Top 10 Bit Organizer Case – Tool Bags

As an Amazon Associate I earn from qualifying purchases.

1. AISENIN

#ad

Socket Set（Tools not Included, AISENIN Tool Roll Organizer Rolling Tool Bag Pouch for Drill Bits

#adAISENIN #ad - Keep all your tools organized - Multiple pockets can be used to organize your tools, various drill bits and sockets. Esay to roll and carry -two elastic strap closure fastens your tool roll organizer when roll up, not fall drop out. Aisenin best guarantee - aisenin offers life time warranty on our tool roll organizer, guarantee with 100% satisfaction service. 600d polyester. Roll too bag size - unrolled dimensions 18*9 inches L*W. An internal elastic strap protecting and organizing your tools both fold and unfold.

Brand	AISENIN #ad
Manufacturer	AISENIN #ad

2. Neiko

#ad

NEIKO 02449A Hex Bit Holder Rack with Strong Magnetic Base | 37 Hole Bit Storage | 1/4 Inch Hex Bit & Drive Bit Adapter Storage | Screwdriver Bit Organizer | Toolbox Organizer | Driver Bit with Magnet

#adNeiko #ad - No more hard to find loose bits in your tool bag. Low profile: measuring only 1-1/4" x 7" x 13/16 inches this slim and sleek design allows this small bit organizer to be a perfect fit in any toolbox for portability and easy identification for all your loose bits.

Storing your hex bits while allowing efficient workflow operation. Magnetic base: a strong magnetic base with rubber coating that attaches to metal surfaces like your tool box, tool chest, tool cart or car without leaving scratches or marks. Powerful ferrite magnet base coated in a rubber base. Secure storage: each bit hole is designed with magnetized components to keep you quarter inch bits secured and safe within the organizer to prevent them getting lost. Durable: this open bit case is constructed of high quality, heavy duty, and impact resistant polypropylene plastic for a long lasting life in your workshop or garage.

Even when flipped upside down this magnetic tool holder will not drop your bits. This magnetic screwdriver bit holder keeps all your Phillips, or torx bits in one place. Open top: this hex bit organizer allows easy to access quick bit changes for alternating, removing, slotted, flathead, or replacing pieces when using a power drill or screw gun.

Brand	Neiko #ad
Manufacturer	Neiko #ad
Part Number	02449A
Model	02449A

3. BOSCH

#ad

BOSCH CCSCL Large Case for Custom Case System Case Only

#adBOSCH #ad - Durable case : features a secure case latch and rubber bumpers. Tilt in tilt out case mechanism : allows easier access to bits. Driver bit xtended torsion zone – helps to absorb high-torque of new impact drivers not included. Customized storage configuration : provides efficiency, so the right bit is always at hand. Impact tough design : both driver bits and drill bits are impact rated and provide longer bit life than standard impact bits not included.

Brand	BOSCH #ad
Manufacturer	Bosch #ad
Height	10 Inches
Length	1.65 Inches
Weight	0.68 Pounds
Width	9.25 Inches
Part Number	CCSCL
Model	CCSCL

4. Enkay

#ad

Enkay 3030 Screw Bit Holder, Poly Bag

#adEnkay #ad - Made of flexible plastic material. Country of Origin:China. Holds up to 32 1/4-inch hex shank screw bits and 1 - 2 1/2-inch bit holder. Poly bagged with header.

Brand	Enkay #ad
Manufacturer	Enkay #ad
Height	3 Inches
Length	5 Inches
Weight	0.02 Pounds
Width	3 Inches
Part Number	3030
Model	3030

5. CASOMAN

#ad

Hardware Box Storage, CASOMAN Double Side Tool Organizer with Impact Resistant Polymer and Customizable Removable Plastic Dividers, Excellent for Screws,Nuts,Small Parts, 34-Compartment, Black/Orange

#adCASOMAN #ad - Double side design with professional looking. The top handle can easy to carry the storage organizer. The fixed sections add an extra space for special need. Including total 24 removable dividers and 4 fixed sections.

Made of durable and heavy duty plastic material. Approximate outer box dimensions 12. 6” l x 106” w x 3” h, approximate adjustable compartment size 2. 56” l x 2. 36” w. This handy and versatile container is perfect for parts, electrical connectors, hair accessories, bead storage, bolts, nails, fasteners, fishing tackle, screws, nuts, and various other smaller construction items.

Two secure latches can open and close smoothly to prevent the inner items fall off while carrying. An attractive color combination in black body, clear lids, orange closure and divider pieces. Features the transparent cover allows you to see everything at a glance. All removable dividers are easily slide on and off to customize the storage space.

Brand	CASOMAN #ad
Manufacturer	CASOMAN #ad
Height	2.95 Inches
Length	12.48 Inches
Weight	320 Grams
Width	10.47 Inches
Part Number	CS078
Model	CS078

6. Toolcool

#ad

Toolcool 10pcs 12 Holes Hex Shank Screwdriver Bit Holder Plastic Screwdriver Head Storage Case

#adToolcool #ad - Compact design, small size, not occupying space and easy to carry. This hex bit organiser is a good assistant, helps maintain a tidy workstation, avoid confusion and loss of gadgets. It can be inserted 12 pieces 1/4 inch hex shank bits, easier to find the bit size you need, never worry about the loss of the bits. Made of plastic, durable and lightweight. Organize your screwdriver bits and drill bits easily with this holder.

Brand	Toolcool #ad
Manufacturer	Toolcool #ad
Height	0.59 Inches
Length	3.8 Inches
Weight	0.02 Pounds
Width	0.39 Inches
Part Number	TC0705

7. VEVOR

#ad

Drill Bit Organizer Cabinet, Three-Drawer Drill Bit Dispenser, Drill Dispenser Organizer Cabinet for Jobber Length Fractional Size 1/16" to 1/2" in 1/64" Increments, VEVOR Drill Bit Dispenser Cabinet

#adVEVOR #ad - Stackable system: units can be stacked with other wire gauge/letter/metric dispensers. Just stack it up. Efficient storage organizer: this three-drawer 29-compartment drill bit dispenser can easily store collections of drills. Sturdy material: the drill dispenser cabinet is constructed from thickened 004"/1.

0 mm cold-rolled steel, with an orange-figured paint finish for good gloss and high strength. The electroplating process enables its warp-proof, rust-proof, and corrosion-proof. User experience: our drill bit dispenser’s ball-bearing design features easy drawer slides for long useful life, with buffer pads relieving noises. Widened handles and smooth edges are without burr and no injury to hands. This clear design fits any style.

You could stack dispenser organizer cabinets or use them individually to save precious storage space. The labeled compartments provide quick identification and organization. The drill dispenser organizer cabinet is ideal for safe storage and easy access/organization of your tools. Ultimate versatility: our cutting tool organizers provide storage, organization, and quick size identification for drill bits. It holds a package of jobber length drill bits in metric sizes 1/16"-1/2"/1. 59-12.

Brand	VEVOR #ad
Manufacturer	VEVOR #ad
Height	9.5 Inches
Length	15.8 Inches
Weight	14.9 Pounds
Width	10.2 Inches
Part Number	sctztfpx11612
Model	VV-DC-11612

8. MiguCo

#ad

10pcs 12 Holes Screwdriver Bit Holder Drill Head Storage Case

#adMiguCo #ad - Organize your screwdriver drill heads easily with this holder. Material: plastic; Type of Hole: Hex. It can be inserted 12 pieces 6. 35mm/ 1/4" standard bits. Quantity: 10pcs. Size of hole: 6. 35mm/ 1/4"; hole: 12 Hole.

Brand	MiguCo #ad
Manufacturer	MiguCo #ad
Part Number	SDH1012

9. OEMTOOLS

#ad

3 Piece | Comes with an 11” Nine-Compartment Tool Tray & Two 5.5” Six-Compartment Trays | Removable Dividers Let You Customize Your Storage, OEMTOOLS 22186 Tool and Parts Organizer Set

#adOEMTOOLS #ad - Perfect for travel: the largest piece in this set features a convenient carrying handle so you can take it everywhere. Protected by: if something happens to your tool and parts organizer set during normal, everyday use, then there’s no need to worry.

This tool is covered by the OEMTOOLS 90 Day. All your storage needs: for a variety of tools, this small tool box organizer is perfect to keep them organized and in easy reach. Customizable design: Each tool organizer comes with a removable divider for customized configurations. See product manual for full conditions and restrictions. Easy identification: each piece in this small part organizer comes with a clear top so you can easily identify each part between the convenient dividers in each container.

Brand	OEMTOOLS #ad
Manufacturer	OEMTOOLS #ad
Height	4.75 Inches
Length	11 Inches
Weight	0.12 Pounds
Width	7.5 Inches
Part Number	22186
Model	22186
Warranty	OEMTOOLS 90 Day

10. Ernst Manufacturing

#ad

Ernst Manufacturing Bit Boss High-Density Bit Organizer for Vertical or Horizontal Storage, 90 Tool, High-Visibility with Push Button Release Model 5720HV

#adErnst Manufacturing #ad - 9 by 3. Complete bit organizer system for either tool boxes or both vertical and horizontal storage; great for both professional and home tool organization. 6 by 1. Makes your tools easy to find, easy to remove for use, and easy to replace; holds three 3/8-inch chucks. Measures 14. Perfect for storage in the drawer, on the bench, or on the go; holds 90 small, medium, and long bits bits not included. Taper-lock design secures wide range of sizes with push button release to remove individual rails. 2 inches; made in the USA; lifetime.

Brand	Ernst Manufacturing #ad
Manufacturer	Ernst Manufacturing #ad
Height	1.2 Inches
Length	14.9 Inches
Weight	0.76 Pounds
Width	3.63 Inches
Part Number	5720HV
Model	5720HV
Warranty	Lifetime component replacement guarantee