As an Amazon Associate I earn from qualifying purchases.
Bora #ad - Includes: 50-inch ngx clamp edge, saw plate, 2 track clamps, 2 rolls of non-chip strip, 50-inch NGX Extension with connectors, T-Square Accessory. Includes 50” clamp edge and 50” extension for 100” cutting capacity.
Bora #ad - Non-marking grip: each track clamp has rubberized feet that hold tight to your material without leaving damaging indentations. Versatile: sturdy construction makes them perfect for use as a work stop, a vise, or to increase your holding power.
Easily tighten or adjust the clamp with the speed nut and lock it in place. Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.
Bora #ad - Now you can confidently make multiple cuts at once. Use with left- and right-hand saws: securely fit most left- and right-hand circular saws to the BORA Saw Plate and Rip Guide. Save time: the rip guide by bora will eliminate the need for marking and measuring each cut.
Stability: large ergonomic rip Guide handle ensures a solid grip. Precise rip cuts and crosscuts: get straight accurate rip cuts and crosscuts up to 24 inches 610mm wide on the sheet material you are breaking down.
Repeatable accuracy: the bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time. Lock in your measurement and saw for accurate cuts every time. Easy setup: three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time.
Bora #ad - Low profile front clamps allow a greater range of placement. Friction fit cut indicator doesn't require tools to adjust or lock in place. Secure - 3 points of contact means your saw is held securely while cutting.
Bora #ad - For big projects, easily increase the length up to 100 in. Use with any circular saw: this guide is compatible with any brand of circular saw, not just BORA tools. Clamps firmly: this straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project.
By adding the bora NGX 50-inch aluminum extension.
Circular saw guide for large sheets: the BORA clamp edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. Its durable construction and precision engineering ensure an accurate cut every time. Premium quality: the bora clamp edge straight cut guide is designed for heavy-duty use in the toughest conditions.
Bora #ad - Time saver: the bora wtx ruled clamp edge saw guide makes it quick and easy to achieve straight, jigsaw, precise cuts when cutting plywood sheets or MDF with a circular saw, or router.
Easily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension sold separately. Fast set-up: adjust the gripping clamp end to the desired length, lock it in place, and start cutting. Extreme durability: made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
Bora #ad - As long as you need – modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. Get it straight – this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track.
With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in - the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
Bora #ad - Saw can be used for free hand cutting with the circular saw plate attached. Clamps to most circular saws for track saw like precision. Fits right and left handed circular saws.
The adjustable channel ensures it fits a wide variety straight edges guides up to 3 1/2" wide. Fits right and left handed circular saws. Works directly with the borA WTX, WT and Original Clamp Edge Series.
Bora #ad - Cut any angle: attach the additional two Track Clamps to the Clamp Edge for pro level angle cutting capability. Stop the guesswork: effortlessly attach the ngx saw plate to your right- or left-handed saw with the adjustable quick-release clamps.
Reduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. And for big projects, increase the length up to 100 inches with the NGX 50” aluminum extension.
Track saw precision: making straight cuts with a circular saw, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, or jigsaw is a challenging task, router, accurate cuts every time. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
Bora #ad - Suited for your needs: the modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. Make measuring easy: the wtx clamp edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy.
100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts.
With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. The locking handle grabs surfaces for a secure edge that won't budge while you cut. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
1. Bora
#ad544600K, Bora NGX 6-Piece Premier Set, Straight Cutting Saw Guide Accessories for Circular Saw
#adMore information #ad
Clamping end on straight edge moves with handle for easy adjustability from one side. Locking handle grabs work surfaces for secure grip that won’t budge. Made of heavy-gauge, rigid aluminum for extreme durability.| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Weight | 10.98 Pounds |
| Part Number | 544600K |
| Model | 544600K |
| Warranty | Manufacturer Warranty |
More information #ad
2. Bora
#adSecurely Cut Any Angle w WTX and NGX Clamp Edge Systems, BORA Track Clamps, DIY, Saw Guide Accessory for Woodworking, Two-Pack, 542011, Carpentry
#adEasily tighten or adjust the clamp with the speed nut and lock it in place. Solid, secure hold: the strong quick clamping mechanism grips wood of varying thickness, so you can make angled cuts without worrying that your straight edge will come loose.
More information #ad
Easy set up: attach the track clamp to the top or bottom of the rail for maximum grip. Cut any angle: bora track clamps can be used with the WTX and NGX Clamp Edge Systems to make cutting any angle fast, simple, and accurate.| Brand | Bora #ad |
| Manufacturer | Bora Portamate #ad |
| Height | 1 Inches |
| Length | 14 Inches |
| Weight | 0.5 Pounds |
| Width | 7 Inches |
| Part Number | 542011 |
| Model | 542011 |
| Warranty | 1 year |
More information #ad
3. Bora
#adBORA Cutting System Rip Guide for Circular Saws, 544008, BORA Rip Guide with Saw Plate + Rip Handle
#adStability: large ergonomic rip Guide handle ensures a solid grip. Precise rip cuts and crosscuts: get straight accurate rip cuts and crosscuts up to 24 inches 610mm wide on the sheet material you are breaking down.
More information #ad
The aluminum rail attaches securely to the Saw Plate for confident cuts. Repeatable accuracy: the bora Rip guide allows you to make repetitive rip cuts and crosscuts, while improving your accuracy and saving you time. Lock in your measurement and saw for accurate cuts every time. Easy setup: three simple steps and your Rip Guide is set up! The Saw Plate stop allows you to quickly setup your saw every time.
| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 2.33 Pounds |
| Width | 0 Inches |
| Part Number | 544008 |
| Model | 544008 |
More information #ad
4. Bora
#adBora Saw Guide 544006
#adMore information #ad
Replaces bora saw plate - 542006. Improved front fence minimizes side to side tool movement. New side stop allows you to replace the tool in exactly the same place, every time. Works with the bora wtX Clamp edges and Bora NGX clamp edges. Versatile - fits right- and left-handed circular saws.| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 14 Inches |
| Length | 8 Inches |
| Weight | 1.05 Pounds |
| Width | 2 Inches |
| Part Number | 544006 |
| Model | 544006 |
More information #ad
5. Bora
#adGreat for Cross-Cutting Plywood Sheets and Routing Dados, BORA 50” NGX Clamp Edge, 544050, Straight Cut Guide for Circular Saws, Easy to Use
#adBy adding the bora NGX 50-inch aluminum extension.
More information #ad
Extreme durability: made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use. Use it with circular saws, routers, and jigsaws. Circular saw guide for large sheets: the BORA clamp edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw. Its durable construction and precision engineering ensure an accurate cut every time. Premium quality: the bora clamp edge straight cut guide is designed for heavy-duty use in the toughest conditions.
| Brand | Bora #ad |
| Manufacturer | Bora #ad |
| Height | 2 Inches |
| Length | 58 Inches |
| Width | 3 Inches |
| Part Number | 544050 |
| Model | 544050 |
| Warranty | 1 year |
More information #ad
6. Bora
#adContractors, 545050, Cutting Track for Woodworking, 50 Inch Length Rail for Circular Saws, DIY, BORA WTX Ruled Clamp Edge Saw Guide
#adEasily increase the length up to 100 inches by adding the BORA NGX 50-inch aluminum extension sold separately. Fast set-up: adjust the gripping clamp end to the desired length, lock it in place, and start cutting. Extreme durability: made of heavy-gauge, extruded aluminum it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use.
More information #ad
Ruled straight edge: the top edge of the clamp includes a ruler imprint with both metric and imperial measurements to guarantee your cuts are always the right size. Long cutting length: this 50” guide rail is long enough for large and wide sheet material and can be used with all types of saws.| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Height | 1.5 Inches |
| Length | 62.2 Inches |
| Weight | 2 Pounds |
| Width | 3 Inches |
| Part Number | 545050 |
| Model | 545050 |
| Warranty | one year limited |
More information #ad
7. Bora
#adBora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 24-Inch Cutting Length, 543024
#adWith the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. Locked in - the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
More information #ad
Contractor’s companion - this tool is made for use with the Bora WTX Saw Plate sold separately, jig saws, routers, and can be conveniently paired with your own circular saws, and other power tools. Its long 24 inch length allows you to saw with precision and skill. The locking handle grabs surfaces for a secure edge that won't budge.| Brand | Bora #ad |
| Manufacturer | Affinity Tools #ad |
| Height | 1.5 Inches |
| Length | 40 Inches |
| Weight | 1 Pounds |
| Width | 3 Inches |
| Part Number | 543024 |
| Model | 543024 |
More information #ad
8. Bora
#adPrecise Cuts. Easily Rip Plywood or Other Sheet Material to Your Exact Specifications and Measurements, Bora 542006 WTX Saw Plate – The Easy to Use Saw Sled / Circular Saw Guide That Ensures Straight
#adThe adjustable channel ensures it fits a wide variety straight edges guides up to 3 1/2" wide. Fits right and left handed circular saws. Works directly with the borA WTX, WT and Original Clamp Edge Series.
More information #ad
Use with your circular saw to cut with unmatched precision. Easy to use, yet extremely secure, with three points of connection to saws. Convenient - your saw can still be used for free hand cutting with the plate attached. Keeps and guides your circular saw straight and true while cutting, without wobble or binding. Sled measures 8" x 14" x 7/8".| Brand | Bora #ad |
| Manufacturer | Affinity Tools #ad |
| Height | 2 Inches |
| Length | 15 Inches |
| Weight | 1.4 Pounds |
| Width | 9 Inches |
| Part Number | 542006 |
| Model | 542006 |
More information #ad
9. Bora
#adBORA 5-Piece NGX Clamp Edge System Set For Making Precision Cuts, 50-inch Extension, Includes 50-inch Clamp Edge, Non-Chip Strip, Track Clamps, Pro Saw Plate, 544500
#adReduce tear out: prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. And for big projects, increase the length up to 100 inches with the NGX 50” aluminum extension.
More information #ad
Attach it to the bottom of the NGX Clamp Edge for a smooth finish. 100” of cutting capacity: the ngx 50” clamp edge is made of heavy-gauge, like a rip cut on a 4x8, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. Track saw precision: making straight cuts with a circular saw, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, or jigsaw is a challenging task, router, accurate cuts every time. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.
| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 10 Pounds |
| Width | 0 Inches |
| Part Number | 544500 |
| Model | 544500 |
More information #ad
10. Bora
#adCarpenters and DIY, Bora 100” WTX Ruled Clamp Edge Saw Guide for Woodworking, Contractors, 100 Inch Cutting Length, 545100, Guide for Circular Saws
#ad100 inches of cutting: with your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts.
More information #ad
It’s long 100-inch length allows you to saw with precision and skill. Get it straight every time: this rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Additonal accessories: the bora wtx saw guide System has additional accessories include the Saw Plate, Track Clamps for cutting any angle, and the Router Guide. With the wtx clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts. The locking handle grabs surfaces for a secure edge that won't budge while you cut. Locked in: the adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood.
| Brand | Bora #ad |
| Manufacturer | Affinity Tool Works #ad |
| Height | 1.38 Inches |
| Length | 62.75 Inches |
| Weight | 3 Pounds |
| Width | 3 Inches |
| Part Number | 545100 |
| Model | 545100 |
More information #ad
