OREGON72LGX072G 72 Drive Link Super Guard Chain, 3/8-Inch

#ad
#ad
Oregon 72LGX072G #ad - Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. Oregon 72lgx, 73lgx, and 75lgx 3/8"-pitch super guard chains feature cutters that have an advanced grind geometry that is "work ready". Blued cutters provide superior corrosion resistance and improved strength. Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.

OREGON72LGX072G 72 Drive Link Super Guard Chain, 3/8-Inch #ad - This chain has a Standard sequence configuration. X" grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias undercut modes. This series saw chain is for professionals who demand saw chain that delivers high performance, resists stretch, simple to maintain, provides long life, and is consistent from loop to loop.

Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.

More information about Oregon 72LGX072G #ad

Oregon 200RNDK095 .050" Gauge 3/8" Pitch 20" Power Match Bar

#ad
#ad
Oregon 200RNDK095 #ad - Power match bars are recommended for 3. 5 cu. For commercial and consumer use and fits the following models only with 3/8" pitch fits cub cadet: cs5720, 535, fairmont hydraulic: hcs816, 357xp, 490, 261, 119, dcs 520i, 359, 113, 2055, 120si, 116si, husqvarna: 257, dolmar: 110, 2063, 2051, 362, hcs820, ps-6000i, ps-540, 116, 262, jonsered: 2050, 460, 115, 262XP, 118, 117, 362XP, 55 Rancher, 520sp, makita: dcs 5200i, 114, 111, 120 super, 455, dcs 540, ps-6800i, 112, hcs824, 357, 590, 525, DCS 6000i.

Replaceable sprocket-nose. The long nose takes most of the abuse to minimize wear to the body of the bar. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. In 58 cc and larger saws. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Super-tough chrome-moly steel provides superior bar-body strength and tough rails with excellent resistance to wear and chipping.

Oregon 200RNDK095 .050" Gauge 3/8" Pitch 20" Power Match Bar #ad - Oregon power match Bars are the industry standard for professional users cutting clean wood. The power match bars nose fastens with a single rivet and are securely held by wide, strong, overlapping ears.

More information about Oregon 200RNDK095 #ad


Similar products



Oregon 200RNDD009 .050" Gauge 3/8" Pitch 20" Power Match Bar

#ad
#ad
Oregon 200RNDD009 #ad - 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. The long nose takes most of the abuse to minimize wear to the body of the bar. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Power match bars are recommended for 3. 5 cu. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters.

For commercial and consumer use and fits the following models only with 3/8" pitch fits cub cadet: cs5720, 113, 117, 357xp, dcs 540, 115, 520sp, 116, 116si, 119, husqvarna: 257, 118, 525, dolmar: 110, 2055, 262, 362xp, 490, 460, makita: dcs 5200i, dcs 520i, 261, 359, 455, 120si, 120 super, 114, ps-6800i, jonsered: 2050, 362, 111, fairmont hydraulic: hcs816, 357, 112, 55 Rancher, 2063, 590, ps-540, 262XP, 535, 2051, ps-6000i, hcs824, hcs820, DCS 6000i.

Oregon 200RNDD009 .050" Gauge 3/8" Pitch 20" Power Match Bar #ad - Replaceable sprocket-nose. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. Bar mount used on delmar, Conserved, Partner, Shindaiwa, Husqvarna, makita, Solo saws. Replaceable sprocket-nose. The power match bars nose fastens with a single rivet and are securely held by wide, strong, overlapping ears.

Oregon power match Bars are the industry standard for professional users cutting clean wood.

More information about Oregon 200RNDD009 #ad


Similar products



OREGON 72LGX084G 84 Drive Link Super Guard Chain, 3/8-Inch

#ad
#ad
Oregon 72LGX084G #ad - Bar mount used on delmar, Conserved, Partner, Husqvarna, Shindaiwa, makita, Solo saws. Replaceable sprocket-nose. Blued cutters provide superior corrosion resistance and improved strength. Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions.

. Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders.

OREGON 72LGX084G 84 Drive Link Super Guard Chain, 3/8-Inch #ad - X" grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias undercut modes. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. For commercial and consumer use and fits the following models only with 3/8" pitch fits cub cadet: cs5720, 455, dcs 520i, 359, 112, 111, 114, ps-6800i, 535, 119, husqvarna: 257, 357, 113, makita: dcs 5200i, hcs820, 262, fairmont hydraulic: hcs816, hcs824, 460, 357xp, 362, ps-6000i, 2055, 362XP, 120si, 520sp, 118, 590, ps-540, 116, 120 super, dcs 540, 115, 2051, 2063, 261, jonsered: 2050, 262XP, 117, 525, 55 Rancher, dolmar: 110, 490, 116si, DCS 6000i.

Replaceable sprocket-nose. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Oregon 72lgx, 73lgx, and 75lgx 3/8"-pitch super guard chains feature cutters that have an advanced grind geometry that is "work ready".

More information about Oregon 72LGX084G #ad


Similar products



Oregon 200RNDD025 .050" Gauge 3/8" Pitch 20" Power Match Bar

#ad
#ad
Oregon 200RNDD025 #ad - Replaceable sprocket-nose. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. X" grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias undercut modes. In 58 cc and larger saws.

This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders. The power match bars nose fastens with a single rivet and are securely held by wide, strong, overlapping ears.

Oregon 200RNDD025 .050" Gauge 3/8" Pitch 20" Power Match Bar #ad - Blued cutters provide superior corrosion resistance and improved strength. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. Bar mount used on delmar, makita, Partner, Shindaiwa, Conserved, Husqvarna, Solo saws. Replaceable sprocket-nose. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters.

Power match bars are recommended for 3. 5 cu.

More information about Oregon 200RNDD025 #ad


Similar products



Oregon 68210 7-Tooth Standard 7 Spline Power Mate Rim Pitch, 3/8"

#ad
#ad
Oregon 68210 #ad - Replaceable sprocket-nose. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Bar mount used on delmar, makita, Husqvarna, Conserved, Partner, Shindaiwa, Solo saws. Replaceable sprocket-nose. For commercial and consumer use and fits the following models only with 3/8" pitch fits cub cadet: cs5720, 362, fairmont hydraulic: hcs816, hcs820, 261, 362xp, makita: dcs 5200i, 118, 2055, 114, 111, 120 super, 262xp, ps-6000i, 460, 262, ps-6800i, dcs 540, 55 rancher, 490, 520sp, 120si, 117, 119, jonsered: 2050, 535, 116si, 116, 455, 357XP, 113, 590, 525, hcs824, 115, ps-540, dolmar: 110, 2063, Husqvarna: 257, 357, 359, DCS 520i, 112, 2051, DCS 6000i.

Replaceable sprocket-nose. Blued cutters provide superior corrosion resistance and improved strength. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. The rim "floats" on the spline and allows the saw chain and rim to align with the groove of the guide bar extending the operational life of the Sprocket.

Oregon 68210 7-Tooth Standard 7 Spline Power Mate Rim Pitch, 3/8" #ad - Replace rim every two chain loops. Oregon 68210 power mate replacement rim used on oregon 12667x, 28094x, 28187x, 18200x, 23706x, 29313x, 22209, 25842x, 27189x, 13916x, 16208, 26831, 30666X Power Mate Rim Sprocket Systems. Also used with oregon 30672x, 11203x, 36868x, 38470x, 111450x, 108565x, 111590x, 68209x, 102469, 35464x, 30685x, 100757, 105772x, 106593x, 509604X Power Mate Rim Sprocket Systems.

For 3/8" pitch chain saws with 7-Tooth Rim Standard 7 Spline Sd7 Sprocket System.

More information about Oregon 68210 #ad


Similar products



"Oregon 12 Pack Chainsaw File Pack 7/32"" # 70502 Works On All Chainsaw Models With 3/8 And .404 Pitch Chains"

#ad
#ad
Oregon 70502 #ad - Replaceable sprocket-nose. For use on cub cadet, sears, makita, home lite, husqvarna, dolmar, Conserved, olympic, Skill, Remington, McCulloch, echo, John Deere, master craft, Poulan, Stihl. Replace rim every two chain loops. The oregon 70502 7/32"x8" round files remove more material than competitive brands and are still aggressive when other brands reach their end of life.

Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. This package contains twelve round files. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters.

"Oregon 12 Pack Chainsaw File Pack 7/32"" # 70502 Works On All Chainsaw Models With 3/8 And .404 Pitch Chains" #ad - This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Compatible with the following oregon chain types: 27a, 72ap, 68jx/lx, 72-73-75v, 72-73-75DP, 72-73-75JGX/JPX/LPX and 58-59L/J. Tang length is uniform, no burrs nor sharp edges. Please check manual for compatibility.

Swiss double-cut file design with precision cutting-tooth and fewer teeth per inch than competitive files. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count.

More information about Oregon 70502 #ad


Similar products



Oregon 106032 20-Inch Pro-Lite Bar and 72LGX .050-Inch Chain Gauge, Saw Combo

#ad
#ad
Oregon 106032 #ad - Bar and chain combo is designed for professional and commercial use on Stihl brand chainsaws. Blued cutters provide superior corrosion resistance and improved strength. Replaceable sprocket-nose. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Precision center less grind, Uniform file diameter and tooth height.

Replace rim every two chain loops. X" grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias undercut modes. Drive links - 72. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Please check manual for compatibility.

Oregon 106032 20-Inch Pro-Lite Bar and 72LGX .050-Inch Chain Gauge, Saw Combo #ad - Swiss double-cut file design with precision cutting-tooth and fewer teeth per inch than competitive files. 200 slh d025 and one 72LGX. 050-inch Chain. Oregon 68210 power mate replacement rim used on oregon 12667x, 18200x, 26831, 16208, 25842x, 29313x, 22209, 13916x, 27189x, 23706x, 28094x, 28187x, 30666X Power Mate Rim Sprocket Systems.

Also used with oregon 30672x, 11203x, 111450x, 30685x, 111590x, 106593x, 38470x, 68209x, 105772x, 108565x, 100757, 102469, 35464x, 36868x, 509604X Power Mate Rim Sprocket Systems. For 3/8" pitch chain saws with 7-Tooth Rim Standard 7 Spline Sd7 Sprocket System.

More information about Oregon 106032 #ad


Similar products



Oregon 7/32-Inch Chain Saw File - 2 Pack 40458

#ad
#ad
Oregon 40458 #ad - 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions. Bar length - 20-inch. File diameter - 7/32-inch. Drive links - 72. Compatible with the following oregon chain types: 27a, 72ap, 68jx/lx, 72-73-75DP, 72-73-75v, 72-73-75JGX/JPX/LPX and 58-59L/J.

Tang length is uniform, no burrs nor sharp edges. Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. For commercial and consumer use and fits the following models only with 3/8" pitch fits cub cadet: cs5720, 55 rancher, 359, 114, ps-540, dolmar: 110, hcs824, husqvarna: 257, 490, 535, 262xp, 120 super, 2063, dcs 540, 261, 113, 115, makita: dcs 5200i, 118, 116, fairmont hydraulic: hcs816, 525, 262, ps-6000i, jonsered: 2050, 362, 119, DCS 520i, 111, 590, 520sp, 357, 116si, 455, 2051, 117, ps-6800i, 362XP, 2055, 112, 460, 357XP, hcs820, 120si, DCS 6000i.

Oregon 7/32-Inch Chain Saw File - 2 Pack 40458 #ad - Replaceable sprocket-nose. Pitch - 3/8-inch. Replaceable sprocket-nose. Replace rim every two chain loops. For use on cub cadet, conserved, john deere, remington, Makita, Sears, home lite, Poulan, dolmar, olympic, Skill, McCulloch, master craft, echo, Husqvarna, Stihl. Bar mount used on delmar, Partner, Shindaiwa, makita, Husqvarna, Conserved, Solo saws.

More information about Oregon 40458 #ad


Similar products



Oregon 20-Inch Chain Saw Bar Protective Cover 28933

#ad
#ad
Oregon 28933 #ad - Replaceable sprocket-nose. Recommended saw size: 50 to 100cc, bar length: 16 to 36-inch 41-91cm. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. File diameter - 7/32-inch. Gauge -. 050-inch. This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters.

This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Finest steel material. Precision center less grind, Uniform file diameter and tooth height. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count. Please check manual for compatibility. Swiss double-cut file design with precision cutting-tooth and fewer teeth per inch than competitive files.

Oregon 20-Inch Chain Saw Bar Protective Cover 28933 #ad - 20-inch length. Protects your bar and chain from damage. Smooth filing action. State-of-the-art manufacturing processes; uniform, optimum hardening, high-quality finishing including sandblasting and demagnetizing. Oregon 68210 power mate replacement rim used on oregon 12667x, 27189x, 28094x, 22209, 25842x, 28187x, 16208, 13916x, 23706x, 18200X, 29313X, 26831, 30666X Power Mate Rim Sprocket Systems.

More information about Oregon 28933 #ad


Similar products



OREGON 20LPX072G 72 Drive Link Super 20 Chain, 0.325-Inch

#ad
#ad
Oregon 20LPX072G #ad - Warning: oregon 72, 73, and 75lgx super guard chains may be capable of kickback that could result in serious injury to the saw operator or bystanders. Precision center less grind, Uniform file diameter and tooth height. Replace rim every two chain loops. Please check manual for compatibility. Swiss double-cut file design with precision cutting-tooth and fewer teeth per inch than competitive files.

X" grind-enhanced grind geometry significantly improves out-of-box sharpness with substantial speed improvement in boring and bias undercut modes. Made of durable plastic material. Patented chain steel-oregon ocs-01 steel is patented and provides greater durability, especially in cold cutting conditions. Resists clogging.

OREGON 20LPX072G 72 Drive Link Super 20 Chain, 0.325-Inch #ad - This professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters. Oregon20lpx, 21lpx, 22lpx super 20 chain is a high-performance chain for professional woodcutters who use. 325"-pitch saws. Bar mount used on Still saws. 20" bar length -. 050" gauge - 3/8" pitch - 11 Tooth Count.

Oregon files remove more material than competitive brands and are still aggressive when other brands reach their end of life.

More information about Oregon 20LPX072G #ad


Similar products