. Advantageprevent pipes from freezing in winter, especially for cold winter areas. Specificationvoltage/frequency: 110-120v, 60hz. Max pressure: 145 psi 10 bar, the hot water circulation pump with three-speed control.