Top 10 Fluke Test Leads – Test Probes & Leads

As an Amazon Associate I earn from qualifying purchases.

1. Fluke

#ad

Deluxe Electronic,Red/Black,Small, Fluke TL81A Test Lead Set

#adFluke #ad - 26mm maximum jaw opening. Slide-on ic probe tip adapter rated up to 3A and test lead couplers. Bare spade lug with banana connector, rated up to 10A.

Cat iii 3000-volt, compatible with fluke and other multimeters that accept safety shrouded, standard diameter banana connectors. 3 alligator clips red, black, green. Silicone-insulated leads have superior flexibility in cold temperatures and resistance to high temperatures. 3 test leads red, black, green connected to low-leakage probes. Replacement test lead set for the fluke 1550B MegaohmMeter. 2. 6m lead length. Insulated alligator clip rated up to 5A.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	0 Inches
Length	0 Inches
Weight	1 Pounds
Width	0 Inches
Part Number	1277073
Model	TL81A

2. Fluke

#ad

Fluke TL224 SureGrip Insulated Test Leads

#adFluke #ad - Rubber over molded surfaces and finger hugging curves give the user a comfortable, reliable grip. Reinforced strain relief.

1. 5 meter silicone insulated wire resists heat & cold. Cat iv 600 v, cat iii 1000 v, 10 a rating; UL listed. Suregrip accessories are designed to improve steadiness in slippery hands. Right angle connector on one end and straight connector on the other. Dmm test leads red, black with safety shrouded, standard diameter banana plugs. Reinforced strain relief. Right angle and straight connector. Dmm test leads red, black with safety shrouded, standard diameter banana plugs.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	6.1 Inches
Length	3.6 Inches
Weight	0.24 Pounds
Width	1.6 Inches
Part Number	1610198
Model	TL224

3. Fluke

#ad

Right Angle, Fluke, TL71-1 TL71 Premium Test Lead Set

#adFluke #ad - Flexible silicone leads. Kit includes 1 mini-hook test lead set. Cat iv 600 v, cat iii 1000 v, 10 a rated and UL listed. Extra hard probe tips to provide long service life. 1 micro-hook test lead set. Recommended for µV measurements. One pair red, black of test leads. 1 mini-pincer test lead set. 1 year warranty.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	11.89 Inches
Length	1.26 Inches
Weight	0.2 Pounds
Width	4.02 Inches
Part Number	1274382
Model	TL71
Warranty	Limited warranty and limitation of liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. This warranty is your only remedy. No other warranty such as fitness for a particular purpose are expressed or implied. Fluke is not liable for any special, indirect, incidental or consequential damages or loss arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

4. Fluke

#ad

Fluke TL80A Basic Electronic Test Lead Kit

#adFluke #ad - Tl71 premium test lead Set is recommended for µV measurements. 3 alligator clips red, black, green. 2. 6m lead length. Fundamental accessories for testing. Safety rating: caT II 300 V. Replacement test lead set for the fluke 1550B MegaohmMeter. 3 test leads red, black, green connected to low-leakage probes. 26mm maximum jaw opening. Includes: alligator clips and probe tip extenders. C75 soft accessory case, polyester.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	0 Inches
Length	0 Inches
Weight	0.5 Pounds
Width	0 Inches
Part Number	1277086
Model	TL80A
Warranty	Limited warranty and limitation of liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. This warranty is your only remedy. No other warranty such as fitness for a particular purpose are expressed or implied. Fluke is not liable for any special, indirect, incidental or consequential damages or loss arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

5. Fluke

#ad

Fluke TL75 Hard Point Test Lead Set

#adFluke #ad - One pair red, black of comfort grip probes. Recommended for general purpose measurements. 48" 1. 22 meter pvc insulated test leads with right-angle shrouded banana plugs. Hard point test lead set. Economical PVC insulated leads. 1 year warranty. Extremely hard alloy tips resist wear. Distinctive comfort grip probes. Cat iii, 1000 volt, 10 amps.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	5 Inches
Length	5 Inches
Weight	0.2 Pounds
Width	8 Inches
Part Number	TL75
Model	FLUTL75

6. Fluke

#ad

Fluke TL221 Suregrip+ Silicone Test Lead Extension Kit

#adFluke #ad - Includes one pair red, black of female couplers. Reinforced strain relief. One pair red, black of silicone insulated leads with straight connectors on both ends. Kit includes 1 mini hook test lead set. Rubber over molded surfaces and finger hugging curves give the user a comfortable, reliable grip. Suregrip accessories are designed to improve steadiness in slippery hands. 1 mini pincer test lead set. 1 micro hook test lead set. 1 year warranty.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	11.81 Inches
Length	11.81 Inches
Weight	0.24 Pounds
Width	11.81 Inches
Part Number	FLUTL221
Model	TL221
Warranty	Limited warranty and limitation of liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. This warranty is your only remedy. No other warranty such as fitness for a particular purpose are expressed or implied. Fluke is not liable for any special, indirect, incidental or consequential damages or loss arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

7. Fluke

#ad

Fluke TL910 Electronic Test Probes

#adFluke #ad - Test lead length: 1 meter. Probe tip length up to 100 mm. Included: 3 sets of spring loaded gold tips and 2 sets of stainless steel tips. Very small 1 mm tips to access hard to reach test points. Cat ii 1000v 3a rating.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	0.4 Inches
Length	6.2 Inches
Weight	0.13 Pounds
Width	3.5 Inches
Part Number	1616632
Model	TL910
Warranty	Limited warranty and limitation of liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. This warranty is your only remedy. No other warranty such as fitness for a particular purpose are expressed or implied. Fluke is not liable for any special, indirect, incidental or consequential damages or loss arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.

8. WGGE

#ad

4mm Test Lead Probe Suitable for Most of Digital Multimeter, WGGE WG-011 Test Lead and Safety alligator Clips,Multimeter Test Leads Kit CAT III 1000V & CAT IV 600V with Threaded alligator clips

#adWGGE #ad - Threaded alligator clip: 8-32 threaded barrel connection, Material: nickel plated steel, Material: nickel plated brass clip, Rating: 10 Amps Threaded alligator clip dimensions 65mm x 20mm x 20mm. More secure and durable stringtwo pvc insulation lead wires with two threaded probe tips Constructed with flexible PVC/PA material that is double-layered and -insulated.

The silicone used is non-toxic, environment friendly and meets both the RoSH and CE standards. Using high quality materials ensures that the test leads are durable, flexible as well as having properties like freeze resistance and heat tolerance. Compatibilitythe test lead wire - 40 inches, test lead length- 47inches, Shrouded 4mm banana plugs- ends test lead accept 4mm banana plug tip Bullet Point. Quality clips threaded safety alligator clips' jaw opening is 05'', jaw open 031” 7.

9mm max, glass filled nylon housing Safety alligator clip dimensions 49mm x 10mm x 7mm. Multimeter test leads kit test lead x2, Threaded alligator clips x2, Threaded Safety alligator clips x2, two different color black, red. Certificate / guarantee international electrotechnical commission iec certified for category III installations up to 1, HIGH QUALITY. 18-month warranty and 24/7 customer service, 000V, and we will resolve your issue within 24 hours.

Brand	WGGE #ad
Manufacturer	W&G GLOBAL ELECTRONICS INC #ad
Height	0.6 Inches
Length	7 Inches
Weight	0.29 Pounds
Width	3.5 Inches
Part Number	WG-011

9. Klein Tools

#ad

Right Angle Klein Tools 69410, Replacement Test Lead Set

#adKlein Tools #ad - Leads are 41-inches 1, 041 mm long. Removable alligator clips attach to wires and other conductors. Includes one pair of universal test leads and one set of alligator clips. Leads compatible and fit lead storage compartment on most Klein test and measure products. Standard banana-type inputs compatible with most multimeters and clamp meters. Safety rating: category iii 1000V and Category IV 600V.

Brand	Klein Tools #ad
Manufacturer	North Coast Electric #ad
Height	9 Inches
Length	1.75 Inches
Weight	0.2 Pounds
Width	4 Inches
Part Number	69410
Model	69410
Warranty	1 Year Manufacturer

10. Fluke

#ad

Fluke TL40 Retractable Tip Test Lead Set, Right Angle

#adFluke #ad - Kit includes 1 mini-hook test lead set. 1 micro-hook test lead set. Flexible silicone leads. Extra hard probe tips to provide long service life. 1 mini-pincer test lead set. Sharp needle point tips adjustable to desired length from 0 to 76 mm. One pair red, black of test leads. Cat iii 300 v, 3 a rating, UL listed. 1 year warranty.

Brand	Fluke #ad
Manufacturer	Fluke #ad
Height	1.5 Inches
Length	5.7 Inches
Weight	0.15 Pounds
Width	3.1 Inches
Part Number	1590606
Model	TL40
Warranty	Limited warranty and limitation of liability This Fluke product will be free from defects in material and workmanship for one year from the date of purchase. This warranty does not cover fuses, disposable batteries, or damage from accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling. Resellers are not authorized to extend any other warranty on Fluke's behalf. To obtain service during the warranty period, contact your nearest Fluke authorized service center to obtain return authorization information, then send the product to that Service Center with a description of the problem. This warranty is your only remedy. No other warranty such as fitness for a particular purpose are expressed or implied. Fluke is not liable for any special, indirect, incidental or consequential damages or loss arising from any cause or theory. Since some states or countries do not allow the exclusion or limitation of an implied warranty or of incidental or consequential damages, this limitation of liability may not apply to you.