Top 10 Freight Harbor Tools Impact Driver – Power Impact Wrenches

As an Amazon Associate I earn from qualifying purchases.

1. NoCry

#ad

300 ft-lb 400 N.m Torque, 2200 Max RPM, Fast Charger & Carrying Case Included, Belt Clip; 4.0 Ah Battery, 1/2 inch Detent Anvil, 2700 Max IPM, NoCry 20V Cordless Impact Wrench Kit

#ad
NoCry #ad - This cordless impact wrench will effortlessly loosen any lug nut, bolt or large screw with 300 ft-lb 400 N. M of torque, fast charger, a belt clip, and give you 260 ft-lb 350 N. M to tighten them. No return required. The 1/2in detent anvil will remove tires from cars, motorcycles, major construction projects, trucks, and trailers in a flash at 2200 rpms - and can be used for automotive repairs, heavy equipment maintenance, commercial vehicles, or product assembly.

If you receive a defective product, immediately contact us and we will send you a replacement unit for free. We feel very bad about it and are actively working on solutions. The 2700 max ipm rate creates heavy duty impacts for easy fastening and loosening of nuts and bolts - just as effective as a bulky and expensive pneumatic air powered electric gun.

Important: there is an ongoing issue with the forward/reverse selector switch that prevents a small percentage of our impact wrenches from working properly. Along with the tool itself, you will get one 20volt battery, and a carrying case. We have managed to reduce the rate of these faulty units considerably, but not yet completely. Work quicker, longer and with fewer stops thanks to the rechargeable 20V 4. 0 ah lithium-ion battery - fully charged in only 2 hours with the NoCry fast charger both compatible with NoCry 20V power tools only.
BrandNoCry #ad
ManufacturerNoCry #ad
Weight8.29 Pounds
Part NumberNC-IW-400NM
ModelNC-IW-400NM
Warranty4-YEAR LIMITED WARRANTY - If you’re not happy with your NoCry product, please contact us within 30 days of receiving it at [email protected] to return it for free for a replacement product or to receive a full refund. Each NoCry electric product is warranted to be free of defects in material and workmanship for 4 years after purchasing. Warranty does not cover normal wear and tear, environmental factors, accidental damage, or misuse. At NoCry’s discretion, a defective product will be repaired or replaced. This warranty gives you specific legal rights, but may be superseded by any other rights or warranties in effect, which may vary from state to state. If you think you might have a defective product, please contact us at [email protected] to start the (free) procedure to determine whether your product is defective. More info at https://nocry.com/warranty

2. Dewalt

#ad

2-Tool DCK240C2, DEWALT 20V Max Cordless Drill Combo Kit

#ad
Dewalt #ad - Dcd771 in cordless drill combo kit features 2 speed transmission 0-450 / 0-1500 RPM. Dcd771 compact, lightweight design of the drill/ impact driver combo kit fits into tight areas.

Dcd771 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength. Dcf885 features 3 led light ring withe 20 second delay to provide visibility without shadows. Dcd771 high performance motor of cordless tools combo kit delivers 300 unit watts out UWO of power ability completing a wide range of applications. Dcf885 compact 5. 55-inch front to back, lightweight 2. 8 lbs design fits into tight areas. Dcd771 ergonomic handle delivers comfort and control. Dcf885 1-handed loading 1/4-inch hex chuck accepts 1-inch bit tips.
BrandDewalt #ad
ManufacturerDewalt #ad
Height9.88 Inches
Length15.06 Inches
Weight9.1 Pounds
Width6.38 Inches
Part NumberDCK240C2
ModelBrush
Warranty3 year limited warranty

3. Dewalt

#ad

1/4-Inch DCF885C1, DEWALT 20V Max Impact Driver Kit

#ad
Dewalt #ad - Dewalt 20v 1/4 impact driver features one-handed loading 1/4-inch hex chuck accepts 1-inch bit tips. 3 leds with 20-second delay after trigger release of the cordless impact driver provide visibility without shadows. Compact 5. 55-inch front to back, lightweight 2. 8 lbs design of dEWALT impact driver fits into tight areas.
BrandDewalt #ad
ManufacturerDewalt #ad
Height3 Inches
Length5.55 Inches
Weight2.8 Pounds
Width9 Inches
Part NumberDCF885C1
ModelDCF885C1
Warranty3 year limited warranty

4. ACDelco Tools

#ad

ACDelco ARI20170-M P20 Series 20V Cordless Li-ion 1/2” 1,260 ft-lbs. Heavy Duty Impact Wrench Tool Kit with Carrying Case

#ad
ACDelco Tools #ad - Torque impact wrench is engineered with high-quality materials for fast and easy removal work. Value kit – our p20 impact wrench tool kit comes with a cordless impact driver, a powerful interchangeable 20V Li-ion batteries, a fast charger that can fully charge the battery in 30 minutes, and a hard shell blow mold case that protects your tool from drops and slams.

1, 0-700 rpm, and 665 ft-lbs. 100% satisfaction guaranteed – for over 35 years we have been manufacturing and providing the best products and services to our customers at the lowest prices possible. Ultra efficiency – our powerful dc motor is highly efficient, 260 ft-lbs. Equipped with an 1/2” alloy steel head and built-in LED light great for work in tight and dark spaces. Heavy duty – our lightweight, and powerful 1, aircraft, 260 ft-lbs. Torque and 0-1, 1, 355 nm of max reverse torque, with longer lifespan and requires less maintenance. We are confident that you will absolutely love our impact wrench tool kit that we will stand behind our product with a replacement or your money back! Every purchase comes with a manufacturer’s limited 1-year warranty, so you can buy with confidence! Slim body design molded to securely fit with built-in convenient safety lock switch.

Variable speed control – unlike other brands that come in just one speed; our impact wrench comes with variable speeds, and an electric brake switch, a reversible control, that enable users to utilize different speeds based on the various applications.900 nm of max tightening torque.
BrandACDelco Tools #ad
ManufacturerDurofix Inc. #ad
Weight6.82 Pounds
Part NumberARI20170-M
ModelARI20170-M
Warranty1 Year Limited Warranty

5. RYOBI

#ad

Ryobi P235 1/4 Inch One+ 18 Volt Lithium Ion Impact Driver with 1,600 Pounds of Torque Battery Not Included, Power Tool Only Renewed

#ad
RYOBI #ad - Simply pull back on the cuff to eject your bits. Onboard organization: Magnetic tray can hold screws and bits for maximum user convenience.

One+ compatible: keep this tool charged with any of the lithium ion batteries from the ryobi One+ family. Comfortable handling: a notched rubber grip conforms to the pistol grip handle so you can drive screws accurately in the worst conditions. Compatible batteries include: p100, p104, p107, p101, P102, P103, P105, P108. You can even use older NiCad batteries. Change bits with one hand: quick connect cuff attached to the quarter inch chuck lets you insert bits and remove them with the same hand.
BrandRYOBI #ad
ManufacturerRyobi #ad
Part NumberP235-cr
ModelP235-cr
Warranty90 days limited warranty

6. Neiko

#ad

NEIKO 30249A Impact Adapter and Reducer Set | 5 Piece | Standard SAE Sizes | Cr-V Steel | Impact Driver and Wrench Conversion Kit | Locking Socket Adapters

#ad
Neiko #ad - Specific impact grade design made exclusively for drivers and wrenches. Spring loaded detent balls keeps your sockets secure with through holes that allows the use of locking pins and rings. Highly durable black oxide coating finish is corrosion resistant to eliminate chance of rust for a long lasting tool life. Constructed of heavy duty drop forged, heat treated chrome vanadium steel for superior strength to endure all conditions. Universal 5 piece set includes 2 reducers: 3/8" female x 1/4" male, 3/8" f x 1/2" m, 1/2 inch f x 3/8" m and 3 adaptors: 1/4" F x 3/8" M, 1/2" F x 3/4" M.
BrandNeiko #ad
ManufacturerNeiko #ad
Height1 Inches
Length2 Inches
Weight0.62 Pounds
Width3.5 Inches
Part Number3792988
Model30249A

7. PORTER-CABLE

#ad

Tool Only PCC740B, PORTER-CABLE 20V MAX Impact Wrench, 1/2-Inch

#ad
PORTER-CABLE #ad - Maximum of 1, 650 rpm's for driving large fasteners quickly. Powerful motor produces 330ft/lbs of torque for heavy applications. 1/2" hog ring for quick and easy socket changes. Battery and charger sold separately. 3 year limited warranty. Full variable speed trigger for precision control.
BrandPORTER-CABLE #ad
ManufacturerPORTER-CABLE #ad
Height7 Inches
Length9.9 Inches
Weight5 Pounds
Width3 Inches
Part NumberPCC740B
ModelPCC740B
Warranty3 year limited warranty

8. ABN

#ad

6pc SAE 6 IN Long Shank Nut Driver Bits Magnetic Tip Sockets, 1/4 IN Hex Shank, ABN Impact Nut Driver Tool Set

#ad
ABN #ad - Package contents: impact driver socket adapter set includes 6 sae impact drivers 1/4, 5/16, 1/2, 7/16, 3/8, and 9/16 inch and 1 bit driver holder; Each magnetic extended nut driver bit nutsetter tool is permanently laser-etched sizing makes identification easy.

Extend your reach: 6-inch 15. 2cm long reach to access narrow spaces and hard-to-reach areas; 1. 25 inch 3. 1cm long hex shanks feature 1/4 inch 6. 35mm diameter. Built to last: prevent rounding off fasteners with the recessed 6 point nut drivers for impact drills; Chrome-vanadium steel and black phosphate coating provides maximum strength and rust resistance.

Impact driver set: use the abn sae magnetic nut driver Bits Impact Drill Sockets Set to tighten and remove nuts and bolts when working in your home, on your vehicle, or on metal or woodworking projects. Never drop a fastener again: impact nut driver magnetic impact driver sockets set have powerful magnets to provide superior retention on screws, nuts, and bolts while operating.
BrandABN #ad
ManufacturerABN #ad
Height3.6 Inches
Length6 Inches
Weight1.1 Pounds
Width0.4 Inches
Part Number6217

9. Dewalt

#ad

Compact, 1/2-Inch DCD771C2, DEWALT 20V Max Cordless Drill / Driver Kit

#ad
Dewalt #ad - Dewalt drill has compact and lightweight design that fits into tight areas. High performance motor of the power drill delivers 300 unit watts out UWO of power ability completing a wide range of applications. Ergonomic handle delivers comfort and control. 1/2-inch single sleeve ratcheting chuck provides tight bit gripping strength. High speed transmission of dewalt 20v drill delivers 2 speeds 0-450 & 1, 500 rpm for a range of fastening and drilling applications. Tool Height-6. 5 inch.
BrandDewalt #ad
ManufacturerDewalt #ad
Height4.25 Inches
Length13.88 Inches
Weight3.64 Pounds
Width9.88 Inches
Part NumberDCD771C2
ModelDCD771C2
Warranty3 Year Limited Warranty

10. ARES

#ad

3-Inch Impact Grade Socket Adapter Set, 1/4-Inch, 3/8-Inch, and 1/2-Inch Drive, ARES 70000, Turns Impact Drill Driver into High Speed Socket Driver

#ad
ARES #ad - If you have any issues with your ares impact Grade Socket Adapter/Extension Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. The sizes included are 1/4 inch, 3/8 inch, and 1/2 inch. If you have a pet, you realize they are more than a pet, they are part of the family.

You are backed by our Performance Assurance Limited Lifetime Warranty. Aspca business ambassador: we are proud to be part of the aspca business Ambassador Program. Reliable | effective | efficient: users trust ares to be quality tools. Design considerations: each adapter is made of heat-treated chrome vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and meets or exceeds ANSI/ASME standards. Impact grade: these impact-grade corrosion-resistant adapters are perfect for increased torque projects, helping to prevent the breaking and stripping of sockets.

Specifications: this ares impact grade socket adapter/extension set comes with three 1/4 inch hex shank, 3-inch-long socket adapters so you can turn any impact drill driver into a power socket driver with the extra reach you need. The spring loaded detent ball ensures sockets are secured to the adapters. With your support, we’re proud to help this great organization.
BrandARES #ad
ManufacturerARES #ad
Height4.2 Inches
Length0.6 Inches
Width5.4 Inches
Part Number70000 70001 70002
ModelFBA_70000