Top 10 Grit Hole Saw – Hole Saws

As an Amazon Associate I earn from qualifying purchases.

1. MAGBIT

#ad

MAG-8967 625.6616 MAG625 4-1/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth, MAGBIT

#ad
MAGBIT #ad - 1-3/8-inch depth. Use standard or SDS shank arbors. Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, concrete block, stucco, fiber cement siding & backer board, old plaster. Works in rotary and SDS hammer mode, works forward and reverse.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Height2.4 Inches
Length6.3 Inches
Weight1.05 Pounds
Width5.2 Inches
Part NumberMAG-8967
Model625.6616
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

2. MAGBIT

#ad

MAGBIT 625.6416 MAG625 4-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - Drilling a hole through concrete block takes less than 7 seconds. Cuts brick, fiber cement siding & backer board, stucco, concrete block, old plaster.1-3/8-inch depth. Works in rotary and SDS hammer mode, works forward and reverse. Use standard or SDS shank arbors.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Weight0.77 Pounds
Part NumberMAG-9015
Model625.6416
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

3. Blue Boar

#ad

Lath & Plaster, Hardi Board: Easy Plug Removal uses Standard 5/8 18 Thread Hole Saw Arbor adptr, Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” Dia for 6 inch Lights: Fast Cutting in Drywall

#ad
Blue Boar #ad - Cuts through drywall, cornHole board, plaster, fiber cement Hardie board, acoustical tile, ceiling tile. Open back design for faster cut plug removal. 1" deep - hard tungsten carbide grit edge for a long life in abrasive materials. Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit. Continuous cutting edge for smooth cutting even in wood lath and plaster.
BrandBlue Boar #ad
ManufacturerHole Pro #ad
Weight0.88 Pounds
Part NumberHP1194
ModelHP1194

4. Blue Boar

#ad

Lath & Plaster, Blue Boar Recessed Light Carbide Grit Hole Saw 4-3/8” Dia for 4 inch Lights: Fast Cutting in Drywall, Hardi Board: Easy Plug Removal uses Standard 5/8 18 Thread Hole Saw Arbor adptr

#ad
Blue Boar #ad - 1" deep - hard tungsten carbide grit edge for a long life in abrasive materials. Continuous cutting edge for smooth cutting even in wood lath and plaster. Cuts through drywall, cornHole board, acoustical tile, plaster, fiber cement Hardie board, ceiling tile. Attaches to standard 5/8”-18 2-pin mount hole saw arbor and works with Hole Pro XL-Arbor/Shield Kit or Hole Pro X-230+ model. Open back design for faster cut plug removal.
BrandBlue Boar #ad
ManufacturerHole Pro #ad
Weight0.44 Pounds
Part NumberHP1192
ModelHP1192

5. Starrett

#ad

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

#ad
Starrett #ad - Recommended cutting speed is from 150 to 300-RPM. Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials. Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface. Uniform synthetic diamond grit bonded over a durable steel platform. Clean effective cuts and extended life.
BrandStarrett #ad
ManufacturerStarrett #ad
Height2 Inches
Length8 Inches
Weight1.06 Pounds
Width6 Inches
Part Number3136574
ModelKD0414-N

6. MAGBIT

#ad

MAGBIT 625.5816 MAG625 3-5/8-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - Drilling a hole through concrete block takes less than 7 seconds. Use standard or SDS shank arbors. Works in rotary and SDS hammer mode, works forward and reverse. Cuts brick, concrete block, stucco, fiber cement siding & backer board, old plaster. 1-3/8-inch depth.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Part NumberMAG-0489
Model625.5816
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

7. MAGBIT

#ad

MAGBIT 625.2416 MAG625 1-1/2-Inch Carbide Grit Hole Saw with 1-9/16-Inch Depth

#ad
MAGBIT #ad - Works in rotary and SDS hammer mode, works forward and reverse. 1-3/8-inch depth. Cuts brick, stucco, fiber cement siding & backer board, concrete block, old plaster. Drilling a hole through concrete block takes less than 7 seconds. Use standard or SDS shank arbors.
BrandMAGBIT #ad
ManufacturerMagnus Industries Inc. #ad
Part Number625.2416
Model625.2416
WarrantyReturn defective products to place of purchase for exchange or credit. Warranty does not apply to damage caused by abuse, misuse or alteration.

8. Neiko

#ad

5 Piece | 5/32” – ½”, Neiko 00823A Diamond Grit Hole Saw Drill Bit Set

#ad
Neiko #ad - Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws. Perfect set for cutting accurate holes in a wide variety of materials such as glass and ceramics. Side holes allow for easy slug removal after drilling. Nickel plating on these bits maximizes your tool’s life with great resistance to corrosion. Sizes include: 5/32”, 3/8”, ¼”, 5/16”, and ½” with a cutting depth of ¾”and ¼” shank.
BrandNeiko #ad
ManufacturerRidgerock Tools Inc. #ad
Height1 Inches
Length4 Inches
Weight0.08 Pounds
Width3 Inches
Part Number00823A
Model00823A

9. lionmount

#ad

LionMount Diamond Grit Hole Saw Drill Bit Set 5 Pcs for Glass Tiles Ceramic Marble Bottles DIY 6 8 10 12 bonus 6 mm multi-function drill bit

#ad
lionmount #ad - Triangular-overlord handle Suitable for drilling: tile, 8, brick, wood. Wide application perfect for making clean and accurate holes on glass, porcelain, brick, tile, ceramic, marble, stone.

Better coating lionmount hole saw is made of industrial grade carbon steel with nickel-plated coated body that resist corrosion. Value pack this compact hole saw 5 pcs set includes: 1/4” 8/25” 2/5” 1/2” 6, plastic, glass, concrete, 10, 12 mm and one additional 1/4” 6mm Multifunctional drill bit. Sharp cutting thick diamond coating on tip provides a sharp cut while the design of double breach on tip and one side hole provide adequate clearance for slug removal making your drilling process flow with ease.

Contact us for professional service. Use lubricant water continuously during the drilling process. A thicker diamond coating on tip offers superior cutting strength for maximum drilling outcomes. Carefree service quality matters.
Brandlionmount #ad
ManufacturerLionMount #ad
Part NumberAHDM6

10. Lenox Tools

#ad

LENOX Tools Hole Saw, Carbide, 4-1/8-Inch 2996666CG

#ad
Lenox Tools #ad - Measures 4-1/8 inches diameter. Carbide grit edge will not snag or chip when cutting thin materials. Features a hard tungsten carbide grit cutting edge. It will cut tough abrasive materials such as fiberglass, ceramic tile, laminates. Carbide grit hole saw.
BrandLenox Tools #ad
ManufacturerLenox #ad
Height2 Inches
Length5.01 Inches
Weight0.91 Pounds
Width6 Inches
Part Number2996666CG
Model2996666CG