Top 10 Circular Saw Guide Clamp – Edge Clamps

As an Amazon Associate I earn from qualifying purchases.

1. Peachtree Woodworking Supply

#ad

ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots 50 inch Clamp

#ad
Peachtree Woodworking Supply #ad - No more c-clamps when trying to secure a straight edge to your large or small wooden panels! cut large panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, small panels, they are super easy to align and even easier to clamp into place. Once secured, the progrip straight edge guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, each position provides varying amounts of pressure.

How does it work? each progrip straight edge guide clamp has one adjustable jaw and one fixed jaw. The low profile has also been designed with guide accessories in mind. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever. Cut straight, routers, trim routers, true lines with circular saws, jig saws and many other power tools you probably own.

Each clamp is identified by the maximum clamping distance between jaws. Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The lock lever on each clamp can be secured into one of three positions, you may need to apply more pressure by securing the lock lever to the appropriate position. Depending on your project or application, smooth cuts every time! Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board.
BrandPeachtree Woodworking Supply #ad
ManufacturerPeachtree Woodworking Supply Inc. #ad
Part Number591

2. KREG

#ad

Circular Saw Track Circular Saw Track

#ad
KREG #ad - Rip, mdf, and make angled cuts up to 50" Long in plywood, crosscut, and panels. Prevent splintering with anti-chip strips that support material during the cut. Hold track in place without clamps thanks to anti-slip guide strips. Begin cuts easily with a starting block that the supports saw and allows normal blade guard operation,. Simply align the guide Track with your marks to make accurate cuts.
BrandKREG #ad
ManufacturerKreg #ad
Height2.5 Inches
Length27.5 Inches
Weight5.05 Pounds
Width8.75 Inches
Part NumberKMA2700
ModelKMA2700
Warranty90 day warranty

3. Peachtree Woodworking Supply

#ad

ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots All 3 Clamps 24, 36 and 50 inch

#ad
Peachtree Woodworking Supply #ad - These clamps are ideal for cutting large sheets of plywood in half with a 50” straight edge guide. How does it work? each progrip straight edge guide clamp has one adjustable jaw and one fixed jaw. Each progrip straight Edge Guide has the exact same profile regardless of length. Another great application for these clamps is cutting dado slots for bookshelves.

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! cut large panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, small panels, they are super easy to align and even easier to clamp into place. The low profile has also been designed with guide accessories in mind. Depending on your project or application, the proGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time! Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The fixed jaw typically will go against the edge of the board closest to you. Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. Once secured, each position provides varying amounts of pressure.
BrandPeachtree Woodworking Supply #ad
ManufacturerProGrip #ad

4. Bora

#ad

544050, Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting Length

#ad
Bora #ad - Winner of the 2019 pro tool innovation Award PTIA in the Track Rail category. Clamping end moves with handle for easy adjustability from one side. Easily increase length up to 100 in. By adding the bora NGX 50-inch aluminum extension. Made of heavy-gauge, rigid aluminum for extreme durability. Locking handle grabs work surfaces for a secure grip that won’t budge.
BrandBora #ad
ManufacturerBora #ad
Height2 Inches
Length58 Inches
Width3 Inches
Part Number544050
Model544050
Warranty1 year

5. Bora

#ad

Includes: 24-Inch & 50-Inch WTX Clamp Edges, Saw Plate -545410, BORA 4-pc WTX Deluxe Set, 50-Inch Extension

#ad
Bora #ad - Locking handle grabs work surfaces for a secure edge that won't budge. Replacement set for BORA 543400 4-piece set. Fits right- and left-handed circular saws. Wtx clamp edge is made of heavy-gauge, extruded aluminum for extreme durability. Includes 24-inch & 50-inch wtx clamp Edges, 50" Extension with connectors, Saw Plate. Adjustable channel on saw plate fits a wide variety of straight edges up to 3. 5” wide. Ruled extrusion allows for easy measurements.
BrandBora #ad
ManufacturerBora #ad
Weight7 Pounds
Part Number545410
Model545410

6. Bora

#ad

Contractors, Carpenters and DIY, Bora 50” WTX Ruled Clamp Edge Saw Guide for Woodworking, 50 Inch Cutting Length, Guide for Circular Saws, 545050

#ad
Bora #ad - The locking handle grabs surfaces for a secure edge that won't budge while you cut. 50 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge. Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches.

Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.

It’s long 50-inch length allows you to saw with precision and skill. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height1.5 Inches
Length62.2 Inches
Weight2 Pounds
Width3 Inches
Part Number545050
Model545050
Warrantyone year limited

7. Bora

#ad

24" Cutting Length, 544024, Bora 30.1" NGX Clamp Edge, Straight Cut Guide For Circular Saws

#ad
Bora #ad - Part of entire ngx clamp Edge System to cut and rip sheets and boards. Clamping end moves with handle for easy adjustability from one side. Use with circular saws, routers, jig saws, and other portable power tools. Locking handle grabs work surfaces for secure grip that won’t budge. Easily increase length with 50 inch extension; Made of heavy-gauge, rigid aluminum for extreme durability. 24 inch cutting capacity.
BrandBora #ad
ManufacturerBora #ad
Height2 Inches
Length32 Inches
Width3 Inches
Part Number544024
Model544024
Warranty1 year

8. Bora

#ad

Bora 100-Inch NGX Clamp Edge, 544100, Straight Cut Guide For Circular Saws Includes 50-Inch Clamp Edge & 50-Inch Extension For 100-Inch Cutting Length

#ad
Bora #ad - Locking handle grabs work surfaces for a secure grip that won’t budge. Includes bora ngx 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors. Use with circular saws, Jig saws, routers, and other portable power tools. Made of heavy-gauge, rigid aluminum for extreme durability. Clamping end moves with handle for easy adjustability from one side.
BrandBora #ad
ManufacturerBora #ad
Height0.75 Inches
Length100 Inches
Weight4 Pounds
Width3 Inches
Part Number544100
Model544100
Warranty1 year

9. Bora

#ad

Guide for Circular Saws, 100 Inch Cutting Length, Contractors, 545100, Carpenters and DIY, Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking

#ad
Bora #ad - Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track.

Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. It’s long 100-inch length allows you to saw with precision and skill. The locking handle grabs surfaces for a secure edge that won't budge while you cut. 100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts.

With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.
BrandBora #ad
ManufacturerAffinity Tool Works #ad
Height1.38 Inches
Length62.75 Inches
Weight3 Pounds
Width3 Inches
Part Number545100
Model545100

10. Deadwood Crafted Tools

#ad

36in / 91cm – Circular, Jig, DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, Router, Rotary

#ad
Deadwood Crafted Tools #ad - Built to last: constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip.

Wide range: scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 36 inches/91cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut. Easy to use: there are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, adjust the clamp to the wood, pull the sliding clamp apart until you hear a click, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place.

All-in-one: you get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 45” x 2. 1” x 05” inches 114. 3cm x 5. 3cm x 1.
BrandDeadwood Crafted Tools #ad
ManufacturerDeadwood Crafted Tools #ad
Height3.2 Inches
Length1.5 Inches
Weight3.04 Pounds
Width45.3 Inches
Part Number9121
WarrantyThis product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.