As an Amazon Associate I earn from qualifying purchases.
Multiple color options: includes full graphic designs and Hi-Viz models with special fade-proof colors; some Hi-Viz models include Hi-Viz reflective tape for visibility in various light conditions. Exclusive eight-point suspension disperses impact energy.
Longwearing comfort: the technically advanced suspension features eight load bearing points to stabilize and balance the hard hat for longwearing comfort during everyday wear. Lifetime limited warranty on shell and headgear. Adjustable non-slip/non-strip ratchet headgear for ultimate comfort and fit. Impact protection: full brim hard hat features a smooth crown design to deflect falling objects; the SuperEight Impact Energy Control System dissipates impacts by spreading the force over a wider area.



Use skullgard helmets in steel mills, open-pit mining, toughness and quality, welding, rubber manufacturing, oil/gas/petrochemical refineries, construction, and steam tunnels.
This date does not indicate a helmet’s service life; the service life begins when it is placed into service. See attached FAQ sheet. High quality protection: intended for general purpose use or in places elevated temperatures. Meet the voluntary standard for reverse donning, higher temperature HT, low temperature LT, and Hi-Viz HV. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ensure continued wear with drastically improved comfort and a graspable ratchet.

High quality protection: v-gard full-brim hats are made from high-density polyethylene with a UV inhibitor for superior top impact protection. Fas-trac iii suspension: designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension.
These v-gard caps have also been fully third-party tested and certified by SEI. Ensure continued wear with drastically improved comfort and a graspable ratchet. Meets professional standards: v-gard protective caps meet or exceed all applicable requirements for a Type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 class e and CSA Z94. 1-2014 class E. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling.

Lift safety - industrial safety supplies protecting today, building for TOMORROW. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy, even while wearing gloves.


Safety hard hat has patent-pending accessory mounts on front and back attach Klein Headlamps securely, every time no straps or zip ties needed! Breathable, padded sweat-wicking sweatband and top pad improve comfort and are machine washable.


1. Fibre-Metal Hard Hat
#ad
White, Fibre-Metal by Honeywell E1RW Supereight Thermoplastic Full Brim Hard Hat with 8 Pt. Ratchet Suspension
#adFibre-Metal Hard Hat #ad - Elements protection: full brim adds an extra protection against harmful UV rays, and falling debris; thermoplastic material is heat- and scratch-resistant; meets ANSI Z89. 1-2009 type 1, rain, Class E. Exclusive overlay designs, heat and scratch resistant.Multiple color options: includes full graphic designs and Hi-Viz models with special fade-proof colors; some Hi-Viz models include Hi-Viz reflective tape for visibility in various light conditions. Exclusive eight-point suspension disperses impact energy.
More information #ad
Custom fit: the 8-point ratchet suspension adjusts easily with a quick-turn knob to fit almost any head size; the ratchet is non-slip to ensure a snug fit, and strip-proof for long-lasting durability. Smooth thermoplastic crown deflects impacting objects. Longwearing comfort: the technically advanced suspension features eight load bearing points to stabilize and balance the hard hat for longwearing comfort during everyday wear. Lifetime limited warranty on shell and headgear. Adjustable non-slip/non-strip ratchet headgear for ultimate comfort and fit. Impact protection: full brim hard hat features a smooth crown design to deflect falling objects; the SuperEight Impact Energy Control System dissipates impacts by spreading the force over a wider area.
Brand | Fibre-Metal Hard Hat #ad |
Manufacturer | Fibrastore 6669304425 #ad |
Height | 9 Inches |
Length | 12 Inches |
Weight | 0.43 Pounds |
Width | 9 Inches |
Part Number | E1RW01A000 |
Model | E1RW01A000 |
Warranty | Lifetime limited warranty on shell and headgear |
More information #ad
2. Pyramex Safety
#ad
Matte White Graphite Pattern, 4-Point Ratchet Suspension, Pyramex Ridgeline Full Brim Hard Hat
#adPyramex Safety #ad - Constructed from abs material — Strong, yet ultra-light for seemingly weightless protection. Ratchet suspension is easy to adjust and allows the wearer to modify the fit while wearing hard hat.More information #ad
Meets ansi z89. 1-2009 standards, g, type 1, Class C, and E.4-point suspensions can be converted to a 6-point suspension with the HP6PTSUS. Replaceable soft brow pad, suspensions and headbands also available.Brand | Pyramex Safety #ad |
Manufacturer | Pyramex #ad |
Height | 0.1 Inches |
Length | 0.1 Inches |
Weight | 0.1 Pounds |
Width | 0.1 Inches |
Part Number | HP54116 |
Model | HP54116 |
More information #ad
3. Evolution Deluxe 6161
#ad
6-Point Polyester Suspension and Wheel Ratchet Adjustment Vented, White, Evolution Deluxe 6161 280-EV6161-10V Full Brim Hard Hat with HDPE Shell
#adEvolution Deluxe 6161 #ad - Unique "3d adjustment" provides a precise fit using harness depth settings. Hat size: 6 5/8 - 8 20 7/8" - 25". 6 point suspension system with polyester textile straps offers unrivaled comfort without compromising performance.More information #ad
Meets ansi/isea z89. 1-2009, type i, class C requirements. High-density polyethylene HDPE shell with a full brim providing additional protection against sun, glare, rain and falling debris. Vented to reduce inside helmet temperatures.Brand | Evolution Deluxe 6161 #ad |
Manufacturer | Evolution Deluxe 6161 #ad |
Height | 0.1 Inches |
Length | 0.1 Inches |
Weight | 0.5 Pounds |
Width | 0.1 Inches |
Part Number | 280-EV6161-10V |
Model | 280-EV6161-10V |
More information #ad
4. MSA
#ad
Made of Phenolic Resin, MSA 475408 Skullgard Full-Brim Hard Hat with Fas-Trac III Ratchet Suspension | Non-slotted Hat, Radiant Heat Loads up to 350F, Standard Size in White
#adMSA #ad - With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization. Variety of sizes & colors: comes available in a large variety of colors and sizes with custom imprinting and striping options. Date codes are molded into the underside of the shell’s brim with the year and month in which that specific shell was manufactured.Use skullgard helmets in steel mills, open-pit mining, toughness and quality, welding, rubber manufacturing, oil/gas/petrochemical refineries, construction, and steam tunnels.
More information #ad
These skullgard helmets have been tested to radiant heat loads producing temperatures up to, but not exceeding 350°F. A smooth crown allows for the easiest use of all MSA welding equipment. Multi-purpose cap strength: crafted with a phenolic shell and handmade for durability, this helmet is usable in a variety of industries. This date does not indicate a helmet’s service life; the service life begins when it is placed into service. See attached FAQ sheet. High quality protection: intended for general purpose use or in places elevated temperatures. Meet the voluntary standard for reverse donning, higher temperature HT, low temperature LT, and Hi-Viz HV. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit. Ensure continued wear with drastically improved comfort and a graspable ratchet.
Brand | MSA #ad |
Manufacturer | MSA Safety #ad |
Height | 5.8 Inches |
Length | 12 Inches |
Weight | 1.04 Pounds |
Width | 10.4 Inches |
Part Number | 475408 |
Model | 475408 |
More information #ad
5. MSA
#ad
Standard Size in White, Superior Impact Protection, MSA 475369 V-Gard Full-Brim Hard Hat With Fas-Trac III Ratchet Suspension | Polyethylene Shell, Self Adjusting Crown Straps
#adMSA #ad - With custom logo options and any of 27+ different reflective and retro-reflective stripes, MSA gives the ultimate experience in hardhat customization. Flush rear lug attachments eliminate pressure points and three levels of nape strap adjustment give for a fully customized fit.High quality protection: v-gard full-brim hats are made from high-density polyethylene with a UV inhibitor for superior top impact protection. Fas-trac iii suspension: designed based on opinions and input from hundreds of customers, our top-end Fas-Trac III suspension functions as an improved ratchet suspension.
More information #ad
With a collection of 100+ accessories, ranging from sun shades and shields to liners and lamps, your helmet will always be fit for whatever task is at hand. For use in general industry and manufacturing markets, or those featuring electric/utilities, construction, or oil, gas and petrochemical work. These v-gard caps have also been fully third-party tested and certified by SEI. Ensure continued wear with drastically improved comfort and a graspable ratchet. Meets professional standards: v-gard protective caps meet or exceed all applicable requirements for a Type I top impact helmet as outlined in ANSI/ISEA Z89. 1-2014 class e and CSA Z94. 1-2014 class E. Ratchet comfort pad is contoured to the back of the head, improving airflow and preventing hair-pulling.
Brand | MSA #ad |
Manufacturer | Msa Safety Sales, Llc #ad |
Height | 7.4 Inches |
Length | 11.65 Inches |
Weight | 0.94 Pounds |
Width | 10.5 Inches |
Part Number | 475369 |
Model | 475369 |
More information #ad
6. LIFT Safety
#ad
LIFT Safety, HDF50C-19WC Lift Safety DAX Fifty 50 Carbon Fiber Full Brim Hardhat White
#adLIFT Safety #ad - Triple reinforced crown for superior impact protection. Our helmet line with race inspired designs offer a 6 point suspension system for superior comfort and impact protection.Lift safety - industrial safety supplies protecting today, building for TOMORROW. It features an innovative synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy, even while wearing gloves.
More information #ad
Designed to offer outstanding protection in hot and dangerous industries, but not exceeding, the DAX Hard hat shell has been tested to radiant heat loads producing temperatures up to, 350˚ F 177˚ C.Brand | LIFT Safety #ad |
Manufacturer | Lift Safety #ad |
Height | 7.5 Inches |
Length | 12 Inches |
Width | 11 Inches |
Part Number | HDF50C-19WC |
Model | HDF50C-19WC |
More information #ad
7. MSA
#ad
White, MSA Skullgard Full Brim Hard Hat with FasTrac III Ratchet Suspension
#adMSA #ad - Offers the finest combination of safety, personal comfort and value in head protection. Fiberglass material protects your head from high heat environments.More information #ad
Meets ansi z89. 1 2014 class g ratings with FasTrac III Ratchet Suspension. You'll be supporting your country by buying USA made products. Full brim for full coverage protection.Brand | MSA #ad |
Manufacturer | MSA #ad |
More information #ad
8. Klein Tools
#ad
Vented, Klein Tools 60407RL Hard Hat, Full Brim Style, Padded Self-Wicking Odor-Resistant Sweatband, Rechargeable Headlamp, White
#adKlein Tools #ad - Easy, one-handed adjustment with large knob ratchet mechanism even with gloves on, and soft neck pad pivots to clear bandana knots and pony tails. Adjustable vents can be opened or closed to control air circulation in hot and cold weather.Safety hard hat has patent-pending accessory mounts on front and back attach Klein Headlamps securely, every time no straps or zip ties needed! Breathable, padded sweat-wicking sweatband and top pad improve comfort and are machine washable.
More information #ad
Unique suspension system features a flexible open frame design to provide optimal fit and improved air circulation. Class c, csa z94. 1-15; en397:2012+a1:2012-5. 2. 4 lateral deformation-ld; en12492:2012-4. 2. 1. 2, type 1 hard hat with adjustable vents meets ANSI Z89. 1-2014, 4. 2. 1. 3, 4. 2.Brand | Klein Tools #ad |
Manufacturer | Klein Tools #ad |
Height | 7 Inches |
Length | 12 Inches |
Weight | 0.9 Pounds |
Width | 10.5 Inches |
Part Number | 60407RL |
Model | 60407RL |
More information #ad
9. Texas America Safety Company
#ad
White, MSA V-Gard Full Brim Hard Hats w/FasTrac III Suspensions with Handy Tote Bag
#adTexas America Safety Company #ad - Perfect for most industrial settings. Meets ansi z89. 1-2014 class e, type i and canada csa z94. 1-2005 class e, Type I. Made in the USA. Provides a combination of strength, affordability and comfort. Offers the finest combination of safety, personal comfort and value in head protection.More information #ad
Brand | Texas America Safety Company #ad |
Manufacturer | MSA #ad |
More information #ad
10. Texas America Safety Company
#ad
Texas America Safety Company Actual Carbon Fiber Material Hard Hat with Hard Hat Tote- Full Brim, White
#adTexas America Safety Company #ad - Padded harness head cushion. Carbon Fiber for added durability. Triple enforced Crown for added protection. Meets ansi z89. 1 class c Type 1 Regulations. 6 point Ratchet Suspension.More information #ad
Brand | Texas America Safety Company #ad |
Manufacturer | Texas America Safety Company #ad |
Part Number | TOTEHDFM-15KG-00 |
Warranty | Manufacturer’s warranty can be requested from customer service. |
More information #ad