Mitutoyo 264-012-10 USB Input Tool


Mitutoyo 264-012-10 - H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. Works with mitutoyo Digimatic measuring instruments such as micrometers or calipers sold separately.

The tool is for use with digimatic devices such as micrometers, calipers, or gauges, and connects to a computer through a USB interface. The mitutoyo 264-012-10 usb input tool provides an interface to input measurement data from a Mitutoyo measuring device with the Digimatic output feature to a computer.

Mitutoyo 264-012-10 USB Input Tool - The unit dimensions are 2. 8 x 1. 7 x 9 inches 72 x 44 x 23. 5 mm h x w x d, and it weighs 2. 6 ounces 74 grams. Interface to input measurement data from a Mitutoyo Digimatic measuring instrument to a computer. Requires an spc connection cable to connect to a measuring instrument sold separately. The company was founded in tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

An attached usb cable provides output to the computer through a USB 2.

More information about Mitutoyo 264-012-10

Mitutoyo 959149, Digimatic SPC Connecting Cable, 40", With Data Out Switch


Mitutoyo 959149 - Calipers are commonly used in architecture, mechanical engineering, metalworking, and machining. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, multiplexer, display unit, or similar device.

Data out switch type. They make inside, or step measurements, depth, outside, according to their type. Vernier, having a calibrated scale with a fixed jaw, and digital calipers give direct and accurate readings and are functionally identical, dial, and another jaw with a movable pointer that slides along the scale.

As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The cable has a data out switch type and is compatible with digimatic instruments with an output feature, 570-2XX series height gauges, 571-2XX series depth gauges, including all Digimatic calipers with an Absolute encoder, and 572-XXX series scale units.

Mitutoyo 959149, Digimatic SPC Connecting Cable, 40", With Data Out Switch - More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. The cable is 40" long. Compatible mitutoyo devicescalipersall digimatic calipers with an Absolute encoderHeight gauges570-2XX seriesDepth gauges571-2XX seriesScale units572-XXX seriesCalipers measure the distance between two opposing sides of an object.

The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision.

More information about Mitutoyo 959149


Similar products



Mitutoyo 937179T, Footswitch for Mini Processors


Mitutoyo 937179T - Ideal for hands free data input. Mitutoyo footswitch for Mini-Processors and input tools. Use to trigger Mitutoyo multiplexers. Sturdy stamped steel foot switch. Compatible with mitutoyo digimatic instruments with an output feature, including all Digimatic calipers with an Absolute encoder, 570-2XX series height gauges, 571-2XX series depth gauges, and 572-XXX series scale units.

40" length. Easier to use than a hand tool finger switch. Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, multiplexer, display unit, or similar device. Data out switch type. Use for mitutoyo mini-processors and input tools.

More information about Mitutoyo 937179T


Similar products



Mitutoyo 905409, Digimatic Cable, 80", Straight Type


Mitutoyo 905409 - Easier to use than a hand tool finger switch. Use to trigger Mitutoyo multiplexers. See specifications for usage. Sturdy stamped steel foot switch. Compatible with mitutoyo digimatic instruments with an output feature, including all Digimatic calipers with an Absolute encoder, 570-2XX series height gauges, 571-2XX series depth gauges, and 572-XXX series scale units.

40" length. Mitutoyo digimatic cable, indicators: 575-xxx, height gage: 570-2xx, 192-6xx, type: straight, use for: all digimatic calipers without absolute encoder, 543-4xx, scale unit: 57 digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, 543-6XX, Depth Gages: 547-21X, 571-2XX, 547-25X, 192-67X, Length: 80", 543-2XX, multiplexer, display unit, or similar device.

Mitutoyo 905409, Digimatic Cable, 80", Straight Type - Data out switch type. Use for mitutoyo mini-processors and input tools. Ideal for hands free data input.

More information about Mitutoyo 905409


Similar products



Mitutoyo 06ADV380C USB Input Tool For Use With Digimatic Calipers, Height Gages, And Depth Gauges, With Data Switch


Mitutoyo 06ADV380C - Cable length 80". Mitutoyo input tool, cable length: 2m, display unit, use for: 959149 and 959150 style cables, multiplexer, Convert: Mitutoyo SPC to USB 2 input Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, or similar device. Data out switch type.

. Use to trigger Mitutoyo multiplexers. Sturdy stamped steel foot switch. Usb 2. 0 certification. Ideal for hands free data input. See specifications for usage. Use for mitutoyo mini-processors and input tools. The input tool directly connects the measuring instrument to a USB port on a computer. The values displayed on the measuring instrument can be sent to the computer just by pressing the data switch.

Mitutoyo 06ADV380C USB Input Tool For Use With Digimatic Calipers, Height Gages, And Depth Gauges, With Data Switch - Easier to use than a hand tool finger switch. Data collection can start immediately after connecting the measuring instrument to a computer. Compatible with mitutoyo digimatic instruments with an output feature, including all Digimatic calipers with an Absolute encoder, 571-2XX series depth gauges, 570-2XX series height gauges, and 572-XXX series scale units.

40" length.

More information about Mitutoyo 06ADV380C


Similar products



Mitutoyo 05CZA662, Digimatic Cable, 40", With Data Switch for Coolant Proof Micrometers


Mitutoyo 05CZA662 - Use to trigger Mitutoyo multiplexers. Cable length 80". Ideal for hands free data input. Use for mitutoyo mini-processors and input tools. Data collection can start immediately after connecting the measuring instrument to a computer. Usb 2. 0 certification. Compatible with mitutoyo digimatic instruments with an output feature, 570-2XX series height gauges, 571-2XX series depth gauges, including all Digimatic calipers with an Absolute encoder, and 572-XXX series scale units.

40" length. Easier to use than a hand tool finger switch. Sturdy stamped steel foot switch. See specifications for usage. Mitutoyo digimatic cable, use for: digimatic micrometer ip65 digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, Length: 40", multiplexer, Type: With Data Switch for Coolant Proof Micrometers, display unit, or similar device.

Mitutoyo 05CZA662, Digimatic Cable, 40", With Data Switch for Coolant Proof Micrometers - Data out switch type. See specifications for usage. The values displayed on the measuring instrument can be sent to the computer just by pressing the data switch. The input tool directly connects the measuring instrument to a USB port on a computer.

More information about Mitutoyo 05CZA662


Similar products



Mitutoyo 500-172-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-8" Range


Mitutoyo 500-172-30 - More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Sturdy stamped steel foot switch. They measure outer diameter od, inner diameter ID, and step, depth, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured.

The values displayed on the measuring instrument can be sent to the computer just by pressing the data switch. Data collection can start immediately after connecting the measuring instrument to a computer. This digital caliper has lcd readout and function control buttons on the caliper face, including Origin to set and retain the original measuring point, and Zero/ABS Absolute Scale to zero-set the LCD display.

Mitutoyo 500-172-30 Advanced Onsite Sensor Absolute Scale Digital Caliper, 0-8" Range - Compatible with mitutoyo digimatic instruments with an output feature, 571-2XX series depth gauges, including all Digimatic calipers with an Absolute encoder, 570-2XX series height gauges, and 572-XXX series scale units.40" length. Ideal for hands free data input. It uses the metric measuring system. See specifications for usage.

A rolling thumb wheel makes fine adjustments and a thumb screw locks the scale’s position. Calipers are commonly used in architecture, mechanical engineering, metalworking, and machining.

More information about Mitutoyo 500-172-30


Similar products



Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD


Mitutoyo 500-196-30 - Ideal for hands free data input. The company, founded in tokyo in 1934, formed Mitutoyo America Corporation in 1963 with headquarters in Aurora, IL. What's in the box?electronic calipersr44 batteryProtective case Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, multiplexer, display unit, or similar device.

Data out switch type. Increased battery life - 3. 5 years under normal operation. Measures inside, outside, and step values for versatility. The electronic caliper measures inside, outside, depth, and step values for versatility and includes a protective case and SR44 silver oxide battery. Digital calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements of an object.

Mitutoyo 500-196-30 Advanced Onsite Sensor AOS Absolute Scale Digital Caliper, 0 to 6"/0 to 150mm Measuring Range, 0.0005"/0.01mm Resolution, LCD - The input tool directly connects the measuring instrument to a USB port on a computer. See specifications for usage. Usb 2. 0 certification. Except 500-500-10, 500-501-10, depth, 500-502-10. Includes protective case and SR44 silver oxide battery. The reading is electronically generated and displayed on a digital, high-resolution screen as a single value.

More information about Mitutoyo 500-196-30


Similar products



Sharpie Metallic Permanent Markers, Fine Point, Silver, 12 Count


Sharpie 39100 - Digital readout LCD shows inch or metric units for versatility when measuring. With thumb roller. Ideal for hands free data input. Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, display unit, multiplexer, or similar device. Data out switch type.

Each sharpie metallic fine point marker is filled with quick-drying, fade- and water-resistant ink that's designed to make magnificent marks on almost any surface. Except 500-500-10, depth, 500-501-10, 500-502-10. Includes protective case and SR44 silver oxide battery. Stunning sheen stands out on both light and dark surfaces.

Sharpie Metallic Permanent Markers, Fine Point, Silver, 12 Count - Forget fading with quick-drying, fade- and water-resistant ink; AP certified. Sturdy stamped steel foot switch. Easier to use than a hand tool finger switch. Increased battery life - 3. 5 years under normal operation. Abs sensor - eliminates the necessity of setting the reference when tool is powered on. Go bold with 12 Silver metallic markers.

Measures inside, outside, and step values for versatility.

More information about Sharpie 39100


Similar products



Mitutoyo 959150, Digimatic Cable, 80", With Data Switch


Mitutoyo 959150 - The input tool directly connects the measuring instrument to a USB port on a computer. Authentic metallic finishes in opaque, permanent ink. Compatible with mitutoyo digimatic instruments with an output feature, 570-2XX series height gauges, 571-2XX series depth gauges, including all Digimatic calipers with an Absolute encoder, and 572-XXX series scale units.

40" length. See specifications for usage. Ideal for hands free data input. Measures inside, outside, and step values for versatility. Use to trigger Mitutoyo multiplexers. Skip shaking, save your strength, and immediately enjoy stunning marks--no shaking required. Use for mitutoyo mini-processors and input tools.

Forget fading with quick-drying, fade- and water-resistant ink; AP certified. See specifications for usage. Abs sensor - eliminates the necessity of setting the reference when tool is powered on. Data collection can start immediately after connecting the measuring instrument to a computer. Sturdy stamped steel foot switch.

Mitutoyo 959150, Digimatic Cable, 80", With Data Switch - Mitutoyo digimatic cable, use for: all digimatic calipers with absolute encoder, multiplexer, type: with data switch, display unit, Height Gage: 570-2XX, Scale Unit: 572-XXX Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, Depth Gages: 571-2XX, Length: 80", or similar device.

More information about Mitutoyo 959150


Similar products



Mitutoyo 05CZA624, Digimatic Cable, 40", With Data Switch for Coolant Proof Calipers


Mitutoyo 05CZA624 - See specifications for usage. Fully compatible with existing Mitutoyo digimatic peripherals. Measures inside, outside, and step values for versatility. Use for mitutoyo mini-processors and input tools. Mitutoyo digimatic cable, use for: coolant proof calipers: 500-68x, 500-76x, length: 40", Type: With Data Switch for Coolant Proof Calipers, 500-78X, Coolant Proof Digimatic scale units: 572-61X.

With thumb roller. Stunning sheen stands out on both light and dark surfaces. The input tool directly connects the measuring instrument to a USB port on a computer. Cable length 80". Data collection can start immediately after connecting the measuring instrument to a computer. Authentic metallic finishes in opaque, permanent ink.

Mitutoyo 05CZA624, Digimatic Cable, 40", With Data Switch for Coolant Proof Calipers - Increased battery life - 3. 5 years under normal operation. Advanced onsite sensor AOS electromagnetic inductive sensor for resistance to dirt, oil, and water. See specifications for usage. Go bold with 12 Silver metallic markers. Digimatic output cable outputs data from Digimatic gauges with a data output feature to a Digimatic mini-processor, multiplexer, display unit, or similar device.

More information about Mitutoyo 05CZA624


Similar products