As an Amazon Associate I earn from qualifying purchases.




All 12-inch models of luxite saw rip saw blades are created and tested for quality assurance entirely in the United States. The blade makes aggressive yet clean cuts in soft, hard and exotic woods, as well as particle board and other non-laminated composites using additional gullet depth, an extreme 20-degree hook angle and a staggered tooth layout.



Double hard and 40% stronger c-4 carbide will give up to 300% longer life between sharpening. With this one all purpose blade you can rip and crosscut 1 inch to 2 inch ROCKHARDS and SOFTWOODS resulting in a smooth-as-sanded surface.


X 2 in. For easy and stable material support. Table size: 28-3/4 in. Table capacity: 35-in to the right and. Cut capacity: capable of a 3-1/8 in. Working table size: with out feed support of 28-3/4 In.
45°. Cut at 45 degrees. Easy adjustments: blade height or angle, as well as simple fence adjustments to adhere to the cutting material. Bevel: 0° to 45°: for cuts ranging from 3-1/8 In. Stand: stable and durable fold and roll stand for easy set up and breakdown, providing stability while in use. 0° to 2-1/4 In. Blade: 10 in.
1. WEN
#ad
Two Pack, WEN BL1232-2 12-Inch 32-Tooth and 80-Tooth Carbide-Tipped Professional Woodworking Saw Blade Set
#adWEN #ad - Featuring both a 32-tooth blade for general woodcutting and a 80-tooth blade for fine-finish woodworking. Perfect for slicing through both hard and softwoods of all kinds. Ultra-thin 1/10-inch kerf 2.More information #ad
6 mm provides clean and efficient cuts. Blades measure in at 12-inch diameter 305 mm with a 1-inch arbor 25. 4 mm and a rating of up to 6000 RPM. Compatible with the majority of 12-inch miter saws, jobsite saws, and table saws.Brand | WEN #ad |
Manufacturer | WEN #ad |
Part Number | BL1232-2 |
Model | BL1232-2 |
More information #ad
2. Freud
#ad
One Size, Multi, 12" x 20T Thick Stock Rip Blade
#adFreud #ad - 12" x 20t thick stock rip Blade, Multi, One Size. 12" x 20t thick stock rip Blade, Multi, One Size. 12" x 20t thick stock rip Blade, Multi, One Size. 12" x 20t thick stock rip Blade, Multi, One Size. 12" x 20t thick stock rip Blade, Multi, One Size.More information #ad
Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 0.45 Inches |
Length | 12.1 Inches |
Weight | 1 Pounds |
Width | 12 Inches |
Part Number | FEUNLM71M012 |
Model | LM71M012 |
More information #ad
3. Freud
#ad
One Size, Freud 12" x 30T Thin Kerf Rip Blade LU87R012, Multi
#adFreud #ad - 12-inch 30 tooth atb thin Kerf Ripping Saw Blade. 12-inch 30 tooth atb thin Kerf Ripping Saw Blade. 12-inch 30 tooth atb thin Kerf Ripping Saw Blade. 12-inch 30 tooth atb thin Kerf Ripping Saw Blade. 12-inch 30 tooth atb thin Kerf Ripping Saw Blade.More information #ad
Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 0.55 Inches |
Length | 12.05 Inches |
Weight | 1 Pounds |
Width | 11.95 Inches |
Part Number | LU87R012 |
Model | LU87R012 |
More information #ad
4. Freud
#ad
Freud LM72R012 12" Heavy-Duty Rip Blade, One Size, Multi
#adFreud #ad - 12-inch 30 tooth ftg glue Line Ripping Saw Blade. 12-inch 30 tooth ftg glue Line Ripping Saw Blade. 12-inch 30 tooth ftg glue Line Ripping Saw Blade. 12-inch 30 tooth ftg glue Line Ripping Saw Blade. 12-inch 30 tooth ftg glue Line Ripping Saw Blade.More information #ad
Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 0.5 Inches |
Length | 12.15 Inches |
Weight | 1 Pounds |
Width | 12.05 Inches |
Part Number | FRE-LM72R012 |
Model | LM72R012 |
Warranty | Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4602 |
More information #ad
5. Luxite
#ad
Luxite Saw 12 inch 40-Tooth Carbide Tip Rip Saw Blades for Table Saws
#adLuxite #ad - The 12-inch luxite saw series 35 saw blade has a low count of 40 teeth, which provides smooth, high-performance cuts along the grain. Luxite saw 40-tooth rip saw blades are compatible with nearly all major brands of table saws and miter saws that take a 12-inch blade diameter and a 1” arbor.All 12-inch models of luxite saw rip saw blades are created and tested for quality assurance entirely in the United States. The blade makes aggressive yet clean cuts in soft, hard and exotic woods, as well as particle board and other non-laminated composites using additional gullet depth, an extreme 20-degree hook angle and a staggered tooth layout.
More information #ad
The carbide material on the blade’s tips is designed to reduce kerf tearout and chipping, create clean cuts and outlast traditional rip saw blades. For more information and installation guides, visit the York Saw & Knife blog.Brand | Luxite #ad |
Manufacturer | York Saw & Knife #ad |
Part Number | tyyt-583 |
More information #ad
6. Freud
#ad
12-Inch 40 Tooth TCG Glue Line Ripping Saw Blade
#adFreud #ad - 12-inch 40 tooth tcg glue Line Ripping Saw Blade. 12-inch 40 tooth tcg glue Line Ripping Saw Blade. 12-inch 40 tooth tcg glue Line Ripping Saw Blade. 12-inch 40 tooth tcg glue Line Ripping Saw Blade. 12-inch 40 tooth tcg glue Line Ripping Saw Blade.More information #ad
Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 0.45 Inches |
Length | 12.1 Inches |
Weight | 1 Pounds |
Width | 12 Inches |
Part Number | LM74R012 |
Model | LM74R012 |
Warranty | Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4126 |
More information #ad
7. Freud
#ad
Freud Diablo 10"x6 Tooth Polycrystalline Diamond Tipped Cement Saw Blade 5/8"
#adFreud #ad - The pcd triple chip design offers up to 60 times longer cutting life than standard carbide blades. The laser cut thin kerf design gives fast and precise cuts with less dust and waste. The only approved james hardie polycrystalline diamond PCD tipped fiber cement saw blade.More information #ad
Developed by james hardi and Freud Diablo for all James Hardie fiber cement products and other fiber cement brand products. Imported. Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.Brand | Freud #ad |
Manufacturer | Freud #ad |
Height | 1 Inches |
Length | 1 Inches |
Weight | 0.3 Pounds |
Width | 1 Inches |
Part Number | D1006DH |
Model | D1006DH |
Warranty | None. |
More information #ad
8. Forrest
#ad
Forrest WW12407125 Woodworker II 12-Inch 40 Tooth ATB 1/8-Inch Kerf Saw Blade with 1-Inch Arbor
#adForrest #ad - Ends blade changing, ends cutting 1/16 oversize, Ends scratchy, Ends second-step finishing, Buy and Sharpen ONE blade. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.Double hard and 40% stronger c-4 carbide will give up to 300% longer life between sharpening. With this one all purpose blade you can rip and crosscut 1 inch to 2 inch ROCKHARDS and SOFTWOODS resulting in a smooth-as-sanded surface.
More information #ad
Forrest ww12407125 woodworker ii - diameter d = 12-inch, arbor a = 1-Inch, Teeth T = 40, kerf k = 1/8-inch, Tooth Style = ATB. Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result…no planing/jointing or sanding.Brand | Forrest #ad |
Manufacturer | Forrest #ad |
Part Number | WW-12-40-7-125 |
More information #ad
9. DEWALT
#ad
Yellow, 2-Pack DW3128P5D80I , 80-Tooth, DEWALT 12-Inch Miter Saw Blade
#adDEWALT #ad - Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish. Exclusive wedge shoulder design puts more steel behind each tip for increased durability and accuracy.More information #ad
Brand | DEWALT #ad |
Manufacturer | Dewalt #ad |
Height | 0.63 Inches |
Length | 17 Inches |
Weight | 1 Pounds |
Width | 13.63 Inches |
Part Number | DW3128P5D80I |
Model | DW3128P5D80I |
More information #ad
10. Metabo HPT
#ad
Metabo HPT Table Saw | 10-Inch Blade | 35-Inch Rip Capacity | Fold & Roll Stand | 8 x 13/16-Inch Dado Capacity | C10RJS
#adMetabo HPT #ad - Cut at 90 degrees and 2-1/4 In. Includes: table saw, rip fence and miter gauge assemblies, Wrenches, Kickback, 10-inch 40-tooth carbide tipped blade, Blade Guard, Push Stick, Outfeed Support.X 2 in. For easy and stable material support. Table size: 28-3/4 in. Table capacity: 35-in to the right and. Cut capacity: capable of a 3-1/8 in. Working table size: with out feed support of 28-3/4 In.
More information #ad
X 22 in. 40t carbide tipped blade: offers high cutting capacity. Motor: powerful 15 amp motor with 4, 500 RPM for tackling the toughest cutting applications. Technology: Featuring soft star and electric brake. 45°. Cut at 45 degrees. Easy adjustments: blade height or angle, as well as simple fence adjustments to adhere to the cutting material. Bevel: 0° to 45°: for cuts ranging from 3-1/8 In. Stand: stable and durable fold and roll stand for easy set up and breakdown, providing stability while in use. 0° to 2-1/4 In. Blade: 10 in.
Brand | Metabo HPT #ad |
Manufacturer | Koki Holdings America, Ltd #ad |
Height | 36 Inches |
Length | 28.75 Inches |
Weight | 96 Pounds |
Width | 22 Inches |
Part Number | C10RJSM |
Model | C10RJS |
Warranty | 2 Year |
More information #ad