Top 10 DownCut Spiral Router Bits 1/2 Shank – Spiral Router Bits

As an Amazon Associate I earn from qualifying purchases.

1. SpeTool

#ad

SpeTool Spiral Downcut Router Bits with 3/8 inch Cutting Diameter, 1/2 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut, Carving

#ad
SpeTool #ad - The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet. Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The cnc end mill for plywood, mDF, oak, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance.
BrandSpeTool #ad
Manufacturerspetool #ad
Part NumberSP-D3/8-1/2-D

2. SpeTool

#ad

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance. Solid carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length. The cnc end mill for plywood, oak, mDF, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/2” collet.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/2-1/2-D

3. Whiteside Router Bits

#ad

Whiteside Router Bits RD5200T Three Flute with Spiral Bit, Down Cut Solid Carbide 1/2-Inch Cutting Diameter and 2-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height6 Inches
Length3 Inches
Width4.5 Inches
Part NumberRD5200T
ModelRD5200T

4. SpeTool

#ad

Carving, SpeTool Spiral Router Bits with UpCut 3/8 inch Cutting Diameter, 1/2 Inch Shank HRC55 Solid Carbide CNC End Mill for Wood Small Cut

#ad
SpeTool #ad - Solid carbide spiral router bit with 1/2inch shank and 3/8inch cutting diameter, 5/4 inch cutting length, 3 inch for total length. The cnc end mill for plywood, mdf, oAK, and any hardwood working and Long service life for sharp. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. Industrial quality control to ensure best performance. Spiral bits used for smoothly downcut groove and slots, Cycles and dados leave with clean edge and top surface, Mortises, better than straight bits.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-3/8-1/2-U

5. Freud

#ad

Freud 3/8" Dia. Solid Carbide Up Spiral Bit with 1/2" Shank 75-106,Silver

#ad
Freud #ad - Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Overall dia. Excellent for grooves and dadoes in all composite materials, plywoods, hardwoods and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. D 3/8", 2 flutes, cutting length h 1-1/4", 1/2" Shank.
BrandFreud #ad
ManufacturerFreud #ad
Height1 Inches
Length1 Inches
Weight0.15 Pounds
Width1 Inches
Part Number75-106
Model75-106

6. SpeTool

#ad

1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, Carving

#ad
SpeTool #ad - Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits. Industrial quality control to ensure best performance. The route bit suit for cnc router and Makita, Bosch, and any brand plunge router with 1/4” collet. The cnc end mill for plywood, oAK, mdf, and any hardwood working and Long service life for sharp. Solid carbide spiral downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
BrandSpeTool #ad
ManufacturerSpeTool #ad
Part NumberSP-D1/4-1/8-D

7. Whiteside Router Bits

#ad

Whiteside Router Bits RD5125T Three Flute with Spiral Bit Down Cut Solid Carbide 1/2-Inch Cutting Diameter and 1-1/4-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Industrial Quality. Precision ground for proper balance at high RPM. Whiteside router Bits are made with Premium Carbide.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRD5125T
ModelRD5125T

8. Whiteside Router Bits

#ad

Whiteside Router Bits RD5150 Standard Spiral Bit with Down Cut Solid Carbide 1/2-Inch Cutting Diameter and 1-1/2-Inch Cutting Length

#ad
Whiteside Router Bits #ad - Whiteside router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
BrandWhiteside Router Bits #ad
ManufacturerWhiteside #ad
Height5.5 Inches
Length2 Inches
Width3 Inches
Part NumberRD5150
ModelRD5150

9. Amana Tool

#ad

Amana Tool 46403 SC Spiral Plunge 1/16 D x 1/2 CH x 1/4 SHK x 2 Inch Long Down-Cut Router Bit

#ad
Amana Tool #ad - B cutting height: 3/4. D diameter: 3/16. D shank: 1/4. Overall length l: 2-1/2 Flutes: 2. Direction: Down-Cut.
BrandAmana Tool #ad
ManufacturerAmana Tool #ad
Weight0.04 Pounds
Part Number46403
Model46403

10. EANOSIC

#ad

Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving, EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, 2” Cutting Length, Extra Long 4 inch, 1/2” Cutting Diameter

#ad
EANOSIC #ad - And also for carbon steel, OAK, soft alloy steel, cast iron, aluminum alloy. End mill bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, end milling, better than straight bits.

The cnc end mill router bits apply to various wood: such as plywood, tool steel, MDF, and any hardwood working and Long service life for sharp. Premium quality: the spiral upcut router bits Made of solid carbide Tungsten steel, it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time. The router bit suit for CNC router and any plunge routers with 1/2" collet. Spiral bits used for side milling, finish machining, etc. Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
BrandEANOSIC #ad
ManufacturerEANOSIC #ad
Part NumberTungsten steel-4 inch