As an Amazon Associate I earn from qualifying purchases.
Peachtree Woodworking Supply #ad - This makes the clamp strong, durable and rust resistant which makes it ideal for many applications in the shop or around the home. Place the clamp where its needed then simply turn the key to loosen or tighten them. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
This pvc hose checks all of those boxes and more! . When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, piping or hose to use can be challenging.
304 stainless steel hose clamp- the 2 ½” diameter large hose duct clamp including the housing, the band and the internal screw are made from premium 304 stainless steel. No more tools! – set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. Dust collection hoses need to be not only long enough, but it must be durable, so it won’t completely collapse in use. The hose has a compression ratio of 3: 1.
LOSTRONAUT #ad - 100% satisfaction guaranteed - 30-day return policy + 12-month warranty. Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system. 2 - 1/2 '' x 10' puncture resistant, tear or kink, heavy-duty hose no collapse, Includes 2 stainless steel key hose clamps.
Peachtree Woodworking Supply #ad - Ideal for sawdust collection and other general shop applications. Dust collection hoses need to be not only long enough, flexible and sturdy enough, but it must be durable, so it won’t completely collapse in use. While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes.
When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. The hose has a compression ratio of 3: 1. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
It must also perform under the constant use and abuse of an everyday workshop environment. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. Pvc hose depending on diameter can be used with dust collectors, industrial vacuum systems, shop vacuums, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go.
Fulton #ad - While pvc hose can be used on other machinery or devices it has been designed for dust collection purposes. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. It must also perform under the constant use and abuse of an everyday workshop environment.
When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. The hose has a compression ratio of 3: 1. Typically, pvc hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. Dust collection hoses need to be not only long enough, flexible and sturdy enough, but it must be durable, so it won’t completely collapse in use.
POWERTEC #ad - Opening also allows you to fit Shop-Vac, Sears and a variety of other wet/dry vacuum cleaners. Please note: this cone reducer is specifically designed to work exclusively with 4” and 2-1/2” hoses | It is NOT intended to fit or accommodate a 2-1/2” OD or 4” OD dust collection equipment port directly which would require POWERTEC 70149 or 70148 Flex Cuffs.
The 2-1/2 in. Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.
POWERTEC #ad - Includes one 2-1/2" diameter 50 feet long left spiral clear flexible hose. Perfect for any clear view dust collection system – allowing you to monitor dust/ debris separation and vapor/ smoke filtration. Ultra flexible hose reinforced with spring steel wire delivers toughness and maneuverability.
Peachtree Woodworking #ad - The pvc hose is wrapped around a steel wire that can easily be grounded. This heavy duty hose will not collapse under pressure from your dust collector.
GSM Brands #ad - Safe: clean workstations prevent accidents and keep machinery in good working order. If this hose fails to live up to your expectations, simply return it for a full refund.
Money back guarantee - we are confident that you will have a great experience with this hose. Tough: 20 feet of sturdy pvc is puncture resistant, won't collapse under your dust collector pressure and our design offers a tight bend radius so you can reach into tight spaces with ease.
POWERTEC #ad - Application: an expandable dust collection hose that extends up to 36 inches 3ft, and snake into a variety of positions for optimal project versatility. Ingenuous segmented design means it will maintain desired rigidity when dust collecting in hard to reach areas, and possesses the ability to bend, twist, thus maintaining optimal air flow to your dust collector.
Includes: 2-1/2” left Spiral Dust Collection Hose.
LOSTRONAUT #ad - Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired. Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.
1. Peachtree Woodworking Supply
#ad2-1/2 inch Diameter by 10 foot Long PVC Dust / Debris Collection Hose MADE IN THE USA with 2 each 2.5 inch Turnkey Stainless Steel Hose Clamps
#adThis pvc hose checks all of those boxes and more! . When setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, flexible and sturdy enough, piping or hose to use can be challenging.
More information #ad
It must also perform under the constant use and abuse of an everyday workshop environment. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. 304 stainless steel hose clamp- the 2 ½” diameter large hose duct clamp including the housing, the band and the internal screw are made from premium 304 stainless steel. No more tools! – set your tools aside when installing your ductwork or hose with these handy, easy to tighten hose/duct clamps. The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. Dust collection hoses need to be not only long enough, but it must be durable, so it won’t completely collapse in use. The hose has a compression ratio of 3: 1.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Peachtree Woodworking Supply Inc. #ad |
| Part Number | 6173 |
| Model | 6173 |
More information #ad
2. LOSTRONAUT
#ad2.5 Inch x 10 Feet Dust Collection Hose, Reinforced With Coated Wire Helix, Flexible Clear PVC Heavy Duty Puncture Resistant Dust Debris Fume Hoses
#adMore information #ad
Universal reinforced duct hose is wrapped around PVC coated high carbon steel wire helix, easy to ground if desired. Transparent walls to easily spot obstructions in your vacuum dust collectors system, great for sawdust powder, debris and ventilation.| Brand | LOSTRONAUT #ad |
| Manufacturer | LOSTRONAUT #ad |
More information #ad
3. Peachtree Woodworking Supply
#ad2-1/2 x 10' Ultra Flex Clear-Vue Heavy Duty PVC Hose, MADE IN USA!
#adWhen setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. The hose has a compression ratio of 3: 1. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
More information #ad
This pvc hose checks all of those boxes and more! This pvc hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Clear vue to see any type of obstruction. The clear hose wraps around a black carbon steel wire helix that reinforces the hose to keep it from kinking and is capable of an electrostatic discharge when properly grounded at both ends of the hose. It must also perform under the constant use and abuse of an everyday workshop environment. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. Pvc hose depending on diameter can be used with dust collectors, industrial vacuum systems, shop vacuums, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go.
| Brand | Peachtree Woodworking Supply #ad |
| Manufacturer | Fulton Clear Vue #ad |
| Height | 2.5 Inches |
| Length | 120 Inches |
| Weight | 2.71 Pounds |
| Width | 2.5 Inches |
| Part Number | FBA_6165 |
| Model | FBA_6165 |
More information #ad
4. Fulton
#ad2 1/2" x 20' Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2" Ports. Ideal for Shop Vacuums
#adWhen setting up our dust collection or filtration systems we tend to have a lot of “moving parts” during this process and trying to figure out what type of line, piping or hose to use can be challenging. Pvc hose can be used as a primary line or can be plugged into and out of machinery as needed.
More information #ad
Pvc hose depending on diameter can be used with dust collectors, industrial vacuum systems, shop vacuums, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses. The pvc hose flexes enough to weave in and out of shop machinery or table legs without kinking. The hose has a compression ratio of 3: 1. Typically, pvc hose works best as a dust collection hose for woodworking applications where dust and chips from cutting, milling or sanding wood is a problem. Dust collection hoses need to be not only long enough, flexible and sturdy enough, but it must be durable, so it won’t completely collapse in use.
| Brand | Fulton #ad |
| Manufacturer | Peachtree Woodworking Supply Inc #ad |
| Height | 6 Inches |
| Length | 14 Inches |
| Weight | 5 Pounds |
| Width | 14 Inches |
| Part Number | 368 |
| Model | 368 |
More information #ad
5. POWERTEC
#adPOWERTEC 70136 4-Inch Hose to 2-1/2 Inch Hose Cone Reducer
#adThe 2-1/2 in. Dimensions: 4” nominal od end measures 3-61/64” od and 3-41/64” id; 2-1/2” nominal OD end measures 2-15/32” OD and 2-9/32” ID.
More information #ad
Premium: made with high quality ABS plastic for long-term durability and to withstand the abrasive nature of workshop dust collection. Includes: 4” to 2 1/2” Dust Collection Hose Reducer. Function: a handy double sided adapter that allows you to step down from your larger 4” dust collection hose to a smaller 2-1/2 shop vacuum hose branch line.| Brand | POWERTEC #ad |
| Manufacturer | Southern Technology LLC #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.2 Pounds |
| Width | 4 Inches |
| Part Number | 70136 |
| Model | 70136 |
More information #ad
6. POWERTEC
#adPOWERTEC 70240 PVC Dust Collection Hose 2-1/2 Inch x 50 Feet | Left Spiral Flexible Clear View Heavy Duty PVC Hose
#adMore information #ad
Made from high quality PVC for durability, strength and easy installation. Ideal for an assortment of sawdust collectors, air conditioning indoor ventilation ducts and 2-1/2” PVC dust collection systems for woodworking applications.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 6 Inches |
| Length | 21 Inches |
| Width | 21 Inches |
| Part Number | 70240K |
| Model | 70240 |
More information #ad
7. Peachtree Woodworking
#ad2 1/2" x 10' CLEAR PVC DUST COLLECTION HOSE BY PEACHTREE WOODWORKING PW367
#adMore information #ad
Tight bending radius allows you to maneuver the hose anywhere in your shop. Hose is clear so you can see directly inside to spot any kind of obstruction.| Brand | Peachtree Woodworking #ad |
| Manufacturer | ECTY #ad |
| Height | 3 Inches |
| Length | 12 Inches |
| Width | 12 Inches |
| Part Number | 367 |
| Model | 367 |
More information #ad
8. GSM Brands
#adPVC Dust Collection Hose 2.5 Inch Diameter x 20 Feet Length
#adMoney back guarantee - we are confident that you will have a great experience with this hose. Tough: 20 feet of sturdy pvc is puncture resistant, won't collapse under your dust collector pressure and our design offers a tight bend radius so you can reach into tight spaces with ease.
More information #ad
Smart: our 2. 5" pvc hose is wrapped around steel wire, which makes it easily grounded. Simple: a translucent hose helps quickly identify the location of any blockages so you can get back to work.| Brand | GSM Brands #ad |
| Manufacturer | GSM Brands #ad |
More information #ad
9. POWERTEC
#adPOWERTEC 70198 2-1/2-Inch Flexible Dust Collection Hose 36-Inch Long, 2-1/2-Inch, black
#adIncludes: 2-1/2” left Spiral Dust Collection Hose.
More information #ad
Universal: whether used as a main line or extension, this hose fits and accommodates all dust collectors when properly connected. Premium build: features an all-black construction and is made out of polypropylene – offering high flexural strength, durability and chemical/moisture resistance. Ultra-flex: hose offers superb flexibility for maneuvering around your workshop and machinery.| Brand | POWERTEC #ad |
| Manufacturer | POWERTEC #ad |
| Height | 3 Inches |
| Length | 10 Inches |
| Weight | 0.48 Pounds |
| Width | 3 Inches |
| Part Number | 70198 |
| Model | 70198 |
More information #ad
10. LOSTRONAUT
#ad2.5 Inch x 5 Feet Dust Collection Hose, Includes Clamps, Coated Wire Helix Reinforced, Flexible Clear PVC Contractor Grade Puncture Resistant Dust Debris Fume Hoses
#adMore information #ad
2 - 1/2 '' x 5' puncture resistant, heavy-duty hose no collapse, tear or kink, Includes 2 stainless steel key hose clamps.100% satisfaction guaranteed - 30-day return policy + 12-month warranty. Ultra-flexible tight bending radius to easily outfit your workshop woodworking studio with a dust collector system.| Brand | LOSTRONAUT #ad |
| Manufacturer | LOSTRONAUT #ad |
| Part Number | 255PVCDCHSUP1 |
More information #ad
