RPM Rear A-arms for the Electric 2WD Stampede, Rustler, and Monster Jam, Green

#ad
#ad
HRP Distribution RPM80184 #ad - Rpm a-arms for the electric versions of the traxxas Rustler & Stampede 2wd are molded in either blue or black and are sold in pairs – 1 left rear and 1 right rear per package. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they fir on the Stampede 4x4. Replaces weaker stock components.

While we were at it, we eliminated over 0030" or 1/32" of slop from the inner arm mount and more than 0010" or slightly less than 1/64" of slop at the outer hinge pin for an ultra-smooth, slop-free suspension system. Designed to increase durability. Rpm rear a-arms for the electric versions of the traxxas rustler & stampede 2wd are stronger and more durable than stock versions, but we've also managed to eliminate over 7 grams of weight per arm! That's 14 grams of unsprung weight eliminated with a single pair of rear A-arms! Coupled with a set of RPM front A-arms, the total weight loss exceeds 24 grams or almost a full ounce! We accomplished this without creating any weak points nor are our A-arms any more flexible than the stock versions.

RPM Rear A-arms for the Electric 2WD Stampede, Rustler, and Monster Jam, Green #ad - Additionally, we've adjusted the shock mount locations slightly to allow more noticeable tuning adjustments when using the inner or outer shock mount holes while the center hole remains in its stock location. Proudly made in the USA.

More information about HRP Distribution RPM80184 #ad

RPM Front A-Arm 2WD Slash, Rustler, Stampede, Nitro Slash, Green

#ad
#ad
HRP Distribution RPM80244 #ad - Additionally, we've increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers. Rpm front a-arms are nearly 25% lighter than stock versions of the same A-arms, yet the RPM versions are backed with our world-renowned breakage warranty.

Proudly made in the USA. These a-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm's ability to ride up and over tall obstacles instead of slamming into them. Rpm front a-arms for the traxxas slash 2wd, Nitro Slash, e-Rustler & e-Stampede are built to withstand some of the toughest abuse.

RPM Front A-Arm 2WD Slash, Rustler, Stampede, Nitro Slash, Green #ad - Rpm front a-arms for the traxxas slash, e-Rustler & e-Stampede are sold in pairs and are available in either black or blue. Rpm a-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain. Designed to increase durability. Incredibly, we were able to shave some unwanted unsprung weight as well.

These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4. Replaces weaker stock components.

More information about HRP Distribution RPM80244 #ad


Similar products



RPM Wide Front Bumper Black Rustler, Stampede, Bandit, Green

#ad
#ad
HRP Distribution RPM81164 #ad - These bumpers will help reduce front end damage during head on collisions with curbs, trees, etc. Nothing surpasses the protection gained when your Traxxas vehicle is protected with an RPM wide front bumper! Designed to increase durability. Replaces weaker stock components. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4.

Replaces weaker stock components. Rpm designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black to give it that stock-looking appearance, or in optional blue or green to match the line of Grave Digger and Son-Uva-Digger chassis and body paint schemes.

RPM Wide Front Bumper Black Rustler, Stampede, Bandit, Green #ad - This bumper stands six inch wide and adds an extra 1-1/2" worth of bulletproof, protection to the front end of the vehicle. Proudly made in the USA. Designed to increase durability. Give that traxxas nitro or electric Rustler, Stampede, Nitro Sport or Bandit added protection with the RPM wide front bumper. Proudly made in the USA.

More information about HRP Distribution RPM81164 #ad


Similar products



RPM Traxxas Sealed Gear Cover, Green

#ad
#ad
HRP Distribution RPM80524 #ad - An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Replaces weaker stock components. The most recent electric versions of the e-rustler, e-Stampede, Bandit and Slash 2wd have several new features that caused interference issues with our original RPM molded gear cover for the Stampede & Rustler.

These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4. Completely sealed, stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter. More clearance for larger pinions for owners hungry for speed.

RPM Traxxas Sealed Gear Cover, Green #ad - Retains all stock geometry for easy bolt up; no cutting or gluing required. Rpm gear covers for the electric versions of the Traxxas Stampede, Rustler, Bandit and Slash are sold in black or blue and carry our limited lifetime warranty against failure due to materials or workmanship issues. Sleek contours that would look great on any vehicle.

We narrowed two areas along the perimeter of the gear cover to allow clearance for the rear bumper/wheelie bar mount as well. Replaces weaker stock components. Proudly made in the USA.

More information about HRP Distribution RPM80524 #ad


Similar products



Traxxas 3678A Wheelie Bar, Green

#ad
#ad
Traxxas TRA3678A #ad - Existing wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires part #5186 or the separate rubber tires part #5185 are also compatible for custom looks and increased performance. It quickly and easily installs onto the rear of any electric Slash, Stampede, Rustler, and Bandit and provides extra protection for the motor and transmission case.

Designed to increase durability. Traxxas has engineered a bolt-on wheelie bar mount for Slash, Rustler, Stampede, and Bandit that uses the unique patent-pending Traxxas adjustable wheelie bar. Completely sealed, stock gear covers have a large, open gap between the spur gear and the out-drive that allows gear destroying dirt to enter.

Traxxas 3678A Wheelie Bar, Green #ad - The wheelie bar features four positions to adjust wheel height. More clearance for larger pinions for owners hungry for speed. Proudly made in the USA. Sleek contours that would look great on any vehicle. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4.

Retains all stock geometry for easy bolt up; no cutting or gluing required. Designed to increase durability.

More information about Traxxas TRA3678A #ad


Similar products



RPM Heavy Duty Camber Links, Green

#ad
#ad
HRP Distribution RPM81264 #ad - We continually accomplish this objective by using our 50+ years of mold making and injection molding experience combined with our trademark blend of bulletproof plastics to create the most durable, longest lasting and best performing parts available! Our goal is to provide our customers with outstanding parts and tools that will not only improve performance and look great, but will eliminate the unnecessary headaches that come with broken parts.

Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Proudly made in the USA. Assembled green wheelie bar features four adjustment positions to lower the height of the wheels.

RPM Heavy Duty Camber Links, Green #ad - Retains all stock geometry for easy bolt up; no cutting or gluing required. Proudly made in the USA. Designed to increase durability. Designed to increase durability. Replaces weaker stock components. Proudly made in the USA. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4.

Ask any rpm customer about their satisfaction level with RPM products and you will hear many positive remarks.

More information about HRP Distribution RPM81264 #ad


Similar products



Traxxas 3757A Green Rear Springs pair

#ad
#ad
Traxxas TRA3757A #ad - These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4. Replaces weaker stock components. Proudly made in the USA. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. No one has done more than traxxas to advance the RTR category with innovative thinking and fun designs that make it easy for anyone to get started in the great R/C hobby.

Quickly and easily installs onto Traxxas electric Slash 2WD, Stampede, Rustler, Bandit, and Stampede-based vehicles. Durable composite nylon construction offers an extra level of protection for the motor and transmission case. An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area.

Traxxas 3757A Green Rear Springs pair #ad - Designed to increase durability. Replaces weaker stock components. Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires. Replaces weaker stock components. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Designed to increase durability.

Sleek contours that would look great on any vehicle.

More information about Traxxas TRA3757A #ad


Similar products



RPM Caster Blocks Electric 2WD Slash, Stampede, Rustler, Nitro Slash, Black

#ad
#ad
HRP Distribution RPM80712 #ad - Proudly made in the USA. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4. Proudly made in the USA. Designed to increase durability. Proudly made in the USA. Sleek contours that would look great on any vehicle. Rpm caster blocks are redesigned to slim down unnecessary bulk while improving strength and durability in this heavily impacted area.

Replaces weaker stock components. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Proudly made in the USA. Rpm caster blocks are molded in our trademark blend of ultra durable and super strong nylons and backed by the best breakage warranty in the R/C industry.

RPM Caster Blocks Electric 2WD Slash, Stampede, Rustler, Nitro Slash, Black #ad - This product is made from high quality materials and designed for lasting performance. No additional parts or modifications are necessary to mount a set to a vehicle. Designed to increase durability. Assembled green wheelie bar features four adjustment positions to lower the height of the wheels. Retains all stock geometry for easy bolt up; no cutting or gluing required.

Quickly and easily installs onto Traxxas electric Slash 2WD, Bandit, Stampede, Rustler, and Stampede-based vehicles. Durable composite nylon construction offers an extra level of protection for the motor and transmission case.

More information about HRP Distribution RPM80712 #ad


Similar products



Traxxas 3767G Green-Anodized Aluminum Shock Caps, Fits All Ultra Shocks set of 4

#ad
#ad
Traxxas TRA3767G #ad - This is the 3767g Shock Caps Green from Traxxas. Proudly made in the USA. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Made using only the highest quality components. The number one selling name ins RTR. Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires.

Replaces weaker stock components. Designed to increase durability. Rpm #80712 caster blocks replace Traxxas stock #3632 Caster Blocks. Proudly made in the USA. Designed to increase durability. More clearance for larger pinions for owners hungry for speed. Sleek contours that would look great on any vehicle. Proudly made in the USA.

Traxxas 3767G Green-Anodized Aluminum Shock Caps, Fits All Ultra Shocks set of 4 #ad - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Designed to increase durability. Quickly and easily installs onto Traxxas electric Slash 2WD, Bandit, Rustler, Stampede, and Stampede-based vehicles. Durable composite nylon construction offers an extra level of protection for the motor and transmission case.

This is for use on traxxas Ultra Shocks; consult your user's manual for exact parts listings.

More information about Traxxas TRA3767G #ad


Similar products



Traxxas 3640 Steel Suspension Screw Pin Set Rustler, Stampede, Bandit

#ad
#ad
Traxxas TRA3640 #ad - Replaces weaker stock components. Fits rustler, Stampede, Bandit. This product is made from high quality materials and designed for lasting performance. Proudly made in the USA. Made using only the highest quality components. Replaces weaker stock components. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles.

. Designed to increase durability. Rpm #80712 caster blocks replace Traxxas stock #3632 Caster Blocks. This is for use on traxxas Ultra Shocks; consult your user's manual for exact parts listings. This is the 3640 suspension Screw Pin Set Steel 10 from Traxxas. Innovative design and engineering. These a-arms will not work on the nitro versions of the Rustler & Stampede nor will they work on the Stampede 4x4.

Traxxas 3640 Steel Suspension Screw Pin Set Rustler, Stampede, Bandit #ad - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Replaces weaker stock components. This is for use on rc vehicles such as the Traxxas Rustler; consult your user's manual for exact parts listings. Retains all stock geometry for easy bolt up; no cutting or gluing required.

Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.

More information about Traxxas TRA3640 #ad


Similar products



Traxxas 3632G Green-Anodized 6061-T6 Aluminum Caster Blocks pair

#ad
#ad
Traxxas TRA3632G #ad - Proudly made in the USA. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Proudly made in the USA. Steel hex drive. In addition to the strength and precision of the machined billet 6061-T6 aluminum, the red, blue, green or pink anodized caster blocks feature a high-contrast laser etched TRX logo.

Made using only the highest quality components. Innovative design and engineering. An oversized access hole and soft plug for easy access to the slipper clutch nut while still maintaining an unmatched seal of the gear mesh area. Accepts wheelie bar accessories such as the aluminum wheelie bar wheels with rubber tires.

Traxxas 3632G Green-Anodized 6061-T6 Aluminum Caster Blocks pair #ad - Includes suspension screw pin 2. This product is made from high quality materials and designed for lasting performance. Retains all stock geometry for easy bolt up; no cutting or gluing required. Fits rustler, Stampede, Bandit. Sleek contours that would look great on any vehicle. This product is made from high quality materials and designed for lasting performance.

Proudly made in the USA.

More information about Traxxas TRA3632G #ad


Similar products