ImpressArt Stamp Enamel

#ad
#ad
ImpressArt Metal Stamps P101-1.1 #ad - Impressart's stamp enamel Marker is a black acrylic ink used to darken stamped impressions so your design will be clearly seen. Bottle features small tip for precise application. Size: 1. 1 oz. Directions: run the tip of your marker over the stamped area from left to right Wait 4-5 minutes Wipe away excess ink with a paper towel An acrylic ink used to darken stamped impressions.

Convenient applicator marker makes highlighting impressions quicker, easier and cleaner. Waterbase, Non Toxic. Water resistant when dry.

More information about ImpressArt Metal Stamps P101-1.1 #ad

ImpressArt- Whimsy Heart Design Stamp, 3mm

#ad
#ad
ImpressArt SC158-K-3MM #ad - For stamping soft metals including brass, copper, aluminum, nickel silver, clay, sterling silver, gold, pewter as well as wood, and matte board. Impression Size: 3mm. These professional quality stamps are created to the highest standard for durability and alignment. Designed by artists for artists, ImpressArt metal stamps will make a lasting impression on your jewelry.

ImpressArt- Whimsy Heart Design Stamp, 3mm #ad - Designs are precision-cut from carbon tool steel, hardened to last project after project.

More information about ImpressArt SC158-K-3MM #ad


Similar products



ImpressArt- Basic Bridgette Lowercase Letter Metal Stamp Set

#ad
#ad
ImpressArt SCE1315-3mm #ad - Avoid wiping with anything wet - water will cause stamps to rust. For stamping soft metals including brass, gold, copper, clay, nickel silver, aluminum, sterling silver, pewter as well as wood, and matte board. Impression Size: 3mm. Impressart's bridgette letter stamps have that hand-written, finger-brushed look, but are also crisp and easy to read.

In order to prevent rust, these stamp sets are lightly coated with oil. Simply wipe down with a dry paper towel or rag before using. This graceful, whispy typeface is perfect for upbeat messages and softer-looking stamped jewelry and craft designs. For stamping soft metals including aluminum, nickel silver, alkeme, pewter, copper, brass, and also wood.

ImpressArt- Basic Bridgette Lowercase Letter Metal Stamp Set #ad - Includes full alphabet and "?" symbol. Size: 3mm will stamp letters approximately 3mm tall.

More information about ImpressArt SCE1315-3mm #ad


Similar products



ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound

#ad
#ad
ImpressArt SC721 #ad - Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. The development of the ergo-angle hammer involved a series of field tests performed by ImpressArt Certified Bench Jewelers, who have identified the optimal striking angle and holding points for precision and comfort when working with metal stamps.

The ergo-angle metal stamping Hammer is a signature ImpressArt tool and an important asset contributing to elevated jewelry stamping. Its weighted brass head and ergonomic features help achieve evenly stamped impressions. Experience the ergo-angle on your next metal stamped project! NOTE: being that the brass head is softer than steel stamps, the brass head will dent and flake when stamping.

ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound #ad - Size: 3mm will stamp letters approximately 3mm tall. This is by design and will not affect the quality of your stamping. For stamping soft metals including brass, clay, aluminum, pewter as well as wood, gold, nickel silver, sterling silver, copper, and matte board. Impression Size: 3mm. For stamping soft metals including aluminum, pewter, nickel silver, alkeme, brass, copper, and also wood.

Includes full alphabet and "?" symbol.

More information about ImpressArt SC721 #ad


Similar products



ImpressArt Bracelet Bending Bar Kit w/ 7 Bracelet Stamping Blanks

#ad
#ad
ImpressArt SC910-KIT #ad - Then do the same for the other end and you have a finished bracelet. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Easily create metal bracelets with this Bracelet Bending Bar Kit. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. Simply place the strip into the notch and bend around the curved arch.

. Essential metal stamping tools and supplies. For stamping soft metals including aluminum, alkeme, nickel silver, brass, copper, pewter, and also wood. Includes full alphabet and "?" symbol. Brass head eliminates double impressions caused by steel head hammers. Easily shapes soft metals into bracelet. Note: before use, tighten brass head with pliers to ensure it's secure on hammer.

ImpressArt Bracelet Bending Bar Kit w/ 7 Bracelet Stamping Blanks #ad - Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. Size: 3mm will stamp letters approximately 3mm tall. For stamping soft metals including brass, aluminum, nickel silver, gold, clay, copper, sterling silver, pewter as well as wood, and matte board. Impression Size: 3mm. The bending Bar easily shapes the aluminum blanks into bracelets.

Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs.

More information about ImpressArt SC910-KIT #ad


Similar products



ImpressArt Stamp Straight Tape

#ad
#ad
ImpressArt SC21-532 #ad - Simply place the strip into the notch and bend around the curved arch. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. Stamp straight Tape allows precise accuracy when stamping letters on metal jewelry. Helps evenly Space Out Letters. Mark stamping Blanks for Accurate Metal Stamping. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge.

Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge. Size: 3mm will stamp letters approximately 3mm tall. For stamping soft metals including aluminum, alkeme, brass, copper, nickel silver, pewter, and also wood. Includes full alphabet and "?" symbol.

ImpressArt Stamp Straight Tape #ad - 1 lb one pound top-weighted, ideal for deep, crisp markings. Now all of your stamps will line up perfectly. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Simply create a straight line with the top edge of the tape along your workpiece to create a guide.

Essential metal stamping tools and supplies. For stamping soft metals including brass, clay, nickel silver, pewter as well as wood, sterling silver, copper, aluminum, gold, and matte board.

More information about ImpressArt SC21-532 #ad


Similar products



ImpressArt Simple Strike Metal Stamping Jig, 3mm Metal Stamping Tools

#ad
#ad
ImpressArt SC10-3mm #ad - Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Holds 3mm ImpressArt metal stamps. Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Protects your fingers and keeps the stamp flush for even impressions.

ImpressArt Simple Strike Metal Stamping Jig, 3mm Metal Stamping Tools #ad - Essential metal stamping tools and supplies. Great beginner metal stamping tool. Simply place the stamp in the jig, hold the jig firmly, and stamp. Brass head eliminates double impressions caused by steel head hammers. Easy grip stamp holder makes stamping easy! Helps evenly Space Out Letters. The jig holds the stamp flush, clear impression while saving your fingers! Includes 3mm heart design stamp For stamping soft metals including brass, copper, so you will always achieve an even, pewter as well as wood, clay, sterling silver, nickel silver, aluminum, gold, and matte board.

Impression Size: 3mm. For stamping soft metals including aluminum, nickel silver, pewter, brass, alkeme, copper, and also wood. Includes full alphabet and "?" symbol. Size: 3mm will stamp letters approximately 3mm tall. 1 lb one pound top-weighted, ideal for deep, crisp markings.

More information about ImpressArt SC10-3mm #ad


Similar products



ImpressArt Steel Bench Block, 2" X 2" Metal Stamping Tools

#ad
#ad
ImpressArt SC22-SMALL #ad - It is 3/8 inch thick and four stick-on rubber feet are included to help protect your work surface and add shock support. Includes free 3mm heart design metal stamp! This steel block provides a solid surface for stamping shaping and flattening metal. Mark stamping Blanks for Accurate Metal Stamping. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge.

ImpressArt Steel Bench Block, 2" X 2" Metal Stamping Tools #ad - Great beginner metal stamping tool. For stamping soft metals including aluminum, alkeme, copper, nickel silver, brass, pewter, and also wood. Includes full alphabet and "?" symbol. Constructed of solid carbon steel. Easy grip stamp holder makes stamping easy! Imported. Small steel metal stamping block. Great size for jewelry stamping blanks.

Essential metal stamping tools and supplies. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. For stamping soft metals including brass, copper, pewter as well as wood, nickel silver, gold, clay, aluminum, sterling silver, and matte board. Impression Size: 3mm.

More information about ImpressArt SC22-SMALL #ad


Similar products



ImpressArt 1 Pound Metal Stamping Hammer

#ad
#ad
ImpressArt SC711 #ad - Surface: 2" x 2" - Height: 3/8". For stamping soft metals including brass, copper, aluminum, nickel silver, gold, clay, pewter as well as wood, sterling silver, and matte board. Impression Size: 3mm. Great size for jewelry stamping blanks. Constructed of solid carbon steel. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide.

Size: 3mm will stamp letters approximately 3mm tall. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. 1 lb one pound top-weighted, ideal for deep, crisp markings. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Brass head can easily be replaced when necessary Replacement SKU: SC721-R.

ImpressArt 1 Pound Metal Stamping Hammer #ad - Small steel metal stamping block. 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Holds 3mm ImpressArt metal stamps. Includes free 3mm heart design metal stamp! Protects your fingers and keeps the stamp flush for even impressions. For stamping soft metals including aluminum, copper, alkeme, pewter, nickel silver, brass, and also wood.

Includes full alphabet and "?" symbol.

More information about ImpressArt SC711 #ad


Similar products



Beadaholique Solid Metal Bench Block Wire Hardening and Wire Wrapping Tool

#ad
#ad
Beadaholique BB44 #ad - Great size for jewelry stamping blanks. Measurements: 4 inch x 4 Inch, 3/4 Inch thick. Surface: 2" x 2" - Height: 3/8". Mark stamping Blanks for Accurate Metal Stamping. Simply place the strip into the notch and bend around the curved arch. Includes: 7 aluminum bracelet Blanks, 5/8" x 6", 14 gauge. Constructed of solid carbon steel.

Includes rubber feet for surface grip, shock absorption, and noise reduction. Brass head can easily be replaced when necessary Replacement SKU: SC721-R. Great beginner metal stamping tool. Protects your fingers and keeps the stamp flush for even impressions. 1 lb one pound top-weighted, ideal for deep, crisp markings.

Beadaholique Solid Metal Bench Block Wire Hardening and Wire Wrapping Tool #ad - 1 pound brass head creates crisp even impressions. Easily shapes soft metals into bracelet. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. First ever hammer designed specially for metal stamping. Item weighs over two pounds. Essential metal stamping tools and supplies. Durable, smooth surface for work hardening wire or other metal smithing projects.

More information about Beadaholique BB44 #ad


Similar products



ImpressArt- Basic Newsprint Uppercase Letter Metal Stamp Set

#ad
#ad
ImpressArt SCE1216-3MM #ad - Includes free 3mm heart design metal stamp! Protects your fingers and keeps the stamp flush for even impressions. Constructed of solid carbon steel. Accommodates bracelet stamping blanks, up to 1 1/2" inch wide. Note: before use, tighten brass head with pliers to ensure it's secure on hammer. Small steel metal stamping block.

Essential metal stamping tools and supplies. Surface: 2" x 2" - Height: 3/8". Simply wipe down with a dry paper towel or rag before using. 1 pound brass head creates crisp even impressions. Ergo-angle developed for comfort and leveled-striking when metal stamping letters, numbers, and designs. Uppercase Stamps.

ImpressArt- Basic Newsprint Uppercase Letter Metal Stamp Set #ad - Brass head eliminates double impressions caused by steel head hammers. In order to prevent rust, these stamp sets are lightly coated with oil. Brass head prolongs the life of your metal stamps. Avoid wiping with anything wet - water will cause stamps to rust. For stamping soft metals including brass, clay, sterling silver, gold, copper, pewter as well as wood, nickel silver, aluminum, and matte board.

Impression Size: 3mm. For stamping soft metals including aluminum, alkeme, copper, nickel silver, pewter, brass, and also wood.

More information about ImpressArt SCE1216-3MM #ad


Similar products