As an Amazon Associate I earn from qualifying purchases.




Louvered adjustable register grille for sidewall or ceiling Application, Quiet and Smooth Control Lever, Easy Opening and Closing Back Dampers For Better Airflow Control, Noise Free Components.1
75"h - see below in description how to measure a grillE. Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Each individual fin is adjustable for max airflow control – adjust the fins to open or close from the Front - Easy Unrestricted Air Flow Deflection For Your HVAC System.





Unrestricted airflow for your hvac system - adjustable louvers - full Control Horizontal Airflow Direction - Noise Free Components - No Vibrating Louvers Etc. Looks like It Was Just Waxed. Rigid aluminum construction - never rust - powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
1. Accord Ventilation
#ad
White, Accord ABSWWH41010 Sidewall/Ceiling Register with 4-Way Design, 10-Inch x 10-InchDuct Opening Measurements
#adAccord Ventilation #ad - 1/2-in spaced fins. Steel construction for sidewall or ceiling application. The number of louvered columns and mounting holes will vary based on the size of the grille ordered.More information #ad
Listed product sizes refer to the duct opening measurements, not the register itself. Four-way air deflection with a multi-shutter damper.Brand | Accord Ventilation #ad |
Manufacturer | Accord #ad |
Height | 1.37 Inches |
Length | 11.5 Inches |
Width | 11.5 Inches |
Part Number | ABSWWH41010 |
Model | ABSWWH41010 |
More information #ad
2. HVAC Premium
#ad
DUCT COVER & DIFFUSER, 13" Height, 10 x 10 in HVAC Vent Cover, LOW NOISE, With Opposing Damper Blades Outer Dimensions: 13" Width, 3 WAY SUPPLY GRILLE, For Ceiling
#adHVAC Premium #ad - Ceiling Grille. No sharp Surface Edges. Carefully shrink wrapped with cardboard backing to prevent damage in shipment. Easy unrestricted air Flow For Youre HVAC System. Smooth surface edges - run your Fingers Across The Surface To Feel The Smoothness.More information #ad
Brand | HVAC Premium #ad |
Manufacturer | HVAC Premium #ad |
Weight | 2.5 Pounds |
Part Number | MFEASC10W3 |
Model | CECOMINOD088190 |
Warranty | Manufacturer |
More information #ad
3. Decor Grates
#ad
Natural Oak, 6x10, Decor Grates WL610W-N Wall/Ceiling Register
#adDecor Grates #ad - Included are brass screws for easy installation and a consistent look. Wood grain pattern and shade may vary. Metal damper boxes rust and seize up, so we make our damper boxes with high impact plastic.More information #ad
This is not a cheaper option, it’s the best option. Oak wood louvered Natural finish wall/ceiling register. Available in a variety of styles and finishes to match any decor.Brand | Decor Grates #ad |
Manufacturer | Decor Grates #ad |
Height | 7.5 Inches |
Length | 11.5 Inches |
Weight | 0.85 Pounds |
Width | 1.75 Inches |
Part Number | WL610W-N |
Model | WL610W-N |
Warranty | Limited 12 month Warranty |
More information #ad
4. HBW
#ad
HBW Two-Way Plastic Side Wall/Ceiling Register in White 10" w X 8" h for Duct Opening Outside Dimension is 11.75" w X 10" h
#adHBW #ad - Multi-shutter damper with easy handle to adjust desired amount of air flow. Two way air deflection design with bright white face and black damper in the back. All plastic construction with 1/2" fin spacing for high air flow with rust proof feature perfect for areas with high moisture.More information #ad
The listed size 10"x 8" is for inside duct opening measurement, actual outside dimension is 11. 75" x 10". Two screw holes on each side with two screws included.Brand | HBW #ad |
Manufacturer | HBW #ad |
Height | 1.5 Inches |
Length | 11.75 Inches |
Width | 9.75 Inches |
More information #ad
5. HVAC Premium
#ad
HVAC Vent Cover Sidewall or Ceiling, 10"w X 10"h Adjustable AIR Supply Diffuser, Grille Register, White Outer Dimensions: 11.75"w X 11.75"h, High Airflow
#adHVAC Premium #ad - High quality steel construction, shiny, no sharp edges, screws same color as vent Cover, Scratch-Resistant, 2 Recessed Screw Holes On Each Side with Screws Included, no scuff powder coat durable finish, Smooth, EASY INSTALLATION.Louvered adjustable register grille for sidewall or ceiling Application, Quiet and Smooth Control Lever, Easy Opening and Closing Back Dampers For Better Airflow Control, Noise Free Components.1
More information #ad
10"w x 10"h is the size for the duct opening measurement only actual front end frame outer dimensions are 11. 75"w x 11. 75"h - see below in description how to measure a grillE. Quality packaging - carefully shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. Each individual fin is adjustable for max airflow control – adjust the fins to open or close from the Front - Easy Unrestricted Air Flow Deflection For Your HVAC System.
Brand | HVAC Premium #ad |
Manufacturer | HVAC Premium #ad |
Height | 10 Inches |
Length | 1 Inches |
Width | 10 Inches |
Part Number | SV1010 FBA |
Model | CECOMINOD079691 |
More information #ad
6. Accord Ventilation
#ad
Accord ABSWWH2106 Sidewall/Ceiling Register with 2-Way Design, White, 10-Inch x 6-InchDuct Opening Measurements
#adAccord Ventilation #ad - 1/2-in spaced fins. Two-way air deflection with a multi-shutter damper. Steel construction for sidewall or ceiling application.More information #ad
The number of louvered columns and mounting holes will vary based on the size of the grille ordered. Listed product sizes refer to the duct opening measurements, not the register itself.Brand | Accord Ventilation #ad |
Manufacturer | Accord #ad |
Height | 1.38 Inches |
Length | 11.5 Inches |
Weight | 1.1 Pounds |
Width | 7.6 Inches |
Part Number | ABSWWH2106 |
Model | ABSWWH2106 |
More information #ad
7. EZ-FLO
#ad
White Two-Way Sidewall/Ceiling Register, EZ-FLO 61609, 10 inch W x 4 inch H Opening, 10" x 4"
#adEZ-FLO #ad - Constructed of heavy-duty steel that provides strength and durability. The register features a powder-coated white finish that resists flaking, scratching and fading. Designed for use in both sidewall and ceiling locations.More information #ad
The two-way sidewall/ceiling register measures 11-3/4 inch x 5-3/4 inch with a duct opening of 10 inch x 4 inch. The steel register has a two-way air deflection to allow a better flow of air.Brand | EZ-FLO #ad |
Manufacturer | EZ-FLO #ad |
Height | 1 Inches |
Length | 11.75 Inches |
Weight | 1 Pounds |
Width | 5.75 Inches |
Part Number | 61609 |
Model | 61609 |
Warranty | 1 year limited lifetime |
More information #ad
8. Accord Ventilation
#ad
Accord ABSWWH3106 Sidewall/Ceiling Register with 3-Way Design, 10-Inch x 6-InchDuct Opening Measurements, White
#adAccord Ventilation #ad - 1/2-in spaced fins. Listed product sizes refer to the duct opening measurements, not the register itself. The number of louvered columns and mounting holes will vary based on the size of the grille ordered.More information #ad
Steel construction for sidewall or ceiling application. Three-way air deflection with multi-shutter damper.Brand | Accord Ventilation #ad |
Manufacturer | Accord #ad |
Height | 1.41 Inches |
Length | 11.5 Inches |
Weight | 0.8 Pounds |
Width | 7.56 Inches |
Part Number | ABSWWH3106 |
Model | ABSWWH3106 |
More information #ad
9. JR Products
#ad
White, JR Products 02-28905 Dampered Floor Register, 2" x 10"
#adJR Products #ad - Easy, one hand damper operation. Long lasting, powder coated color. Constructed of durable steel. Oem replacement size. Screw hole for secure installation.More information #ad
Brand | JR Products #ad |
Manufacturer | JR Products #ad |
Height | 1.6 Inches |
Length | 13.4 Inches |
Weight | 0.86 Pounds |
Width | 4.3 Inches |
Part Number | 02-28905 |
Model | 02-28905 |
More information #ad
10. HVAC Premium
#ad
Vent Duct Cover, 10"w X 10"h Aluminum Double Deflection Adjustable Air Supply HVAC Diffuser, Wide Front End Overlap, Full Control Vertical/Horizontal Airflow Direction
#adHVAC Premium #ad - High quality - rigid aluminum construction with recessed screw holes screws included To Easily Install On Ceiling Or Sidewall - Beautiful Perforated Design To Add A Touch Of Upper Class To Your Room And HVAC system.Unrestricted airflow for your hvac system - adjustable louvers - full Control Horizontal Airflow Direction - Noise Free Components - No Vibrating Louvers Etc. Looks like It Was Just Waxed. Rigid aluminum construction - never rust - powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
More information #ad
Quality packaging - carefully shrink wrapped With Solid Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality. 10"w x 10"h is the size for the duct opening measurement only, actual front end outer dimensions are 11. 6" width X 11. 6" height - see below in description how to measure a gRILLE.Brand | HVAC Premium #ad |
Manufacturer | HVAC Premium #ad |
Part Number | DDAG-A-1010 |
Warranty | Manufacturer |
More information #ad